Initial commit
This commit is contained in:
File diff suppressed because it is too large
Load Diff
@@ -0,0 +1,275 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f7xx_hal.h
|
||||
* @author MCD Application Team
|
||||
* @brief This file contains all the functions prototypes for the HAL
|
||||
* module driver.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F7xx_HAL_H
|
||||
#define __STM32F7xx_HAL_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f7xx_hal_conf.h"
|
||||
|
||||
/** @addtogroup STM32F7xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup HAL
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
|
||||
/** @defgroup HAL_Exported_Constants HAL Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup HAL_TICK_FREQ Tick Frequency
|
||||
* @{
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_TICK_FREQ_10HZ = 100U,
|
||||
HAL_TICK_FREQ_100HZ = 10U,
|
||||
HAL_TICK_FREQ_1KHZ = 1U,
|
||||
HAL_TICK_FREQ_DEFAULT = HAL_TICK_FREQ_1KHZ
|
||||
} HAL_TickFreqTypeDef;
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup SYSCFG_BootMode Boot Mode
|
||||
* @{
|
||||
*/
|
||||
#define SYSCFG_MEM_BOOT_ADD0 ((uint32_t)0x00000000U)
|
||||
#define SYSCFG_MEM_BOOT_ADD1 SYSCFG_MEMRMP_MEM_BOOT
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/** @defgroup HAL_Exported_Macros HAL Exported Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @brief Freeze/Unfreeze Peripherals in Debug mode
|
||||
*/
|
||||
#define __HAL_DBGMCU_FREEZE_TIM2() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM2_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_TIM3() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM3_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_TIM4() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM4_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_TIM5() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM5_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_TIM6() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM6_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_TIM7() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM7_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_TIM12() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM12_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_TIM13() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM13_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_TIM14() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM14_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_LPTIM1() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_LPTIM1_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_RTC() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_RTC_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_WWDG() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_WWDG_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_IWDG() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_IWDG_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT))
|
||||
#define __HAL_DBGMCU_FREEZE_I2C2_TIMEOUT() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT))
|
||||
#define __HAL_DBGMCU_FREEZE_I2C3_TIMEOUT() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT))
|
||||
#define __HAL_DBGMCU_FREEZE_I2C4_TIMEOUT() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C4_SMBUS_TIMEOUT))
|
||||
#define __HAL_DBGMCU_FREEZE_CAN1() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_CAN1_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_CAN2() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_CAN2_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_TIM1() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM1_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_TIM8() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM8_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_TIM9() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM9_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_TIM10() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM10_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_TIM11() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM11_STOP))
|
||||
|
||||
#define __HAL_DBGMCU_UNFREEZE_TIM2() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM2_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_TIM3() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM3_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_TIM4() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM4_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_TIM5() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM5_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_TIM6() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM6_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_TIM7() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM7_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_TIM12() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM12_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_TIM13() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM13_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_TIM14() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM14_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_LPTIM1() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_LPTIM1_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_RTC() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_RTC_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_WWDG() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_WWDG_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_IWDG() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_IWDG_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT))
|
||||
#define __HAL_DBGMCU_UNFREEZE_I2C2_TIMEOUT() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT))
|
||||
#define __HAL_DBGMCU_UNFREEZE_I2C3_TIMEOUT() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT))
|
||||
#define __HAL_DBGMCU_UNFREEZE_I2C4_TIMEOUT() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C4_SMBUS_TIMEOUT))
|
||||
#define __HAL_DBGMCU_UNFREEZE_CAN1() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_CAN1_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_CAN2() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_CAN2_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_TIM1() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM1_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_TIM8() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM8_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_TIM9() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM9_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_TIM10() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM10_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_TIM11() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM11_STOP))
|
||||
|
||||
|
||||
/** @brief FMC (NOR/RAM) mapped at 0x60000000 and SDRAM mapped at 0xC0000000
|
||||
*/
|
||||
#define __HAL_SYSCFG_REMAPMEMORY_FMC() (SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_SWP_FMC))
|
||||
|
||||
|
||||
/** @brief FMC/SDRAM mapped at 0x60000000 (NOR/RAM) mapped at 0xC0000000
|
||||
*/
|
||||
#define __HAL_SYSCFG_REMAPMEMORY_FMC_SDRAM() do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_SWP_FMC);\
|
||||
SYSCFG->MEMRMP |= (SYSCFG_MEMRMP_SWP_FMC_0);\
|
||||
}while(0);
|
||||
/**
|
||||
* @brief Return the memory boot mapping as configured by user.
|
||||
* @retval The boot mode as configured by user. The returned value can be one
|
||||
* of the following values:
|
||||
* @arg @ref SYSCFG_MEM_BOOT_ADD0
|
||||
* @arg @ref SYSCFG_MEM_BOOT_ADD1
|
||||
*/
|
||||
#define __HAL_SYSCFG_GET_BOOT_MODE() READ_BIT(SYSCFG->MEMRMP, SYSCFG_MEMRMP_MEM_BOOT)
|
||||
|
||||
#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
|
||||
/** @brief SYSCFG Break Cortex-M7 Lockup lock.
|
||||
* Enable and lock the connection of Cortex-M7 LOCKUP (Hardfault) output to TIM1/8 Break input.
|
||||
* @note The selected configuration is locked and can be unlocked only by system reset.
|
||||
*/
|
||||
#define __HAL_SYSCFG_BREAK_LOCKUP_LOCK() SET_BIT(SYSCFG->CBR, SYSCFG_CBR_CLL)
|
||||
|
||||
/** @brief SYSCFG Break PVD lock.
|
||||
* Enable and lock the PVD connection to Timer1/8 Break input, as well as the PVDE and PLS[2:0] in the PWR_CR1 register.
|
||||
* @note The selected configuration is locked and can be unlocked only by system reset.
|
||||
*/
|
||||
#define __HAL_SYSCFG_BREAK_PVD_LOCK() SET_BIT(SYSCFG->CBR, SYSCFG_CBR_PVDL)
|
||||
#endif /* STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup HAL_Private_Macros HAL Private Macros
|
||||
* @{
|
||||
*/
|
||||
#define IS_TICKFREQ(FREQ) (((FREQ) == HAL_TICK_FREQ_10HZ) || \
|
||||
((FREQ) == HAL_TICK_FREQ_100HZ) || \
|
||||
((FREQ) == HAL_TICK_FREQ_1KHZ))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup HAL_Exported_Functions
|
||||
* @{
|
||||
*/
|
||||
/** @addtogroup HAL_Exported_Functions_Group1
|
||||
* @{
|
||||
*/
|
||||
/* Initialization and Configuration functions ******************************/
|
||||
HAL_StatusTypeDef HAL_Init(void);
|
||||
HAL_StatusTypeDef HAL_DeInit(void);
|
||||
void HAL_MspInit(void);
|
||||
void HAL_MspDeInit(void);
|
||||
HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported variables ---------------------------------------------------------*/
|
||||
/** @addtogroup HAL_Exported_Variables
|
||||
* @{
|
||||
*/
|
||||
extern __IO uint32_t uwTick;
|
||||
extern uint32_t uwTickPrio;
|
||||
extern HAL_TickFreqTypeDef uwTickFreq;
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup HAL_Exported_Functions_Group2
|
||||
* @{
|
||||
*/
|
||||
/* Peripheral Control functions ************************************************/
|
||||
void HAL_IncTick(void);
|
||||
void HAL_Delay(uint32_t Delay);
|
||||
uint32_t HAL_GetTick(void);
|
||||
uint32_t HAL_GetTickPrio(void);
|
||||
HAL_StatusTypeDef HAL_SetTickFreq(HAL_TickFreqTypeDef Freq);
|
||||
HAL_TickFreqTypeDef HAL_GetTickFreq(void);
|
||||
void HAL_SuspendTick(void);
|
||||
void HAL_ResumeTick(void);
|
||||
uint32_t HAL_GetHalVersion(void);
|
||||
uint32_t HAL_GetREVID(void);
|
||||
uint32_t HAL_GetDEVID(void);
|
||||
uint32_t HAL_GetUIDw0(void);
|
||||
uint32_t HAL_GetUIDw1(void);
|
||||
uint32_t HAL_GetUIDw2(void);
|
||||
void HAL_DBGMCU_EnableDBGSleepMode(void);
|
||||
void HAL_DBGMCU_DisableDBGSleepMode(void);
|
||||
void HAL_DBGMCU_EnableDBGStopMode(void);
|
||||
void HAL_DBGMCU_DisableDBGStopMode(void);
|
||||
void HAL_DBGMCU_EnableDBGStandbyMode(void);
|
||||
void HAL_DBGMCU_DisableDBGStandbyMode(void);
|
||||
void HAL_EnableCompensationCell(void);
|
||||
void HAL_DisableCompensationCell(void);
|
||||
void HAL_EnableFMCMemorySwapping(void);
|
||||
void HAL_DisableFMCMemorySwapping(void);
|
||||
#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
|
||||
void HAL_EnableMemorySwappingBank(void);
|
||||
void HAL_DisableMemorySwappingBank(void);
|
||||
#endif /* STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/** @defgroup HAL_Private_Variables HAL Private Variables
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/** @defgroup HAL_Private_Constants HAL Private Constants
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32F7xx_HAL_H */
|
||||
|
||||
|
||||
@@ -0,0 +1,404 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f7xx_hal_cortex.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of CORTEX HAL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file in
|
||||
* the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F7xx_HAL_CORTEX_H
|
||||
#define __STM32F7xx_HAL_CORTEX_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f7xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F7xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup CORTEX
|
||||
* @{
|
||||
*/
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/** @defgroup CORTEX_Exported_Types Cortex Exported Types
|
||||
* @{
|
||||
*/
|
||||
|
||||
#if (__MPU_PRESENT == 1)
|
||||
/** @defgroup CORTEX_MPU_Region_Initialization_Structure_definition MPU Region Initialization Structure Definition
|
||||
* @brief MPU Region initialization structure
|
||||
* @{
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint8_t Enable; /*!< Specifies the status of the region.
|
||||
This parameter can be a value of @ref CORTEX_MPU_Region_Enable */
|
||||
uint8_t Number; /*!< Specifies the number of the region to protect.
|
||||
This parameter can be a value of @ref CORTEX_MPU_Region_Number */
|
||||
uint32_t BaseAddress; /*!< Specifies the base address of the region to protect. */
|
||||
uint8_t Size; /*!< Specifies the size of the region to protect.
|
||||
This parameter can be a value of @ref CORTEX_MPU_Region_Size */
|
||||
uint8_t SubRegionDisable; /*!< Specifies the number of the subregion protection to disable.
|
||||
This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF */
|
||||
uint8_t TypeExtField; /*!< Specifies the TEX field level.
|
||||
This parameter can be a value of @ref CORTEX_MPU_TEX_Levels */
|
||||
uint8_t AccessPermission; /*!< Specifies the region access permission type.
|
||||
This parameter can be a value of @ref CORTEX_MPU_Region_Permission_Attributes */
|
||||
uint8_t DisableExec; /*!< Specifies the instruction access status.
|
||||
This parameter can be a value of @ref CORTEX_MPU_Instruction_Access */
|
||||
uint8_t IsShareable; /*!< Specifies the shareability status of the protected region.
|
||||
This parameter can be a value of @ref CORTEX_MPU_Access_Shareable */
|
||||
uint8_t IsCacheable; /*!< Specifies the cacheable status of the region protected.
|
||||
This parameter can be a value of @ref CORTEX_MPU_Access_Cacheable */
|
||||
uint8_t IsBufferable; /*!< Specifies the bufferable status of the protected region.
