fix: allow content as wire name

doc/examples.typ

@@ -71,30 +71,6 @@ wire.wire("w4", ("p6","p7"), style: "guided",
 
 ```, vertical: true)
 
-#let zigzag-at = example(
-  ```
-  // `zigzag-at` places the middle bend of a zigzag wire
-  // on the axis of a referenced anchor, overriding
-  // `zigzag-ratio`.
-  element.block(x: 0, y: 0, w: 1.5, h: 1.5, id: "src",
-    ports: (east: ((id: "o", name: "O"),),))
-  element.block(x: 3, y: -1.2, w: 1, h: 1, id: "ref",
-    fill: util.colors.pink,
-    ports: (west: ((id: "p", name: "R"),),))
-  element.block(x: 5.5, y: -2, w: 1.5, h: 1.5, id: "dst",
-    ports: (west: ((id: "i", name: "I"),),))
-  // String form: anchor name of a port.
-  wire.wire("w1", ("src-port-o", "dst-port-i"),
-            style: "zigzag",
-            zigzag-at: "ref-port-p")
-  // Ergonomic offset: shift 8pt right of ref.east.
-  wire.wire("w2", ("src-port-o", "dst-port-i"),
-            style: "zigzag",
-            zigzag-at: (rel: 8pt, to: "ref.east"))
-  ```,
-  vertical: true,
-)
-
 #let stub = example(```
 draw.circle((0, 0), radius: .1, name: "p")
 wire.stub("p", "north", name: "north", length: 1)

src/wire.typ

@@ -24,123 +24,29 @@
   return (pts, anchors)
 }
 
-// Normalize an anchor-based placement value used by `zigzag-at`, `u-at`, and
-// the `s-at-*` family.
-//
-// `axis` selects which cartesian component the offset applies to:
-//   - `"x"` → offset in x (used when the placement fixes an x coordinate, e.g.
-//             a vertical bend line for horizontal wire flow).
-//   - `"y"` → offset in y (used when the placement fixes a y coordinate).
-//
-// Accepted forms:
-//   - `none`                              → unset; caller falls back to
-//                                           depth/ratio-based placement.
-//   - `str` / tuple / native CeTZ dict    → passed through as a CeTZ coordinate.
-//   - `(rel: <length>, to: <coord>)` with a *scalar* `rel`
-//                                         → ergonomic axial offset, rewritten
-//                                           to `(rel: (rel, 0), to: to)` for
-//                                           `axis == "x"` or
-//                                           `(rel: (0, rel), to: to)` for
-//                                           `axis == "y"`. If `rel` is already
-//                                           an array/tuple, the value is
-//                                           passed through unchanged.
-#let normalize-scalar-offset(at, axis) = {
-  if at == none { return none }
-  if type(at) == dictionary and "rel" in at and "to" in at and type(at.rel) != array {
-    let r = at.rel
-    if axis == "x" {
-      return (rel: (r, 0), to: at.to)
-    } else {
-      return (rel: (0, r), to: at.to)
-    }
-  }
-  return at
-}
-
-// Backwards-compatible wrapper: translates the old `dir` vocabulary
-// (`"vertical"` / `"horizontal"`) to the `axis` vocabulary used by
-// `normalize-scalar-offset`.
-#let normalize-zigzag-at(at, dir) = {
-  let axis = if dir == "vertical" { "x" } else { "y" }
-  return normalize-scalar-offset(at, axis)
-}
-
-// Try to deduce the cardinal side a port anchor faces by comparing its
-// position to the center of the element it belongs to. Returns none if the
-// anchor is not a port-style anchor (i.e. does not contain "-port-") or if
-// resolution fails.
-#let detect-port-side(anchor, ctx) = {
-  if type(anchor) != str { return none }
-  let sep = "-port-"
-  if not anchor.contains(sep) { return none }
-  let elmt-id = anchor.split(sep).first()
-  let port-pos = none
-  let center-pos = none
-  // coordinate.resolve panics on unknown anchors; there is no try/catch in
-  // Typst, so we assume port anchors created by add-port always come with a
-  // matching group of the same name. If not, the user must set the relevant side parameter
-  // explicitly.
-  let (_, p1) = coordinate.resolve(ctx, anchor)
-  let (_, p2) = coordinate.resolve(ctx, elmt-id + ".center")
-  port-pos = p1
-  center-pos = p2
-  let dx = port-pos.at(0) - center-pos.at(0)
-  let dy = port-pos.at(1) - center-pos.at(1)
-  if calc.abs(dx) >= calc.abs(dy) {
-    return if dx >= 0 { "east" } else { "west" }
-  } else {
-    return if dy >= 0 { "north" } else { "south" }
-  }
-}
-
-#let get-zigzag-wire(pts, ratio, dir, at: none) = {
+#let get-zigzag-wire(pts, ratio, dir) = {
   let start = pts.first()
   let end = pts.last()
-
-  let points
-  if at == none {
-    // Ratio-based placement (default).