|
||||
This parameter can be a value of @ref CORTEX_MPU_Access_Bufferable */
|
||||
}MPU_Region_InitTypeDef;
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#endif /* __MPU_PRESENT */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
|
||||
/** @defgroup CORTEX_Exported_Constants CORTEX Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_Preemption_Priority_Group CORTEX Preemption Priority Group
|
||||
* @{
|
||||
*/
|
||||
#define NVIC_PRIORITYGROUP_0 ((uint32_t)0x00000007U) /*!< 0 bits for pre-emption priority
|
||||
4 bits for subpriority */
|
||||
#define NVIC_PRIORITYGROUP_1 ((uint32_t)0x00000006U) /*!< 1 bits for pre-emption priority
|
||||
3 bits for subpriority */
|
||||
#define NVIC_PRIORITYGROUP_2 ((uint32_t)0x00000005U) /*!< 2 bits for pre-emption priority
|
||||
2 bits for subpriority */
|
||||
#define NVIC_PRIORITYGROUP_3 ((uint32_t)0x00000004U) /*!< 3 bits for pre-emption priority
|
||||
1 bits for subpriority */
|
||||
#define NVIC_PRIORITYGROUP_4 ((uint32_t)0x00000003U) /*!< 4 bits for pre-emption priority
|
||||
0 bits for subpriority */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_SysTick_clock_source CORTEX _SysTick clock source
|
||||
* @{
|
||||
*/
|
||||
#define SYSTICK_CLKSOURCE_HCLK_DIV8 ((uint32_t)0x00000000U)
|
||||
#define SYSTICK_CLKSOURCE_HCLK ((uint32_t)0x00000004U)
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#if (__MPU_PRESENT == 1)
|
||||
/** @defgroup CORTEX_MPU_HFNMI_PRIVDEF_Control MPU HFNMI and PRIVILEGED Access control
|
||||
* @{
|
||||
*/
|
||||
#define MPU_HFNMI_PRIVDEF_NONE ((uint32_t)0x00000000U)
|
||||
#define MPU_HARDFAULT_NMI ((uint32_t)0x00000002U)
|
||||
#define MPU_PRIVILEGED_DEFAULT ((uint32_t)0x00000004U)
|
||||
#define MPU_HFNMI_PRIVDEF ((uint32_t)0x00000006U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_MPU_Region_Enable CORTEX MPU Region Enable
|
||||
* @{
|
||||
*/
|
||||
#define MPU_REGION_ENABLE ((uint8_t)0x01U)
|
||||
#define MPU_REGION_DISABLE ((uint8_t)0x00U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_MPU_Instruction_Access CORTEX MPU Instruction Access
|
||||
* @{
|
||||
*/
|
||||
#define MPU_INSTRUCTION_ACCESS_ENABLE ((uint8_t)0x00U)
|
||||
#define MPU_INSTRUCTION_ACCESS_DISABLE ((uint8_t)0x01U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_MPU_Access_Shareable CORTEX MPU Instruction Access Shareable
|
||||
* @{
|
||||
*/
|
||||
#define MPU_ACCESS_SHAREABLE ((uint8_t)0x01U)
|
||||
#define MPU_ACCESS_NOT_SHAREABLE ((uint8_t)0x00U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_MPU_Access_Cacheable CORTEX MPU Instruction Access Cacheable
|
||||
* @{
|
||||
*/
|
||||
#define MPU_ACCESS_CACHEABLE ((uint8_t)0x01U)
|
||||
#define MPU_ACCESS_NOT_CACHEABLE ((uint8_t)0x00U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_MPU_Access_Bufferable CORTEX MPU Instruction Access Bufferable
|
||||
* @{
|
||||
*/
|
||||
#define MPU_ACCESS_BUFFERABLE ((uint8_t)0x01U)
|
||||
#define MPU_ACCESS_NOT_BUFFERABLE ((uint8_t)0x00U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_MPU_TEX_Levels MPU TEX Levels
|
||||
* @{
|
||||
*/
|
||||
#define MPU_TEX_LEVEL0 ((uint8_t)0x00U)
|
||||
#define MPU_TEX_LEVEL1 ((uint8_t)0x01U)
|
||||
#define MPU_TEX_LEVEL2 ((uint8_t)0x02U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_MPU_Region_Size CORTEX MPU Region Size
|
||||
* @{
|
||||
*/
|
||||
#define MPU_REGION_SIZE_32B ((uint8_t)0x04U)
|
||||
#define MPU_REGION_SIZE_64B ((uint8_t)0x05U)
|
||||
#define MPU_REGION_SIZE_128B ((uint8_t)0x06U)
|
||||
#define MPU_REGION_SIZE_256B ((uint8_t)0x07U)
|
||||
#define MPU_REGION_SIZE_512B ((uint8_t)0x08U)
|
||||
#define MPU_REGION_SIZE_1KB ((uint8_t)0x09U)
|
||||
#define MPU_REGION_SIZE_2KB ((uint8_t)0x0AU)
|
||||
#define MPU_REGION_SIZE_4KB ((uint8_t)0x0BU)
|
||||
#define MPU_REGION_SIZE_8KB ((uint8_t)0x0CU)
|
||||
#define MPU_REGION_SIZE_16KB ((uint8_t)0x0DU)
|
||||
#define MPU_REGION_SIZE_32KB ((uint8_t)0x0EU)
|
||||
#define MPU_REGION_SIZE_64KB ((uint8_t)0x0FU)
|
||||
#define MPU_REGION_SIZE_128KB ((uint8_t)0x10U)
|
||||
#define MPU_REGION_SIZE_256KB ((uint8_t)0x11U)
|
||||
#define MPU_REGION_SIZE_512KB ((uint8_t)0x12U)
|
||||
#define MPU_REGION_SIZE_1MB ((uint8_t)0x13U)
|
||||
#define MPU_REGION_SIZE_2MB ((uint8_t)0x14U)
|
||||
#define MPU_REGION_SIZE_4MB ((uint8_t)0x15U)
|
||||
#define MPU_REGION_SIZE_8MB ((uint8_t)0x16U)
|
||||
#define MPU_REGION_SIZE_16MB ((uint8_t)0x17U)
|
||||
#define MPU_REGION_SIZE_32MB ((uint8_t)0x18U)
|
||||
#define MPU_REGION_SIZE_64MB ((uint8_t)0x19U)
|
||||
#define MPU_REGION_SIZE_128MB ((uint8_t)0x1AU)
|
||||
#define MPU_REGION_SIZE_256MB ((uint8_t)0x1BU)
|
||||
#define MPU_REGION_SIZE_512MB ((uint8_t)0x1CU)
|
||||
#define MPU_REGION_SIZE_1GB ((uint8_t)0x1DU)
|
||||
#define MPU_REGION_SIZE_2GB ((uint8_t)0x1EU)
|
||||
#define MPU_REGION_SIZE_4GB ((uint8_t)0x1FU)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_MPU_Region_Permission_Attributes CORTEX MPU Region Permission Attributes
|
||||
* @{
|
||||
*/
|
||||
#define MPU_REGION_NO_ACCESS ((uint8_t)0x00U)
|
||||
#define MPU_REGION_PRIV_RW ((uint8_t)0x01U)
|
||||
#define MPU_REGION_PRIV_RW_URO ((uint8_t)0x02U)
|
||||
#define MPU_REGION_FULL_ACCESS ((uint8_t)0x03U)
|
||||
#define MPU_REGION_PRIV_RO ((uint8_t)0x05U)
|
||||
#define MPU_REGION_PRIV_RO_URO ((uint8_t)0x06U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_MPU_Region_Number CORTEX MPU Region Number
|
||||
* @{
|
||||
*/
|
||||
#define MPU_REGION_NUMBER0 ((uint8_t)0x00U)
|
||||
#define MPU_REGION_NUMBER1 ((uint8_t)0x01U)
|
||||
#define MPU_REGION_NUMBER2 ((uint8_t)0x02U)
|
||||
#define MPU_REGION_NUMBER3 ((uint8_t)0x03U)
|
||||
#define MPU_REGION_NUMBER4 ((uint8_t)0x04U)
|
||||
#define MPU_REGION_NUMBER5 ((uint8_t)0x05U)
|
||||
#define MPU_REGION_NUMBER6 ((uint8_t)0x06U)
|
||||
#define MPU_REGION_NUMBER7 ((uint8_t)0x07U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#endif /* __MPU_PRESENT */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/* Exported Macros -----------------------------------------------------------*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup CORTEX_Exported_Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup CORTEX_Exported_Functions_Group1
|
||||
* @{
|
||||
*/
|
||||
/* Initialization and de-initialization functions *****************************/
|
||||
void HAL_NVIC_SetPriorityGrouping(uint32_t PriorityGroup);
|
||||
void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority);
|
||||
void HAL_NVIC_EnableIRQ(IRQn_Type IRQn);
|
||||
void HAL_NVIC_DisableIRQ(IRQn_Type IRQn);
|
||||
void HAL_NVIC_SystemReset(void);
|
||||
uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup CORTEX_Exported_Functions_Group2
|
||||
* @{
|
||||
*/
|
||||
/* Peripheral Control functions ***********************************************/
|
||||
#if (__MPU_PRESENT == 1)
|
||||
void HAL_MPU_Enable(uint32_t MPU_Control);
|
||||
void HAL_MPU_Disable(void);
|
||||
void HAL_MPU_ConfigRegion(MPU_Region_InitTypeDef *MPU_Init);
|
||||
#endif /* __MPU_PRESENT */
|
||||
uint32_t HAL_NVIC_GetPriorityGrouping(void);
|
||||
void HAL_NVIC_GetPriority(IRQn_Type IRQn, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority);
|
||||
uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn);
|
||||
void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn);
|
||||
void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn);
|
||||
uint32_t HAL_NVIC_GetActive(IRQn_Type IRQn);
|
||||
void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource);
|
||||
void HAL_SYSTICK_IRQHandler(void);
|
||||
void HAL_SYSTICK_Callback(void);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup CORTEX_Private_Macros CORTEX Private Macros
|
||||
* @{
|
||||
*/
|
||||
#define IS_NVIC_PRIORITY_GROUP(GROUP) (((GROUP) == NVIC_PRIORITYGROUP_0) || \
|
||||
((GROUP) == NVIC_PRIORITYGROUP_1) || \
|
||||
((GROUP) == NVIC_PRIORITYGROUP_2) || \
|
||||
((GROUP) == NVIC_PRIORITYGROUP_3) || \
|
||||
((GROUP) == NVIC_PRIORITYGROUP_4))
|
||||
|
||||
#define IS_NVIC_PREEMPTION_PRIORITY(PRIORITY) ((PRIORITY) < 0x10U)
|
||||
|
||||
#define IS_NVIC_SUB_PRIORITY(PRIORITY) ((PRIORITY) < 0x10U)
|
||||
|
||||
#define IS_NVIC_DEVICE_IRQ(IRQ) ((IRQ) >= 0x00)
|
||||
|
||||
#define IS_SYSTICK_CLK_SOURCE(SOURCE) (((SOURCE) == SYSTICK_CLKSOURCE_HCLK) || \
|
||||
((SOURCE) == SYSTICK_CLKSOURCE_HCLK_DIV8))
|
||||
|
||||
#if (__MPU_PRESENT == 1)
|
||||
#define IS_MPU_REGION_ENABLE(STATE) (((STATE) == MPU_REGION_ENABLE) || \
|
||||
((STATE) == MPU_REGION_DISABLE))
|
||||
|
||||
#define IS_MPU_INSTRUCTION_ACCESS(STATE) (((STATE) == MPU_INSTRUCTION_ACCESS_ENABLE) || \
|
||||
((STATE) == MPU_INSTRUCTION_ACCESS_DISABLE))
|
||||
|
||||
#define IS_MPU_ACCESS_SHAREABLE(STATE) (((STATE) == MPU_ACCESS_SHAREABLE) || \
|
||||
((STATE) == MPU_ACCESS_NOT_SHAREABLE))
|
||||
|
||||
#define IS_MPU_ACCESS_CACHEABLE(STATE) (((STATE) == MPU_ACCESS_CACHEABLE) || \
|
||||
((STATE) == MPU_ACCESS_NOT_CACHEABLE))
|
||||
|
||||
#define IS_MPU_ACCESS_BUFFERABLE(STATE) (((STATE) == MPU_ACCESS_BUFFERABLE) || \
|
||||
((STATE) == MPU_ACCESS_NOT_BUFFERABLE))
|
||||
|
||||
#define IS_MPU_TEX_LEVEL(TYPE) (((TYPE) == MPU_TEX_LEVEL0) || \
|
||||
((TYPE) == MPU_TEX_LEVEL1) || \
|
||||
((TYPE) == MPU_TEX_LEVEL2))
|
||||
|
||||
#define IS_MPU_REGION_PERMISSION_ATTRIBUTE(TYPE) (((TYPE) == MPU_REGION_NO_ACCESS) || \
|
||||
((TYPE) == MPU_REGION_PRIV_RW) || \
|
||||
((TYPE) == MPU_REGION_PRIV_RW_URO) || \
|
||||
((TYPE) == MPU_REGION_FULL_ACCESS) || \
|
||||
((TYPE) == MPU_REGION_PRIV_RO) || \
|
||||
((TYPE) == MPU_REGION_PRIV_RO_URO))
|
||||
|
||||
#define IS_MPU_REGION_NUMBER(NUMBER) (((NUMBER) == MPU_REGION_NUMBER0) || \
|
||||
((NUMBER) == MPU_REGION_NUMBER1) || \
|
||||
((NUMBER) == MPU_REGION_NUMBER2) || \
|
||||
((NUMBER) == MPU_REGION_NUMBER3) || \
|
||||
((NUMBER) == MPU_REGION_NUMBER4) || \
|
||||
((NUMBER) == MPU_REGION_NUMBER5) || \
|
||||
((NUMBER) == MPU_REGION_NUMBER6) || \
|
||||
((NUMBER) == MPU_REGION_NUMBER7))
|
||||
|
||||
#define IS_MPU_REGION_SIZE(SIZE) (((SIZE) == MPU_REGION_SIZE_32B) || \
|
||||
((SIZE) == MPU_REGION_SIZE_64B) || \
|
||||
((SIZE) == MPU_REGION_SIZE_128B) || \
|
||||
((SIZE) == MPU_REGION_SIZE_256B) || \
|
||||
((SIZE) == MPU_REGION_SIZE_512B) || \
|
||||
((SIZE) == MPU_REGION_SIZE_1KB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_2KB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_4KB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_8KB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_16KB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_32KB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_64KB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_128KB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_256KB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_512KB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_1MB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_2MB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_4MB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_8MB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_16MB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_32MB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_64MB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_128MB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_256MB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_512MB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_1GB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_2GB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_4GB))
|
||||
|
||||
#define IS_MPU_SUB_REGION_DISABLE(SUBREGION) ((SUBREGION) < (uint16_t)0x00FFU)
|
||||
#endif /* __MPU_PRESENT */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32F7xx_HAL_CORTEX_H */
|
||||
|
||||
|
||||
@@ -0,0 +1,218 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f7xx_hal_def.h
|
||||
* @author MCD Application Team
|
||||
* @brief This file contains HAL common defines, enumeration, macros and
|
||||
* structures definitions.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F7xx_HAL_DEF
|
||||
#define __STM32F7xx_HAL_DEF
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f7xx.h"
|
||||
#include "Legacy/stm32_hal_legacy.h"
|
||||
#include <stddef.h>
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
|
||||
/**
|
||||
* @brief HAL Status structures definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_OK = 0x00U,
|
||||
HAL_ERROR = 0x01U,
|
||||
HAL_BUSY = 0x02U,
|
||||
HAL_TIMEOUT = 0x03U
|
||||
} HAL_StatusTypeDef;
|
||||
|
||||
/**
|
||||
* @brief HAL Lock structures definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_UNLOCKED = 0x00U,
|
||||
HAL_LOCKED = 0x01U
|
||||
} HAL_LockTypeDef;
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
|
||||
#define UNUSED(X) (void)X /* To avoid gcc/g++ warnings */
|
||||
|
||||
#define HAL_MAX_DELAY 0xFFFFFFFFU
|
||||
|
||||
#define HAL_IS_BIT_SET(REG, BIT) (((REG) & (BIT)) == (BIT))
|
||||
#define HAL_IS_BIT_CLR(REG, BIT) (((REG) & (BIT)) == 0U)
|
||||
|
||||
#define __HAL_LINKDMA(__HANDLE__, __PPP_DMA_FIELD__, __DMA_HANDLE__) \
|
||||
do{ \
|
||||
(__HANDLE__)->__PPP_DMA_FIELD__ = &(__DMA_HANDLE__); \
|
||||
(__DMA_HANDLE__).Parent = (__HANDLE__); \
|
||||
} while(0)
|
||||
|
||||
/** @brief Reset the Handle's State field.
|
||||
* @param __HANDLE__ specifies the Peripheral Handle.
|
||||
* @note This macro can be used for the following purpose:
|
||||
* - When the Handle is declared as local variable; before passing it as parameter
|
||||
* to HAL_PPP_Init() for the first time, it is mandatory to use this macro
|
||||
* to set to 0 the Handle's "State" field.
|
||||
* Otherwise, "State" field may have any random value and the first time the function
|
||||
* HAL_PPP_Init() is called, the low level hardware initialization will be missed
|
||||
* (i.e. HAL_PPP_MspInit() will not be executed).
|
||||
* - When there is a need to reconfigure the low level hardware: instead of calling
|
||||
* HAL_PPP_DeInit() then HAL_PPP_Init(), user can make a call to this macro then HAL_PPP_Init().
|
||||
* In this later function, when the Handle's "State" field is set to 0, it will execute the function
|
||||
* HAL_PPP_MspInit() which will reconfigure the low level hardware.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = 0U)
|
||||
|
||||
#if (USE_RTOS == 1U)
|
||||
/* Reserved for future use */
|
||||
#error "USE_RTOS should be 0 in the current HAL release"
|
||||
#else
|
||||
#define __HAL_LOCK(__HANDLE__) \
|
||||
do{ \
|
||||
if((__HANDLE__)->Lock == HAL_LOCKED) \
|
||||
{ \
|
||||
return HAL_BUSY; \
|
||||
} \
|
||||
else \
|
||||
{ \
|
||||
(__HANDLE__)->Lock = HAL_LOCKED; \
|
||||
} \
|
||||
}while (0U)
|
||||
|
||||
#define __HAL_UNLOCK(__HANDLE__) \
|
||||
do{ \
|
||||
(__HANDLE__)->Lock = HAL_UNLOCKED; \
|
||||
}while (0U)
|
||||
#endif /* USE_RTOS */
|
||||
|
||||
#if defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) /* ARM Compiler V6 */
|
||||
#ifndef __weak
|
||||
#define __weak __attribute__((weak))
|
||||
#endif
|
||||
#ifndef __packed
|
||||
#define __packed __attribute__((packed))
|
||||
#endif
|
||||
#elif defined ( __GNUC__ ) && !defined (__CC_ARM) /* GNU Compiler */
|
||||
#ifndef __weak
|
||||
#define __weak __attribute__((weak))
|
||||
#endif /* __weak */
|
||||
#ifndef __packed
|
||||
#define __packed __attribute__((__packed__))
|
||||
#endif /* __packed */
|
||||
#endif /* __GNUC__ */
|
||||
|
||||
|
||||
/* Macro to get variable aligned on 4-bytes, for __ICCARM__ the directive "#pragma data_alignment=4" must be used instead */
|
||||
#if defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) /* ARM Compiler V6 */
|
||||
#ifndef __ALIGN_BEGIN
|
||||
#define __ALIGN_BEGIN
|
||||
#endif
|
||||
#ifndef __ALIGN_END
|
||||
#define __ALIGN_END __attribute__ ((aligned (4)))
|
||||
#endif
|
||||
#elif defined ( __GNUC__ ) && !defined (__CC_ARM) /* GNU Compiler */
|
||||
#ifndef __ALIGN_END
|
||||
#define __ALIGN_END __attribute__ ((aligned (4)))
|
||||
#endif /* __ALIGN_END */
|
||||
#ifndef __ALIGN_BEGIN
|
||||
#define __ALIGN_BEGIN
|
||||
#endif /* __ALIGN_BEGIN */
|
||||
#else
|
||||
#ifndef __ALIGN_END
|
||||
#define __ALIGN_END
|
||||
#endif /* __ALIGN_END */
|
||||
#ifndef __ALIGN_BEGIN
|
||||
#if defined (__CC_ARM) /* ARM Compiler V5*/
|
||||
#define __ALIGN_BEGIN __align(4)
|
||||
#elif defined (__ICCARM__) /* IAR Compiler */
|
||||
#define __ALIGN_BEGIN
|
||||
#endif /* __CC_ARM */
|
||||
#endif /* __ALIGN_BEGIN */
|
||||
#endif /* __GNUC__ */
|
||||
|
||||
/* Macro to get variable aligned on 32-bytes,needed for cache maintenance purpose */
|
||||
#if defined (__GNUC__) /* GNU Compiler */
|
||||
#define ALIGN_32BYTES(buf) buf __attribute__ ((aligned (32)))
|
||||
#elif defined (__ICCARM__) /* IAR Compiler */
|
||||
#define ALIGN_32BYTES(buf) _Pragma("data_alignment=32") buf
|
||||
#elif defined (__CC_ARM) /* ARM Compiler */
|
||||
#define ALIGN_32BYTES(buf) __align(32) buf
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief __RAM_FUNC definition
|
||||
*/
|
||||
#if defined ( __CC_ARM ) || (defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050))
|
||||
/* ARM Compiler V4/V5 and V6
|
||||
--------------------------
|
||||
RAM functions are defined using the toolchain options.
|
||||
Functions that are executed in RAM should reside in a separate source module.
|
||||
Using the 'Options for File' dialog you can simply change the 'Code / Const'
|
||||
area of a module to a memory space in physical RAM.
|
||||
Available memory areas are declared in the 'Target' tab of the 'Options for Target'
|
||||
dialog.
|
||||
*/
|
||||
#define __RAM_FUNC
|
||||
|
||||
#elif defined ( __ICCARM__ )
|
||||
/* ICCARM Compiler
|
||||
---------------
|
||||
RAM functions are defined using a specific toolchain keyword "__ramfunc".
|
||||
*/
|
||||
#define __RAM_FUNC __ramfunc
|
||||
|
||||
#elif defined ( __GNUC__ )
|
||||
/* GNU Compiler
|
||||
------------
|
||||
RAM functions are defined using a specific toolchain attribute
|
||||
"__attribute__((section(".RamFunc")))".
|
||||
*/
|
||||
#define __RAM_FUNC __attribute__((section(".RamFunc")))
|
||||
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief __NOINLINE definition
|
||||
*/
|
||||
#if defined ( __CC_ARM ) || (defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)) || defined ( __GNUC__ )
|
||||
/* ARM V4/V5 and V6 & GNU Compiler
|
||||
-------------------------------
|
||||
*/
|
||||
#define __NOINLINE __attribute__ ( (noinline) )
|
||||
|
||||
#elif defined ( __ICCARM__ )
|
||||
/* ICCARM Compiler
|
||||
---------------
|
||||
*/
|
||||
#define __NOINLINE _Pragma("optimize = no_inline")
|
||||
|
||||
#endif
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* ___STM32F7xx_HAL_DEF */
|
||||
|
||||
|
||||
@@ -0,0 +1,747 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f7xx_hal_dma.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of DMA HAL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file in
|
||||
* the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F7xx_HAL_DMA_H
|
||||
#define __STM32F7xx_HAL_DMA_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f7xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F7xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup DMA
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
|
||||
/** @defgroup DMA_Exported_Types DMA Exported Types
|
||||
* @brief DMA Exported Types
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief DMA Configuration Structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t Channel; /*!< Specifies the channel used for the specified stream.
|
||||
This parameter can be a value of @ref DMAEx_Channel_selection */
|
||||
|
||||
uint32_t Direction; /*!< Specifies if the data will be transferred from memory to peripheral,
|
||||
from memory to memory or from peripheral to memory.
|
||||
This parameter can be a value of @ref DMA_Data_transfer_direction */
|
||||
|
||||
uint32_t PeriphInc; /*!< Specifies whether the Peripheral address register should be incremented or not.
|
||||
This parameter can be a value of @ref DMA_Peripheral_incremented_mode */
|
||||
|
||||
uint32_t MemInc; /*!< Specifies whether the memory address register should be incremented or not.
|
||||
This parameter can be a value of @ref DMA_Memory_incremented_mode */
|
||||
|
||||
uint32_t PeriphDataAlignment; /*!< Specifies the Peripheral data width.
|
||||
This parameter can be a value of @ref DMA_Peripheral_data_size */
|
||||
|
||||
uint32_t MemDataAlignment; /*!< Specifies the Memory data width.
|
||||
This parameter can be a value of @ref DMA_Memory_data_size */
|
||||
|
||||
uint32_t Mode; /*!< Specifies the operation mode of the DMAy Streamx.
|
||||
This parameter can be a value of @ref DMA_mode
|
||||
@note The circular buffer mode cannot be used if the memory-to-memory
|
||||
data transfer is configured on the selected Stream */
|
||||
|
||||
uint32_t Priority; /*!< Specifies the software priority for the DMAy Streamx.