-    let mid = if dir == "vertical" {
-      (start, ratio, (horizontal: end, vertical: ()))
-    } else {
-      (start, ratio, (horizontal: (), vertical: end))
-    }
-
-    points = if dir == "vertical" {
-      (
-        start,
-        (horizontal: mid, vertical: ()),
-        (horizontal: (), vertical: end),
-        end
-      )
-    } else {
-      (
-        start,
-        (horizontal: (), vertical: mid),
-        (horizontal: end, vertical: ()),
-        end
-      )
-    }
+  let mid = if dir == "vertical" {
+    (start, ratio, (horizontal: end, vertical: ()))
   } else {
-    // Anchor-based placement: the middle bend segment sits on the axis
-    // extracted from `at` via CeTZ's perpendicular operator `|-`:
-    //   - vertical:   middle segment at x = at.x
-    //   - horizontal: middle segment at y = at.y
-    points = if dir == "vertical" {
-      (
-        start,
-        (at, "|-", start),
-        (at, "|-", end),
-        end
-      )
-    } else {
-      (
-        start,
-        (start, "|-", at),
-        (end, "|-", at),
-        end
-      )
-    }
+    (start, ratio, (horizontal: (), vertical: end))
+  }
+
+  let points = if dir == "vertical" {
+    (
+      start,
+      (horizontal: mid, vertical: ()),
+      (horizontal: (), vertical: end),
+      end
+    )
+  } else {
+    (
+      start,
+      (horizontal: (), vertical: mid),
+      (horizontal: end, vertical: ()),
+      end
+    )
   }
   let anchors = (
     "start": start,
@@ -298,9 +204,8 @@
 /// - reverse (bool): If true, the start and end points will be swapped (useful in cases where the start point depends on the end point, for example with perpendiculars)
 /// - directed (bool): If true, the wire will be directed, meaning an arrow will be drawn at the endpoint
 /// - rotate-name (bool): If true, the name will be rotated according to the wire's slope
-/// - zigzag-ratio (auto, ratio): Position of the zigzag middle bend segment relative to the horizontal (or vertical) span, as a fraction between the two endpoints (only with style "zigzag"). Defaults to `auto`, which resolves to `50%`. Panics if combined with an explicitly set `zigzag-at`.
+/// - zigzag-ratio (ratio): Position of the zigzag vertical relative to the horizontal span (only with style "zigzag")
 /// - zigzag-dir (str): The zigzag's direction. As either "vertical" or "horizontal" (only with dstyle "zigzag")
-/// - zigzag-at (none, str, array, dictionary): Optional. Anchor-based placement of the zigzag middle bend segment (only with style "zigzag"). When set, overrides `zigzag-ratio` (which must be left at its default `auto`). The middle segment sits on the axis extracted from the given coordinate: `x` for `zigzag-dir: "vertical"`, `y` for `"horizontal"`. Accepted forms: a raw CeTZ anchor name string (e.g. `"elmt.center"` or `"elmt-port-a"`); any native CeTZ coordinate (tuple, dict such as `(rel: (dx, dy), to: anchor)`); or the ergonomic scalar-offset form `(rel: <length>, to: <coord>)`, which is rewritten to a `(dx, 0)` offset for `"vertical"` and `(0, dy)` for `"horizontal"`. See #examples.zigzag-at
 /// - dodge-y (number): Y position to dodge the wire to (only with style "dodge")
 /// - dodge-sides (array): The start and end sides (going out of the connected element) of the wire (only with style "dodge")
 /// - dodge-margins (array): The start and end margins (i.e. space before dodging) of the wire (only with style "dodge")
@@ -322,9 +227,8 @@
   guided-sides: ("east", "west"),
   directed: false,
   rotate-name: true,
-  zigzag-ratio: auto,
+  zigzag-ratio: 50%,
   zigzag-dir: "vertical",
-  zigzag-at: none,
   dodge-y: 0,
   dodge-sides: ("east", "west"),
   dodge-margins: (5%, 5%)
@@ -337,19 +241,6 @@
     panic("Wrong number of points (got " + str(pts.len()) + " instead of 2)")
   }
 
-  // `zigzag-at` validation.
-  if zigzag-at != none {
-    if style != "zigzag" {
-      panic("wire '" + id + "': `zigzag-at` requires style: \"zigzag\" (got \""
-        + style + "\")")
-    }
-    if zigzag-ratio != auto {
-      panic("wire '" + id
-        + "': cannot combine `zigzag-at` with an explicit `zigzag-ratio`")
-    }
-  }
-  let zigzag-ratio-effective = if zigzag-ratio == auto { 50% } else { zigzag-ratio }
-
   // Normalize user-provided coordinates: (x, y) -> (x, y, 0)
   let pts = pts.map(normalize-coord)
   
@@ -368,12 +259,7 @@
     (points, anchors) = get-direct-wire(pts)
     
   } else if style == "zigzag" {
-    (points, anchors) = get-zigzag-wire(
-      pts,
-      zigzag-ratio-effective,
-      zigzag-dir,
-      at: normalize-zigzag-at(zigzag-at, zigzag-dir),
-    )
+    (points, anchors) = get-zigzag-wire(pts, zigzag-ratio, zigzag-dir)
     
   } else if style == "dodge" {
     (points, anchors) = get-dodge-wire(
@@ -428,7 +314,7 @@
   if name != none {
     let names = ()
     
-    if type(name) == str {
+    if type(name) == str or type(name) == content {
       names = ((name, name-pos),)
       
     } else if type(name) == array {