|
||||
This parameter can be a value of @ref DMA_Priority_level */
|
||||
|
||||
uint32_t FIFOMode; /*!< Specifies if the FIFO mode or Direct mode will be used for the specified stream.
|
||||
This parameter can be a value of @ref DMA_FIFO_direct_mode
|
||||
@note The Direct mode (FIFO mode disabled) cannot be used if the
|
||||
memory-to-memory data transfer is configured on the selected stream */
|
||||
|
||||
uint32_t FIFOThreshold; /*!< Specifies the FIFO threshold level.
|
||||
This parameter can be a value of @ref DMA_FIFO_threshold_level */
|
||||
|
||||
uint32_t MemBurst; /*!< Specifies the Burst transfer configuration for the memory transfers.
|
||||
It specifies the amount of data to be transferred in a single non interruptible
|
||||
transaction.
|
||||
This parameter can be a value of @ref DMA_Memory_burst
|
||||
@note The burst mode is possible only if the address Increment mode is enabled. */
|
||||
|
||||
uint32_t PeriphBurst; /*!< Specifies the Burst transfer configuration for the peripheral transfers.
|
||||
It specifies the amount of data to be transferred in a single non interruptible
|
||||
transaction.
|
||||
This parameter can be a value of @ref DMA_Peripheral_burst
|
||||
@note The burst mode is possible only if the address Increment mode is enabled. */
|
||||
}DMA_InitTypeDef;
|
||||
|
||||
/**
|
||||
* @brief HAL DMA State structures definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_DMA_STATE_RESET = 0x00U, /*!< DMA not yet initialized or disabled */
|
||||
HAL_DMA_STATE_READY = 0x01U, /*!< DMA initialized and ready for use */
|
||||
HAL_DMA_STATE_BUSY = 0x02U, /*!< DMA process is ongoing */
|
||||
HAL_DMA_STATE_TIMEOUT = 0x03U, /*!< DMA timeout state */
|
||||
HAL_DMA_STATE_ERROR = 0x04U, /*!< DMA error state */
|
||||
HAL_DMA_STATE_ABORT = 0x05U, /*!< DMA Abort state */
|
||||
}HAL_DMA_StateTypeDef;
|
||||
|
||||
/**
|
||||
* @brief HAL DMA Error Code structure definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_DMA_FULL_TRANSFER = 0x00U, /*!< Full transfer */
|
||||
HAL_DMA_HALF_TRANSFER = 0x01U, /*!< Half Transfer */
|
||||
}HAL_DMA_LevelCompleteTypeDef;
|
||||
|
||||
/**
|
||||
* @brief HAL DMA Error Code structure definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_DMA_XFER_CPLT_CB_ID = 0x00U, /*!< Full transfer */
|
||||
HAL_DMA_XFER_HALFCPLT_CB_ID = 0x01U, /*!< Half Transfer */
|
||||
HAL_DMA_XFER_M1CPLT_CB_ID = 0x02U, /*!< M1 Full Transfer */
|
||||
HAL_DMA_XFER_M1HALFCPLT_CB_ID = 0x03U, /*!< M1 Half Transfer */
|
||||
HAL_DMA_XFER_ERROR_CB_ID = 0x04U, /*!< Error */
|
||||
HAL_DMA_XFER_ABORT_CB_ID = 0x05U, /*!< Abort */
|
||||
HAL_DMA_XFER_ALL_CB_ID = 0x06U /*!< All */
|
||||
}HAL_DMA_CallbackIDTypeDef;
|
||||
|
||||
/**
|
||||
* @brief DMA handle Structure definition
|
||||
*/
|
||||
typedef struct __DMA_HandleTypeDef
|
||||
{
|
||||
DMA_Stream_TypeDef *Instance; /*!< Register base address */
|
||||
|
||||
DMA_InitTypeDef Init; /*!< DMA communication parameters */
|
||||
|
||||
HAL_LockTypeDef Lock; /*!< DMA locking object */
|
||||
|
||||
__IO HAL_DMA_StateTypeDef State; /*!< DMA transfer state */
|
||||
|
||||
void *Parent; /*!< Parent object state */
|
||||
|
||||
void (* XferCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer complete callback */
|
||||
|
||||
void (* XferHalfCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA Half transfer complete callback */
|
||||
|
||||
void (* XferM1CpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer complete Memory1 callback */
|
||||
|
||||
void (* XferM1HalfCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer Half complete Memory1 callback */
|
||||
|
||||
void (* XferErrorCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer error callback */
|
||||
|
||||
void (* XferAbortCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer Abort callback */
|
||||
|
||||
__IO uint32_t ErrorCode; /*!< DMA Error code */
|
||||
|
||||
uint32_t StreamBaseAddress; /*!< DMA Stream Base Address */
|
||||
|
||||
uint32_t StreamIndex; /*!< DMA Stream Index */
|
||||
|
||||
}DMA_HandleTypeDef;
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
|
||||
/** @defgroup DMA_Exported_Constants DMA Exported Constants
|
||||
* @brief DMA Exported constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup DMA_Error_Code DMA Error Code
|
||||
* @brief DMA Error Code
|
||||
* @{
|
||||
*/
|
||||
#define HAL_DMA_ERROR_NONE 0x00000000U /*!< No error */
|
||||
#define HAL_DMA_ERROR_TE 0x00000001U /*!< Transfer error */
|
||||
#define HAL_DMA_ERROR_FE 0x00000002U /*!< FIFO error */
|
||||
#define HAL_DMA_ERROR_DME 0x00000004U /*!< Direct Mode error */
|
||||
#define HAL_DMA_ERROR_TIMEOUT 0x00000020U /*!< Timeout error */
|
||||
#define HAL_DMA_ERROR_PARAM 0x00000040U /*!< Parameter error */
|
||||
#define HAL_DMA_ERROR_NO_XFER 0x00000080U /*!< Abort requested with no Xfer ongoing */
|
||||
#define HAL_DMA_ERROR_NOT_SUPPORTED 0x00000100U /*!< Not supported mode */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DMA_Data_transfer_direction DMA Data transfer direction
|
||||
* @brief DMA data transfer direction
|
||||
* @{
|
||||
*/
|
||||
#define DMA_PERIPH_TO_MEMORY 0x00000000U /*!< Peripheral to memory direction */
|
||||
#define DMA_MEMORY_TO_PERIPH DMA_SxCR_DIR_0 /*!< Memory to peripheral direction */
|
||||
#define DMA_MEMORY_TO_MEMORY DMA_SxCR_DIR_1 /*!< Memory to memory direction */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DMA_Peripheral_incremented_mode DMA Peripheral incremented mode
|
||||
* @brief DMA peripheral incremented mode
|
||||
* @{
|
||||
*/
|
||||
#define DMA_PINC_ENABLE DMA_SxCR_PINC /*!< Peripheral increment mode enable */
|
||||
#define DMA_PINC_DISABLE 0x00000000U /*!< Peripheral increment mode disable */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DMA_Memory_incremented_mode DMA Memory incremented mode
|
||||
* @brief DMA memory incremented mode
|
||||
* @{
|
||||
*/
|
||||
#define DMA_MINC_ENABLE DMA_SxCR_MINC /*!< Memory increment mode enable */
|
||||
#define DMA_MINC_DISABLE 0x00000000U /*!< Memory increment mode disable */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DMA_Peripheral_data_size DMA Peripheral data size
|
||||
* @brief DMA peripheral data size
|
||||
* @{
|
||||
*/
|
||||
#define DMA_PDATAALIGN_BYTE 0x00000000U /*!< Peripheral data alignment: Byte */
|
||||
#define DMA_PDATAALIGN_HALFWORD DMA_SxCR_PSIZE_0 /*!< Peripheral data alignment: HalfWord */
|
||||
#define DMA_PDATAALIGN_WORD DMA_SxCR_PSIZE_1 /*!< Peripheral data alignment: Word */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DMA_Memory_data_size DMA Memory data size
|
||||
* @brief DMA memory data size
|
||||
* @{
|
||||
*/
|
||||
#define DMA_MDATAALIGN_BYTE 0x00000000U /*!< Memory data alignment: Byte */
|
||||
#define DMA_MDATAALIGN_HALFWORD DMA_SxCR_MSIZE_0 /*!< Memory data alignment: HalfWord */
|
||||
#define DMA_MDATAALIGN_WORD DMA_SxCR_MSIZE_1 /*!< Memory data alignment: Word */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DMA_mode DMA mode
|
||||
* @brief DMA mode
|
||||
* @{
|
||||
*/
|
||||
#define DMA_NORMAL 0x00000000U /*!< Normal mode */
|
||||
#define DMA_CIRCULAR DMA_SxCR_CIRC /*!< Circular mode */
|
||||
#define DMA_PFCTRL DMA_SxCR_PFCTRL /*!< Peripheral flow control mode */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DMA_Priority_level DMA Priority level
|
||||
* @brief DMA priority levels
|
||||
* @{
|
||||
*/
|
||||
#define DMA_PRIORITY_LOW 0x00000000U /*!< Priority level: Low */
|
||||
#define DMA_PRIORITY_MEDIUM DMA_SxCR_PL_0 /*!< Priority level: Medium */
|
||||
#define DMA_PRIORITY_HIGH DMA_SxCR_PL_1 /*!< Priority level: High */
|
||||
#define DMA_PRIORITY_VERY_HIGH DMA_SxCR_PL /*!< Priority level: Very High */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DMA_FIFO_direct_mode DMA FIFO direct mode
|
||||
* @brief DMA FIFO direct mode
|
||||
* @{
|
||||
*/
|
||||
#define DMA_FIFOMODE_DISABLE 0x00000000U /*!< FIFO mode disable */
|
||||
#define DMA_FIFOMODE_ENABLE DMA_SxFCR_DMDIS /*!< FIFO mode enable */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DMA_FIFO_threshold_level DMA FIFO threshold level
|
||||
* @brief DMA FIFO level
|
||||
* @{
|
||||
*/
|
||||
#define DMA_FIFO_THRESHOLD_1QUARTERFULL 0x00000000U /*!< FIFO threshold 1 quart full configuration */
|
||||
#define DMA_FIFO_THRESHOLD_HALFFULL DMA_SxFCR_FTH_0 /*!< FIFO threshold half full configuration */
|
||||
#define DMA_FIFO_THRESHOLD_3QUARTERSFULL DMA_SxFCR_FTH_1 /*!< FIFO threshold 3 quarts full configuration */
|
||||
#define DMA_FIFO_THRESHOLD_FULL DMA_SxFCR_FTH /*!< FIFO threshold full configuration */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DMA_Memory_burst DMA Memory burst
|
||||
* @brief DMA memory burst
|
||||
* @{
|
||||
*/
|
||||
#define DMA_MBURST_SINGLE 0x00000000U
|
||||
#define DMA_MBURST_INC4 DMA_SxCR_MBURST_0
|
||||
#define DMA_MBURST_INC8 DMA_SxCR_MBURST_1
|
||||
#define DMA_MBURST_INC16 DMA_SxCR_MBURST
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DMA_Peripheral_burst DMA Peripheral burst
|
||||
* @brief DMA peripheral burst
|
||||
* @{
|
||||
*/
|
||||
#define DMA_PBURST_SINGLE 0x00000000U
|
||||
#define DMA_PBURST_INC4 DMA_SxCR_PBURST_0
|
||||
#define DMA_PBURST_INC8 DMA_SxCR_PBURST_1
|
||||
#define DMA_PBURST_INC16 DMA_SxCR_PBURST
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DMA_interrupt_enable_definitions DMA interrupt enable definitions
|
||||
* @brief DMA interrupts definition
|
||||
* @{
|
||||
*/
|
||||
#define DMA_IT_TC DMA_SxCR_TCIE
|
||||
#define DMA_IT_HT DMA_SxCR_HTIE
|
||||
#define DMA_IT_TE DMA_SxCR_TEIE
|
||||
#define DMA_IT_DME DMA_SxCR_DMEIE
|
||||
#define DMA_IT_FE 0x00000080U
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DMA_flag_definitions DMA flag definitions
|
||||
* @brief DMA flag definitions
|
||||
* @{
|
||||
*/
|
||||
#define DMA_FLAG_FEIF0_4 0x00000001U
|
||||
#define DMA_FLAG_DMEIF0_4 0x00000004U
|
||||
#define DMA_FLAG_TEIF0_4 0x00000008U
|
||||
#define DMA_FLAG_HTIF0_4 0x00000010U
|
||||
#define DMA_FLAG_TCIF0_4 0x00000020U
|
||||
#define DMA_FLAG_FEIF1_5 0x00000040U
|
||||
#define DMA_FLAG_DMEIF1_5 0x00000100U
|
||||
#define DMA_FLAG_TEIF1_5 0x00000200U
|
||||
#define DMA_FLAG_HTIF1_5 0x00000400U
|
||||
#define DMA_FLAG_TCIF1_5 0x00000800U
|
||||
#define DMA_FLAG_FEIF2_6 0x00010000U
|
||||
#define DMA_FLAG_DMEIF2_6 0x00040000U
|
||||
#define DMA_FLAG_TEIF2_6 0x00080000U
|
||||
#define DMA_FLAG_HTIF2_6 0x00100000U
|
||||
#define DMA_FLAG_TCIF2_6 0x00200000U
|
||||
#define DMA_FLAG_FEIF3_7 0x00400000U
|
||||
#define DMA_FLAG_DMEIF3_7 0x01000000U
|
||||
#define DMA_FLAG_TEIF3_7 0x02000000U
|
||||
#define DMA_FLAG_HTIF3_7 0x04000000U
|
||||
#define DMA_FLAG_TCIF3_7 0x08000000U
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
|
||||
/** @brief Reset DMA handle state
|
||||
* @param __HANDLE__ specifies the DMA handle.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_DMA_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DMA_STATE_RESET)
|
||||
|
||||
/**
|
||||
* @brief Return the current DMA Stream FIFO filled level.
|
||||
* @param __HANDLE__ DMA handle
|
||||
* @retval The FIFO filling state.
|
||||
* - DMA_FIFOStatus_Less1QuarterFull: when FIFO is less than 1 quarter-full
|
||||
* and not empty.
|
||||
* - DMA_FIFOStatus_1QuarterFull: if more than 1 quarter-full.
|
||||
* - DMA_FIFOStatus_HalfFull: if more than 1 half-full.
|
||||
* - DMA_FIFOStatus_3QuartersFull: if more than 3 quarters-full.
|
||||
* - DMA_FIFOStatus_Empty: when FIFO is empty
|
||||
* - DMA_FIFOStatus_Full: when FIFO is full
|
||||
*/
|
||||
#define __HAL_DMA_GET_FS(__HANDLE__) (((__HANDLE__)->Instance->FCR & (DMA_SxFCR_FS)))
|
||||
|
||||
/**
|
||||
* @brief Enable the specified DMA Stream.
|
||||
* @param __HANDLE__ DMA handle
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_DMA_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= DMA_SxCR_EN)
|
||||
|
||||
/**
|
||||
* @brief Disable the specified DMA Stream.
|
||||
* @param __HANDLE__ DMA handle
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_DMA_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~DMA_SxCR_EN)
|
||||
|
||||
/* Interrupt & Flag management */
|
||||
|
||||
/**
|
||||
* @brief Return the current DMA Stream transfer complete flag.
|
||||
* @param __HANDLE__ DMA handle
|
||||
* @retval The specified transfer complete flag index.
|
||||
*/
|
||||
#define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \
|
||||
(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_TCIF0_4 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_TCIF0_4 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_TCIF0_4 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_TCIF0_4 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_TCIF1_5 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_TCIF1_5 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_TCIF1_5 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_TCIF1_5 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_TCIF2_6 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_TCIF2_6 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_TCIF2_6 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_TCIF2_6 :\
|
||||
DMA_FLAG_TCIF3_7)
|
||||
|
||||
/**
|
||||
* @brief Return the current DMA Stream half transfer complete flag.
|
||||
* @param __HANDLE__ DMA handle
|
||||
* @retval The specified half transfer complete flag index.
|
||||
*/
|
||||
#define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__)\
|
||||
(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_HTIF0_4 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_HTIF0_4 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_HTIF0_4 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_HTIF0_4 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_HTIF1_5 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_HTIF1_5 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_HTIF1_5 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_HTIF1_5 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_HTIF2_6 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_HTIF2_6 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_HTIF2_6 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_HTIF2_6 :\
|
||||
DMA_FLAG_HTIF3_7)
|
||||
|
||||
/**
|
||||
* @brief Return the current DMA Stream transfer error flag.
|
||||
* @param __HANDLE__ DMA handle
|
||||
* @retval The specified transfer error flag index.
|
||||
*/
|
||||
#define __HAL_DMA_GET_TE_FLAG_INDEX(__HANDLE__)\
|
||||
(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_TEIF0_4 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_TEIF0_4 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_TEIF0_4 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_TEIF0_4 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_TEIF1_5 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_TEIF1_5 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_TEIF1_5 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_TEIF1_5 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_TEIF2_6 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_TEIF2_6 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_TEIF2_6 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_TEIF2_6 :\
|
||||
DMA_FLAG_TEIF3_7)
|
||||
|
||||
/**
|
||||
* @brief Return the current DMA Stream FIFO error flag.
|
||||
* @param __HANDLE__ DMA handle
|
||||
* @retval The specified FIFO error flag index.
|
||||
*/
|
||||
#define __HAL_DMA_GET_FE_FLAG_INDEX(__HANDLE__)\
|
||||
(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_FEIF0_4 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_FEIF0_4 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_FEIF0_4 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_FEIF0_4 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_FEIF1_5 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_FEIF1_5 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_FEIF1_5 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_FEIF1_5 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_FEIF2_6 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_FEIF2_6 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_FEIF2_6 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_FEIF2_6 :\
|
||||
DMA_FLAG_FEIF3_7)
|
||||
|
||||
/**
|
||||
* @brief Return the current DMA Stream direct mode error flag.
|
||||
* @param __HANDLE__ DMA handle
|
||||
* @retval The specified direct mode error flag index.
|
||||
*/
|
||||
#define __HAL_DMA_GET_DME_FLAG_INDEX(__HANDLE__)\
|
||||
(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_DMEIF0_4 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_DMEIF0_4 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_DMEIF0_4 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_DMEIF0_4 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_DMEIF1_5 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_DMEIF1_5 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_DMEIF1_5 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_DMEIF1_5 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_DMEIF2_6 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_DMEIF2_6 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_DMEIF2_6 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_DMEIF2_6 :\
|
||||
DMA_FLAG_DMEIF3_7)
|
||||
|
||||
/**
|
||||
* @brief Get the DMA Stream pending flags.
|
||||
* @param __HANDLE__ DMA handle
|
||||
* @param __FLAG__ Get the specified flag.
|
||||
* This parameter can be any combination of the following values:
|
||||
* @arg DMA_FLAG_TCIFx: Transfer complete flag.
|
||||
* @arg DMA_FLAG_HTIFx: Half transfer complete flag.
|
||||
* @arg DMA_FLAG_TEIFx: Transfer error flag.
|
||||
* @arg DMA_FLAG_DMEIFx: Direct mode error flag.
|
||||
* @arg DMA_FLAG_FEIFx: FIFO error flag.
|
||||
* Where x can be 0_4, 1_5, 2_6 or 3_7 to select the DMA Stream flag.
|
||||
* @retval The state of FLAG (SET or RESET).
|
||||
*/
|
||||
#define __HAL_DMA_GET_FLAG(__HANDLE__, __FLAG__)\
|
||||
(((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA2_Stream3)? (DMA2->HISR & (__FLAG__)) :\
|
||||
((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream7)? (DMA2->LISR & (__FLAG__)) :\
|
||||
((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream3)? (DMA1->HISR & (__FLAG__)) : (DMA1->LISR & (__FLAG__)))
|
||||
|
||||
/**
|
||||
* @brief Clear the DMA Stream pending flags.
|
||||
* @param __HANDLE__ DMA handle
|
||||
* @param __FLAG__ specifies the flag to clear.
|
||||
* This parameter can be any combination of the following values:
|
||||
* @arg DMA_FLAG_TCIFx: Transfer complete flag.
|
||||
* @arg DMA_FLAG_HTIFx: Half transfer complete flag.
|
||||
* @arg DMA_FLAG_TEIFx: Transfer error flag.
|
||||
* @arg DMA_FLAG_DMEIFx: Direct mode error flag.
|
||||
* @arg DMA_FLAG_FEIFx: FIFO error flag.
|
||||
* Where x can be 0_4, 1_5, 2_6 or 3_7 to select the DMA Stream flag.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) \
|
||||
(((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA2_Stream3)? (DMA2->HIFCR = (__FLAG__)) :\
|
||||
((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream7)? (DMA2->LIFCR = (__FLAG__)) :\
|
||||
((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream3)? (DMA1->HIFCR = (__FLAG__)) : (DMA1->LIFCR = (__FLAG__)))
|
||||
|
||||
/**
|
||||
* @brief Enable the specified DMA Stream interrupts.
|
||||
* @param __HANDLE__ DMA handle
|
||||
* @param __INTERRUPT__ specifies the DMA interrupt sources to be enabled or disabled.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg DMA_IT_TC: Transfer complete interrupt mask.
|
||||
* @arg DMA_IT_HT: Half transfer complete interrupt mask.
|
||||
* @arg DMA_IT_TE: Transfer error interrupt mask.
|
||||
* @arg DMA_IT_FE: FIFO error interrupt mask.
|
||||
* @arg DMA_IT_DME: Direct mode error interrupt.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_DMA_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__INTERRUPT__) != DMA_IT_FE)? \
|
||||
((__HANDLE__)->Instance->CR |= (__INTERRUPT__)) : ((__HANDLE__)->Instance->FCR |= (__INTERRUPT__)))
|
||||
|
||||
/**
|
||||
* @brief Disable the specified DMA Stream interrupts.
|
||||
* @param __HANDLE__ DMA handle
|
||||
* @param __INTERRUPT__ specifies the DMA interrupt sources to be enabled or disabled.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg DMA_IT_TC: Transfer complete interrupt mask.
|
||||
* @arg DMA_IT_HT: Half transfer complete interrupt mask.
|
||||
* @arg DMA_IT_TE: Transfer error interrupt mask.
|
||||
* @arg DMA_IT_FE: FIFO error interrupt mask.
|
||||
* @arg DMA_IT_DME: Direct mode error interrupt.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_DMA_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__INTERRUPT__) != DMA_IT_FE)? \
|
||||
((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__)) : ((__HANDLE__)->Instance->FCR &= ~(__INTERRUPT__)))
|
||||
|
||||
/**
|
||||
* @brief Check whether the specified DMA Stream interrupt is enabled or not.
|
||||
* @param __HANDLE__ DMA handle
|
||||
* @param __INTERRUPT__ specifies the DMA interrupt source to check.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg DMA_IT_TC: Transfer complete interrupt mask.
|
||||
* @arg DMA_IT_HT: Half transfer complete interrupt mask.
|
||||
* @arg DMA_IT_TE: Transfer error interrupt mask.
|
||||
* @arg DMA_IT_FE: FIFO error interrupt mask.
|
||||
* @arg DMA_IT_DME: Direct mode error interrupt.
|
||||
* @retval The state of DMA_IT.
|
||||
*/
|
||||
#define __HAL_DMA_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__INTERRUPT__) != DMA_IT_FE)? \
|
||||
((__HANDLE__)->Instance->CR & (__INTERRUPT__)) : \
|
||||
((__HANDLE__)->Instance->FCR & (__INTERRUPT__)))
|
||||
|
||||
/**
|
||||
* @brief Writes the number of data units to be transferred on the DMA Stream.
|
||||
* @param __HANDLE__ DMA handle
|
||||
* @param __COUNTER__ Number of data units to be transferred (from 0 to 65535)
|
||||
* Number of data items depends only on the Peripheral data format.
|
||||
*
|
||||
* @note If Peripheral data format is Bytes: number of data units is equal
|
||||
* to total number of bytes to be transferred.
|
||||
*
|
||||
* @note If Peripheral data format is Half-Word: number of data units is
|
||||
* equal to total number of bytes to be transferred / 2.
|
||||
*
|
||||
* @note If Peripheral data format is Word: number of data units is equal
|
||||
* to total number of bytes to be transferred / 4.
|
||||
*
|
||||
* @retval The number of remaining data units in the current DMAy Streamx transfer.
|
||||
*/
|
||||
#define __HAL_DMA_SET_COUNTER(__HANDLE__, __COUNTER__) ((__HANDLE__)->Instance->NDTR = (uint16_t)(__COUNTER__))
|
||||
|
||||
/**
|
||||
* @brief Returns the number of remaining data units in the current DMAy Streamx transfer.
|
||||
* @param __HANDLE__ DMA handle
|
||||
*
|
||||
* @retval The number of remaining data units in the current DMA Stream transfer.
|
||||
*/
|
||||
#define __HAL_DMA_GET_COUNTER(__HANDLE__) ((__HANDLE__)->Instance->NDTR)
|
||||
|
||||
|
||||
/* Include DMA HAL Extension module */
|
||||
#include "stm32f7xx_hal_dma_ex.h"
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
|
||||
/** @defgroup DMA_Exported_Functions DMA Exported Functions
|
||||
* @brief DMA Exported functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup DMA_Exported_Functions_Group1 Initialization and de-initialization functions
|
||||
* @brief Initialization and de-initialization functions
|
||||
* @{
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma);
|
||||
HAL_StatusTypeDef HAL_DMA_DeInit(DMA_HandleTypeDef *hdma);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DMA_Exported_Functions_Group2 I/O operation functions
|
||||
* @brief I/O operation functions
|
||||
* @{
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_DMA_Start (DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength);
|
||||
HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength);
|
||||
HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma);
|
||||
HAL_StatusTypeDef HAL_DMA_Abort_IT(DMA_HandleTypeDef *hdma);
|
||||
HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, HAL_DMA_LevelCompleteTypeDef CompleteLevel, uint32_t Timeout);
|
||||
void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma);
|
||||
HAL_StatusTypeDef HAL_DMA_RegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID, void (* pCallback)(DMA_HandleTypeDef *_hdma));
|
||||
HAL_StatusTypeDef HAL_DMA_UnRegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DMA_Exported_Functions_Group3 Peripheral State functions
|
||||
* @brief Peripheral State functions
|
||||
* @{
|
||||
*/
|
||||
HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma);
|
||||
uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Private Constants -------------------------------------------------------------*/
|
||||
/** @defgroup DMA_Private_Constants DMA Private Constants
|
||||
* @brief DMA private defines and constants
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup DMA_Private_Macros DMA Private Macros
|
||||
* @brief DMA private macros
|
||||
* @{
|
||||
*/
|
||||
#define IS_DMA_DIRECTION(DIRECTION) (((DIRECTION) == DMA_PERIPH_TO_MEMORY ) || \
|
||||
((DIRECTION) == DMA_MEMORY_TO_PERIPH) || \
|
||||
((DIRECTION) == DMA_MEMORY_TO_MEMORY))
|
||||
|
||||
#define IS_DMA_BUFFER_SIZE(SIZE) (((SIZE) >= 0x01U) && ((SIZE) < 0x10000U))
|
||||
|
||||
#define IS_DMA_PERIPHERAL_INC_STATE(STATE) (((STATE) == DMA_PINC_ENABLE) || \
|
||||
((STATE) == DMA_PINC_DISABLE))
|
||||
|
||||
#define IS_DMA_MEMORY_INC_STATE(STATE) (((STATE) == DMA_MINC_ENABLE) || \
|
||||
((STATE) == DMA_MINC_DISABLE))
|
||||
|
||||
#define IS_DMA_PERIPHERAL_DATA_SIZE(SIZE) (((SIZE) == DMA_PDATAALIGN_BYTE) || \
|
||||
((SIZE) == DMA_PDATAALIGN_HALFWORD) || \
|
||||
((SIZE) == DMA_PDATAALIGN_WORD))
|
||||
|
||||
#define IS_DMA_MEMORY_DATA_SIZE(SIZE) (((SIZE) == DMA_MDATAALIGN_BYTE) || \
|
||||
((SIZE) == DMA_MDATAALIGN_HALFWORD) || \
|
||||
((SIZE) == DMA_MDATAALIGN_WORD ))
|
||||
|
||||
#define IS_DMA_MODE(MODE) (((MODE) == DMA_NORMAL ) || \
|
||||
((MODE) == DMA_CIRCULAR) || \
|
||||
((MODE) == DMA_PFCTRL))
|
||||
|
||||
#define IS_DMA_PRIORITY(PRIORITY) (((PRIORITY) == DMA_PRIORITY_LOW ) || \
|
||||
((PRIORITY) == DMA_PRIORITY_MEDIUM) || \
|
||||
((PRIORITY) == DMA_PRIORITY_HIGH) || \
|
||||
((PRIORITY) == DMA_PRIORITY_VERY_HIGH))
|
||||
|
||||
#define IS_DMA_FIFO_MODE_STATE(STATE) (((STATE) == DMA_FIFOMODE_DISABLE ) || \
|
||||
((STATE) == DMA_FIFOMODE_ENABLE))
|
||||
|
||||
#define IS_DMA_FIFO_THRESHOLD(THRESHOLD) (((THRESHOLD) == DMA_FIFO_THRESHOLD_1QUARTERFULL ) || \
|
||||
((THRESHOLD) == DMA_FIFO_THRESHOLD_HALFFULL) || \
|
||||
((THRESHOLD) == DMA_FIFO_THRESHOLD_3QUARTERSFULL) || \
|
||||
((THRESHOLD) == DMA_FIFO_THRESHOLD_FULL))
|
||||
|
||||
#define IS_DMA_MEMORY_BURST(BURST) (((BURST) == DMA_MBURST_SINGLE) || \
|
||||
((BURST) == DMA_MBURST_INC4) || \
|
||||
((BURST) == DMA_MBURST_INC8) || \
|
||||
((BURST) == DMA_MBURST_INC16))
|
||||
|
||||
#define IS_DMA_PERIPHERAL_BURST(BURST) (((BURST) == DMA_PBURST_SINGLE) || \
|
||||
((BURST) == DMA_PBURST_INC4) || \
|
||||
((BURST) == DMA_PBURST_INC8) || \
|
||||
((BURST) == DMA_PBURST_INC16))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
/** @defgroup DMA_Private_Functions DMA Private Functions
|
||||
* @brief DMA private functions
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32F7xx_HAL_DMA_H */
|
||||
|
||||
@@ -0,0 +1,183 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f7xx_hal_dma_ex.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of DMA HAL extension module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file in
|
||||
* the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F7xx_HAL_DMA_EX_H
|
||||
#define __STM32F7xx_HAL_DMA_EX_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f7xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F7xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup DMAEx
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/** @defgroup DMAEx_Exported_Types DMAEx Exported Types
|
||||
* @brief DMAEx Exported types
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief HAL DMA Memory definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
MEMORY0 = 0x00U, /*!< Memory 0 */
|
||||
MEMORY1 = 0x01U, /*!< Memory 1 */
|
||||
|
||||
}HAL_DMA_MemoryTypeDef;
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
|
||||
/** @defgroup DMA_Exported_Constants DMA Exported Constants
|
||||
* @brief DMA Exported constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup DMAEx_Channel_selection DMA Channel selection
|
||||
* @brief DMAEx channel selection
|
||||
* @{
|
||||
*/
|
||||
#define DMA_CHANNEL_0 0x00000000U /*!< DMA Channel 0 */
|
||||
#define DMA_CHANNEL_1 0x02000000U /*!< DMA Channel 1 */
|
||||
#define DMA_CHANNEL_2 0x04000000U /*!< DMA Channel 2 */
|
||||
#define DMA_CHANNEL_3 0x06000000U /*!< DMA Channel 3 */
|
||||
#define DMA_CHANNEL_4 0x08000000U /*!< DMA Channel 4 */
|
||||
#define DMA_CHANNEL_5 0x0A000000U /*!< DMA Channel 5 */
|
||||
#define DMA_CHANNEL_6 0x0C000000U /*!< DMA Channel 6 */
|
||||
#define DMA_CHANNEL_7 0x0E000000U /*!< DMA Channel 7 */
|
||||
#if defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx) ||\
|
||||
defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) ||\
|
||||
defined (STM32F779xx) || defined (STM32F730xx)
|
||||
#define DMA_CHANNEL_8 0x10000000U /*!< DMA Channel 8 */
|
||||
#define DMA_CHANNEL_9 0x12000000U /*!< DMA Channel 9 */
|
||||
#define DMA_CHANNEL_10 0x14000000U /*!< DMA Channel 10*/
|
||||
#define DMA_CHANNEL_11 0x16000000U /*!< DMA Channel 11*/
|
||||
#define DMA_CHANNEL_12 0x18000000U /*!< DMA Channel 12*/
|
||||
#define DMA_CHANNEL_13 0x1A000000U /*!< DMA Channel 13*/
|
||||
#define DMA_CHANNEL_14 0x1C000000U /*!< DMA Channel 14*/
|
||||
#define DMA_CHANNEL_15 0x1E000000U /*!< DMA Channel 15*/
|
||||
#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx || STM32F765xx || STM32F767xx ||
|
||||
STM32F769xx || STM32F777xx || STM32F779xx || STM32F730xx */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @defgroup DMAEx_Exported_Functions DMAEx Exported Functions
|
||||
* @brief DMAEx Exported functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup DMAEx_Exported_Functions_Group1 Extended features functions
|
||||
* @brief Extended features functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* IO operation functions *******************************************************/
|
||||
HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength);
|
||||
HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength);
|
||||
HAL_StatusTypeDef HAL_DMAEx_ChangeMemory(DMA_HandleTypeDef *hdma, uint32_t Address, HAL_DMA_MemoryTypeDef memory);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup DMAEx_Private_Macros DMA Private Macros
|
||||
* @brief DMAEx private macros
|
||||
* @{
|
||||
*/
|
||||
#if defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx) ||\
|
||||
defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) ||\
|
||||
defined (STM32F779xx) || defined (STM32F730xx)
|
||||
#define IS_DMA_CHANNEL(CHANNEL) (((CHANNEL) == DMA_CHANNEL_0) || \
|
||||
((CHANNEL) == DMA_CHANNEL_1) || \
|
||||
((CHANNEL) == DMA_CHANNEL_2) || \
|
||||
((CHANNEL) == DMA_CHANNEL_3) || \
|
||||
((CHANNEL) == DMA_CHANNEL_4) || \
|
||||
((CHANNEL) == DMA_CHANNEL_5) || \
|
||||
((CHANNEL) == DMA_CHANNEL_6) || \
|
||||
((CHANNEL) == DMA_CHANNEL_7) || \
|
||||
((CHANNEL) == DMA_CHANNEL_8) || \
|
||||
((CHANNEL) == DMA_CHANNEL_9) || \
|
||||
((CHANNEL) == DMA_CHANNEL_10) || \
|
||||
((CHANNEL) == DMA_CHANNEL_11) || \
|
||||
((CHANNEL) == DMA_CHANNEL_12) || \
|
||||
((CHANNEL) == DMA_CHANNEL_13) || \
|
||||
((CHANNEL) == DMA_CHANNEL_14) || \
|
||||
((CHANNEL) == DMA_CHANNEL_15))
|
||||
#else
|
||||
#define IS_DMA_CHANNEL(CHANNEL) (((CHANNEL) == DMA_CHANNEL_0) || \
|
||||
((CHANNEL) == DMA_CHANNEL_1) || \
|
||||
((CHANNEL) == DMA_CHANNEL_2) || \
|
||||
((CHANNEL) == DMA_CHANNEL_3) || \
|
||||
((CHANNEL) == DMA_CHANNEL_4) || \
|
||||
((CHANNEL) == DMA_CHANNEL_5) || \
|
||||
((CHANNEL) == DMA_CHANNEL_6) || \
|
||||
((CHANNEL) == DMA_CHANNEL_7))
|
||||
#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx || STM32F765xx || STM32F767xx ||
|
||||
STM32F769xx || STM32F777xx || STM32F779xx || STM32F730xx*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
/** @defgroup DMAEx_Private_Functions DMAEx Private Functions
|
||||
* @brief DMAEx Private functions
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32F7xx_HAL_DMA_H */
|
||||
|
||||
@@ -0,0 +1,317 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f7xx_hal_exti.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of EXTI HAL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2018 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef STM32F7xx_HAL_EXTI_H
|
||||
#define STM32F7xx_HAL_EXTI_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f7xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F7xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup EXTI EXTI
|
||||
* @brief EXTI HAL module driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
|
||||
/** @defgroup EXTI_Exported_Types EXTI Exported Types
|
||||
* @{
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_EXTI_COMMON_CB_ID = 0x00U
|
||||
} EXTI_CallbackIDTypeDef;
|
||||
|
||||
/**
|
||||
* @brief EXTI Handle structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t Line; /*!< Exti line number */
|
||||
void (* PendingCallback)(void); /*!< Exti pending callback */
|
||||
} EXTI_HandleTypeDef;
|
||||
|
||||
/**
|
||||
* @brief EXTI Configuration structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t Line; /*!< The Exti line to be configured. This parameter
|
||||
can be a value of @ref EXTI_Line */
|
||||
uint32_t Mode; /*!< The Exit Mode to be configured for a core.
|
||||
This parameter can be a combination of @ref EXTI_Mode */
|
||||
uint32_t Trigger; /*!< The Exti Trigger to be configured. This parameter
|
||||
can be a value of @ref EXTI_Trigger */
|
||||
uint32_t GPIOSel; /*!< The Exti GPIO multiplexer selection to be configured.
|
||||
This parameter is only possible for line 0 to 15. It
|
||||
can be a value of @ref EXTI_GPIOSel */
|
||||
} EXTI_ConfigTypeDef;
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup EXTI_Exported_Constants EXTI Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup EXTI_Line EXTI Line
|
||||
* @{
|
||||
*/
|
||||
#define EXTI_LINE_0 (EXTI_GPIO | 0x00u) /*!< External interrupt line 0 */
|
||||
#define EXTI_LINE_1 (EXTI_GPIO | 0x01u) /*!< External interrupt line 1 */
|
||||
#define EXTI_LINE_2 (EXTI_GPIO | 0x02u) /*!< External interrupt line 2 */
|
||||
#define EXTI_LINE_3 (EXTI_GPIO | 0x03u) /*!< External interrupt line 3 */
|
||||
#define EXTI_LINE_4 (EXTI_GPIO | 0x04u) /*!< External interrupt line 4 */
|
||||
#define EXTI_LINE_5 (EXTI_GPIO | 0x05u) /*!< External interrupt line 5 */
|
||||
#define EXTI_LINE_6 (EXTI_GPIO | 0x06u) /*!< External interrupt line 6 */
|
||||
#define EXTI_LINE_7 (EXTI_GPIO | 0x07u) /*!< External interrupt line 7 */
|
||||
#define EXTI_LINE_8 (EXTI_GPIO | 0x08u) /*!< External interrupt line 8 */
|
||||
#define EXTI_LINE_9 (EXTI_GPIO | 0x09u) /*!< External interrupt line 9 */
|
||||
#define EXTI_LINE_10 (EXTI_GPIO | 0x0Au) /*!< External interrupt line 10 */
|
||||
#define EXTI_LINE_11 (EXTI_GPIO | 0x0Bu) /*!< External interrupt line 11 */
|
||||
#define EXTI_LINE_12 (EXTI_GPIO | 0x0Cu) /*!< External interrupt line 12 */
|
||||
#define EXTI_LINE_13 (EXTI_GPIO | 0x0Du) /*!< External interrupt line 13 */
|
||||
#define EXTI_LINE_14 (EXTI_GPIO | 0x0Eu) /*!< External interrupt line 14 */
|
||||
#define EXTI_LINE_15 (EXTI_GPIO | 0x0Fu) /*!< External interrupt line 15 */
|
||||
#define EXTI_LINE_16 (EXTI_CONFIG | 0x10u) /*!< External interrupt line 16 Connected to the PVD Output */
|
||||
#define EXTI_LINE_17 (EXTI_CONFIG | 0x11u) /*!< External interrupt line 17 Connected to the RTC Alarm event */
|
||||
#define EXTI_LINE_18 (EXTI_CONFIG | 0x12u) /*!< External interrupt line 18 Connected to the USB OTG FS Wakeup from suspend event */
|
||||
#if defined(ETH)
|
||||
#define EXTI_LINE_19 (EXTI_CONFIG | 0x13u) /*!< External interrupt line 19 Connected to the Ethernet Wakeup event */
|
||||
#else
|
||||
#define EXTI_LINE_19 (EXTI_RESERVED | 0x13u) /*!< No interrupt supported in this line */
|
||||
#endif /* ETH */
|
||||
#define EXTI_LINE_20 (EXTI_CONFIG | 0x14u) /*!< External interrupt line 20 Connected to the USB OTG HS (configured in FS) Wakeup event */
|
||||
#define EXTI_LINE_21 (EXTI_CONFIG | 0x15u) /*!< External interrupt line 21 Connected to the RTC Tamper and Time Stamp events */
|
||||
#define EXTI_LINE_22 (EXTI_CONFIG | 0x16u) /*!< External interrupt line 22 Connected to the RTC Wakeup event */
|
||||
#define EXTI_LINE_23 (EXTI_CONFIG | 0x17u) /*!< External interrupt line 23 Connected to the LPTIM Wakeup event */
|
||||
#if defined(EXTI_IMR_IM24)
|
||||
#define EXTI_LINE_24 (EXTI_CONFIG | 0x18u) /*!< External interrupt line 24 Connected to the MDIO Slave global Interrupt Wakeup event */
|
||||
#endif /* EXTI_IMR_IM24 */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup EXTI_Mode EXTI Mode
|
||||
* @{
|
||||
*/
|
||||
#define EXTI_MODE_NONE 0x00000000u
|
||||
#define EXTI_MODE_INTERRUPT 0x00000001u
|
||||
#define EXTI_MODE_EVENT 0x00000002u
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup EXTI_Trigger EXTI Trigger
|
||||
* @{
|
||||
*/
|
||||
|
||||
#define EXTI_TRIGGER_NONE 0x00000000u
|
||||
#define EXTI_TRIGGER_RISING 0x00000001u
|
||||
#define EXTI_TRIGGER_FALLING 0x00000002u
|
||||
#define EXTI_TRIGGER_RISING_FALLING (EXTI_TRIGGER_RISING | EXTI_TRIGGER_FALLING)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup EXTI_GPIOSel EXTI GPIOSel
|
||||
* @brief
|
||||
* @{
|
||||
*/
|
||||
#define EXTI_GPIOA 0x00000000u
|
||||
#define EXTI_GPIOB 0x00000001u
|
||||
#define EXTI_GPIOC 0x00000002u
|
||||
#define EXTI_GPIOD 0x00000003u
|
||||
#define EXTI_GPIOE 0x00000004u
|
||||
#define EXTI_GPIOF 0x00000005u
|
||||
#define EXTI_GPIOG 0x00000006u
|
||||
#define EXTI_GPIOH 0x00000007u
|
||||
#define EXTI_GPIOI 0x00000008u
|
||||
#define EXTI_GPIOJ 0x00000009u
|
||||
#if defined (GPIOK)
|
||||
#define EXTI_GPIOK 0x0000000Au
|
||||
#endif /* GPIOK */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/** @defgroup EXTI_Exported_Macros EXTI Exported Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private constants --------------------------------------------------------*/
|
||||
/** @defgroup EXTI_Private_Constants EXTI Private Constants
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @brief EXTI Line property definition
|
||||
*/
|
||||
#define EXTI_PROPERTY_SHIFT 24u
|
||||
#define EXTI_CONFIG (0x02uL << EXTI_PROPERTY_SHIFT)
|
||||
#define EXTI_GPIO ((0x04uL << EXTI_PROPERTY_SHIFT) | EXTI_CONFIG)
|
||||
#define EXTI_RESERVED (0x08uL << EXTI_PROPERTY_SHIFT)
|
||||
#define EXTI_PROPERTY_MASK (EXTI_CONFIG | EXTI_GPIO)
|
||||
|
||||
/**
|
||||
* @brief EXTI bit usage
|
||||
*/
|
||||
#define EXTI_PIN_MASK 0x0000001Fu
|
||||
|
||||
/**
|
||||
* @brief EXTI Mask for interrupt & event mode
|
||||
*/
|
||||
#define EXTI_MODE_MASK (EXTI_MODE_EVENT | EXTI_MODE_INTERRUPT)
|
||||
|
||||
/**
|
||||
* @brief EXTI Mask for trigger possibilities
|
||||
*/
|
||||
#define EXTI_TRIGGER_MASK (EXTI_TRIGGER_RISING | EXTI_TRIGGER_FALLING)
|
||||
|
||||
/**
|
||||
* @brief EXTI Line number
|
||||
*/
|
||||
#if defined(EXTI_IMR_IM24)
|
||||
#define EXTI_LINE_NB 25u
|
||||
#else
|
||||
#define EXTI_LINE_NB 24u
|
||||
#endif /* EXTI_IMR_IM24 */
|
||||
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup EXTI_Private_Macros EXTI Private Macros
|
||||
* @{
|
||||
*/
|
||||
#define IS_EXTI_LINE(__EXTI_LINE__) ((((__EXTI_LINE__) & ~(EXTI_PROPERTY_MASK | EXTI_PIN_MASK)) == 0x00u) && \
|
||||
((((__EXTI_LINE__) & EXTI_PROPERTY_MASK) == EXTI_CONFIG) || \
|
||||
(((__EXTI_LINE__) & EXTI_PROPERTY_MASK) == EXTI_GPIO)) && \
|
||||
(((__EXTI_LINE__) & EXTI_PIN_MASK) < EXTI_LINE_NB))
|
||||
|
||||
#define IS_EXTI_MODE(__EXTI_LINE__) ((((__EXTI_LINE__) & EXTI_MODE_MASK) != 0x00u) && \
|
||||
(((__EXTI_LINE__) & ~EXTI_MODE_MASK) == 0x00u))
|
||||
|
||||
#define IS_EXTI_TRIGGER(__EXTI_LINE__) (((__EXTI_LINE__) & ~EXTI_TRIGGER_MASK) == 0x00u)
|
||||
|
||||
#define IS_EXTI_PENDING_EDGE(__EXTI_LINE__) (((__EXTI_LINE__) == EXTI_TRIGGER_FALLING) || \
|
||||
((__EXTI_LINE__) == EXTI_TRIGGER_RISING) || \
|
||||
((__EXTI_LINE__) == EXTI_TRIGGER_RISING_FALLING))
|
||||
|
||||
#define IS_EXTI_CONFIG_LINE(__EXTI_LINE__) (((__EXTI_LINE__) & EXTI_CONFIG) != 0x00u)
|
||||
|
||||
#if defined (GPIOK)
|
||||
#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \
|
||||
((__PORT__) == EXTI_GPIOB) || \
|
||||
((__PORT__) == EXTI_GPIOC) || \
|
||||
((__PORT__) == EXTI_GPIOD) || \
|
||||
((__PORT__) == EXTI_GPIOE) || \
|
||||
((__PORT__) == EXTI_GPIOF) || \
|
||||
((__PORT__) == EXTI_GPIOG) || \
|
||||
((__PORT__) == EXTI_GPIOH) || \
|
||||
((__PORT__) == EXTI_GPIOI) || \
|
||||
((__PORT__) == EXTI_GPIOJ) || \
|
||||
((__PORT__) == EXTI_GPIOK))
|
||||
#else
|
||||
#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \
|
||||
((__PORT__) == EXTI_GPIOB) || \
|
||||
((__PORT__) == EXTI_GPIOC) || \
|
||||
((__PORT__) == EXTI_GPIOD) || \
|
||||
((__PORT__) == EXTI_GPIOE) || \
|
||||
((__PORT__) == EXTI_GPIOF) || \
|
||||
((__PORT__) == EXTI_GPIOG) || \
|
||||
((__PORT__) == EXTI_GPIOH) || \
|
||||
((__PORT__) == EXTI_GPIOI) || \
|
||||
((__PORT__) == EXTI_GPIOJ))
|
||||
#endif /* GPIOK */
|
||||
|
||||
#define IS_EXTI_GPIO_PIN(__PIN__) ((__PIN__) < 16U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @defgroup EXTI_Exported_Functions EXTI Exported Functions
|
||||
* @brief EXTI Exported Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup EXTI_Exported_Functions_Group1 Configuration functions
|
||||
* @brief Configuration functions
|
||||
* @{
|
||||
*/
|
||||
/* Configuration functions ****************************************************/
|
||||
HAL_StatusTypeDef HAL_EXTI_SetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig);
|
||||
HAL_StatusTypeDef HAL_EXTI_GetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig);
|
||||
HAL_StatusTypeDef HAL_EXTI_ClearConfigLine(EXTI_HandleTypeDef *hexti);
|
||||
HAL_StatusTypeDef HAL_EXTI_RegisterCallback(EXTI_HandleTypeDef *hexti, EXTI_CallbackIDTypeDef CallbackID, void (*pPendingCbfn)(void));
|
||||
HAL_StatusTypeDef HAL_EXTI_GetHandle(EXTI_HandleTypeDef *hexti, uint32_t ExtiLine);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup EXTI_Exported_Functions_Group2 IO operation functions
|
||||
* @brief IO operation functions
|
||||
* @{
|
||||
*/
|
||||
/* IO operation functions *****************************************************/
|
||||
void HAL_EXTI_IRQHandler(EXTI_HandleTypeDef *hexti);
|
||||
uint32_t HAL_EXTI_GetPending(EXTI_HandleTypeDef *hexti, uint32_t Edge);
|
||||
void HAL_EXTI_ClearPending(EXTI_HandleTypeDef *hexti, uint32_t Edge);
|
||||
void HAL_EXTI_GenerateSWI(EXTI_HandleTypeDef *hexti);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* STM32F7xx_HAL_EXTI_H */
|
||||
|
||||
@@ -0,0 +1,415 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f7xx_hal_flash.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of FLASH HAL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file in
|
||||
* the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F7xx_HAL_FLASH_H
|
||||
#define __STM32F7xx_HAL_FLASH_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f7xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F7xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup FLASH
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/** @defgroup FLASH_Exported_Types FLASH Exported Types
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief FLASH Procedure structure definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
FLASH_PROC_NONE = 0U,
|
||||
FLASH_PROC_SECTERASE,
|
||||
FLASH_PROC_MASSERASE,
|
||||
FLASH_PROC_PROGRAM
|
||||
} FLASH_ProcedureTypeDef;
|
||||
|
||||
|
||||
/**
|
||||
* @brief FLASH handle Structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
__IO FLASH_ProcedureTypeDef ProcedureOnGoing; /* Internal variable to indicate which procedure is ongoing or not in IT context */
|
||||
|
||||
__IO uint32_t NbSectorsToErase; /* Internal variable to save the remaining sectors to erase in IT context */
|
||||
|
||||
__IO uint8_t VoltageForErase; /* Internal variable to provide voltage range selected by user in IT context */
|
||||
|
||||
__IO uint32_t Sector; /* Internal variable to define the current sector which is erasing */
|
||||
|
||||
__IO uint32_t Address; /* Internal variable to save address selected for program */
|
||||
|
||||
HAL_LockTypeDef Lock; /* FLASH locking object */
|
||||
|
||||
__IO uint32_t ErrorCode; /* FLASH error code */
|
||||
|
||||
}FLASH_ProcessTypeDef;
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup FLASH_Exported_Constants FLASH Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup FLASH_Error_Code FLASH Error Code
|
||||
* @brief FLASH Error Code
|
||||
* @{
|
||||
*/
|
||||
#define HAL_FLASH_ERROR_NONE ((uint32_t)0x00000000U) /*!< No error */
|
||||
#define HAL_FLASH_ERROR_ERS ((uint32_t)0x00000002U) /*!< Programming Sequence error */
|
||||
#define HAL_FLASH_ERROR_PGP ((uint32_t)0x00000004U) /*!< Programming Parallelism error */
|
||||
#define HAL_FLASH_ERROR_PGA ((uint32_t)0x00000008U) /*!< Programming Alignment error */
|
||||
#define HAL_FLASH_ERROR_WRP ((uint32_t)0x00000010U) /*!< Write protection error */
|
||||
#define HAL_FLASH_ERROR_OPERATION ((uint32_t)0x00000020U) /*!< Operation Error */
|
||||
#define HAL_FLASH_ERROR_RD ((uint32_t)0x00000040U) /*!< Read Protection Error */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FLASH_Type_Program FLASH Type Program
|
||||
* @{
|
||||
*/
|
||||
#define FLASH_TYPEPROGRAM_BYTE ((uint32_t)0x00U) /*!< Program byte (8-bit) at a specified address */
|
||||
#define FLASH_TYPEPROGRAM_HALFWORD ((uint32_t)0x01U) /*!< Program a half-word (16-bit) at a specified address */
|
||||
#define FLASH_TYPEPROGRAM_WORD ((uint32_t)0x02U) /*!< Program a word (32-bit) at a specified address */
|
||||
#define FLASH_TYPEPROGRAM_DOUBLEWORD ((uint32_t)0x03U) /*!< Program a double word (64-bit) at a specified address */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FLASH_Flag_definition FLASH Flag definition
|
||||
* @brief Flag definition
|
||||
* @{
|
||||
*/
|
||||
#define FLASH_FLAG_EOP FLASH_SR_EOP /*!< FLASH End of Operation flag */
|
||||
#define FLASH_FLAG_OPERR FLASH_SR_OPERR /*!< FLASH operation Error flag */
|
||||
#define FLASH_FLAG_WRPERR FLASH_SR_WRPERR /*!< FLASH Write protected error flag */
|
||||
#define FLASH_FLAG_PGAERR FLASH_SR_PGAERR /*!< FLASH Programming Alignment error flag */
|
||||
#define FLASH_FLAG_PGPERR FLASH_SR_PGPERR /*!< FLASH Programming Parallelism error flag */
|
||||
#define FLASH_FLAG_ERSERR FLASH_SR_ERSERR /*!< FLASH Erasing Sequence error flag */
|
||||
#define FLASH_FLAG_BSY FLASH_SR_BSY /*!< FLASH Busy flag */
|
||||
|
||||
#if defined (FLASH_OPTCR2_PCROP)
|
||||
#define FLASH_FLAG_RDERR FLASH_SR_RDERR /*!< FLASH Read protection error flag */
|
||||
#define FLASH_FLAG_ALL_ERRORS (FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR | FLASH_FLAG_PGAERR | \
|
||||
FLASH_FLAG_PGPERR | FLASH_FLAG_ERSERR | FLASH_FLAG_RDERR)
|
||||
#else
|
||||
#define FLASH_FLAG_ALL_ERRORS (FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR | FLASH_FLAG_PGAERR | \
|
||||
FLASH_FLAG_PGPERR | FLASH_FLAG_ERSERR)
|
||||
#endif /* FLASH_OPTCR2_PCROP */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FLASH_Interrupt_definition FLASH Interrupt definition
|
||||
* @brief FLASH Interrupt definition
|
||||
* @{
|
||||
*/
|
||||
#define FLASH_IT_EOP FLASH_CR_EOPIE /*!< End of FLASH Operation Interrupt source */
|
||||
#define FLASH_IT_ERR ((uint32_t)0x02000000U) /*!< Error Interrupt source */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FLASH_Program_Parallelism FLASH Program Parallelism
|
||||
* @{
|
||||
*/
|
||||
#define FLASH_PSIZE_BYTE ((uint32_t)0x00000000U)
|
||||
#define FLASH_PSIZE_HALF_WORD ((uint32_t)FLASH_CR_PSIZE_0)
|
||||
#define FLASH_PSIZE_WORD ((uint32_t)FLASH_CR_PSIZE_1)
|
||||
#define FLASH_PSIZE_DOUBLE_WORD ((uint32_t)FLASH_CR_PSIZE)
|
||||
#define CR_PSIZE_MASK ((uint32_t)0xFFFFFCFFU)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FLASH_Keys FLASH Keys
|
||||
* @{
|
||||
*/
|
||||
#define FLASH_KEY1 ((uint32_t)0x45670123U)
|
||||
#define FLASH_KEY2 ((uint32_t)0xCDEF89ABU)
|
||||
#define FLASH_OPT_KEY1 ((uint32_t)0x08192A3BU)
|
||||
#define FLASH_OPT_KEY2 ((uint32_t)0x4C5D6E7FU)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FLASH_Sectors FLASH Sectors
|
||||
* @{
|
||||
*/
|
||||
#if (FLASH_SECTOR_TOTAL == 2)
|
||||
#define FLASH_SECTOR_0 ((uint32_t)0U) /*!< Sector Number 0 */
|
||||
#define FLASH_SECTOR_1 ((uint32_t)1U) /*!< Sector Number 1 */
|
||||
#elif (FLASH_SECTOR_TOTAL == 4)
|
||||
#define FLASH_SECTOR_0 ((uint32_t)0U) /*!< Sector Number 0 */
|
||||
#define FLASH_SECTOR_1 ((uint32_t)1U) /*!< Sector Number 1 */
|
||||
#define FLASH_SECTOR_2 ((uint32_t)2U) /*!< Sector Number 2 */
|
||||
#define FLASH_SECTOR_3 ((uint32_t)3U) /*!< Sector Number 3 */
|
||||
#else
|
||||
#define FLASH_SECTOR_0 ((uint32_t)0U) /*!< Sector Number 0 */
|
||||
#define FLASH_SECTOR_1 ((uint32_t)1U) /*!< Sector Number 1 */
|
||||
#define FLASH_SECTOR_2 ((uint32_t)2U) /*!< Sector Number 2 */
|
||||
#define FLASH_SECTOR_3 ((uint32_t)3U) /*!< Sector Number 3 */
|
||||
#define FLASH_SECTOR_4 ((uint32_t)4U) /*!< Sector Number 4 */
|
||||
#define FLASH_SECTOR_5 ((uint32_t)5U) /*!< Sector Number 5 */
|
||||
#define FLASH_SECTOR_6 ((uint32_t)6U) /*!< Sector Number 6 */
|
||||
#define FLASH_SECTOR_7 ((uint32_t)7U) /*!< Sector Number 7 */
|
||||
#endif /* FLASH_SECTOR_TOTAL */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/** @defgroup FLASH_Exported_Macros FLASH Exported Macros
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @brief Set the FLASH Latency.
|
||||
* @param __LATENCY__ FLASH Latency
|
||||
* The value of this parameter depend on device used within the same series
|
||||
* @retval none
|
||||
*/
|
||||
#define __HAL_FLASH_SET_LATENCY(__LATENCY__) \
|
||||
MODIFY_REG(FLASH->ACR, FLASH_ACR_LATENCY, (uint32_t)(__LATENCY__))
|
||||
|
||||
/**
|
||||
* @brief Get the FLASH Latency.
|
||||
* @retval FLASH Latency
|
||||
* The value of this parameter depend on device used within the same series
|
||||
*/
|
||||
#define __HAL_FLASH_GET_LATENCY() (READ_BIT((FLASH->ACR), FLASH_ACR_LATENCY))
|
||||
|
||||
/**
|
||||
* @brief Enable the FLASH prefetch buffer.
|
||||
* @retval none
|
||||
*/
|
||||
#define __HAL_FLASH_PREFETCH_BUFFER_ENABLE() (FLASH->ACR |= FLASH_ACR_PRFTEN)
|
||||
|
||||
/**
|
||||
* @brief Disable the FLASH prefetch buffer.
|
||||
* @retval none
|
||||
*/
|
||||
#define __HAL_FLASH_PREFETCH_BUFFER_DISABLE() (FLASH->ACR &= (~FLASH_ACR_PRFTEN))
|
||||
|
||||
/**
|
||||
* @brief Enable the FLASH Adaptive Real-Time memory accelerator.
|
||||
* @note The ART accelerator is available only for flash access on ITCM interface.
|
||||
* @retval none
|
||||
*/
|
||||
#define __HAL_FLASH_ART_ENABLE() SET_BIT(FLASH->ACR, FLASH_ACR_ARTEN)
|
||||
|
||||
/**
|
||||
* @brief Disable the FLASH Adaptive Real-Time memory accelerator.
|
||||
* @retval none
|
||||
*/
|
||||
#define __HAL_FLASH_ART_DISABLE() CLEAR_BIT(FLASH->ACR, FLASH_ACR_ARTEN)
|
||||
|
||||
/**
|
||||
* @brief Resets the FLASH Adaptive Real-Time memory accelerator.
|
||||
* @note This function must be used only when the Adaptive Real-Time memory accelerator
|
||||
* is disabled.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_FLASH_ART_RESET() (FLASH->ACR |= FLASH_ACR_ARTRST)
|
||||
|
||||
/**
|
||||
* @brief Enable the specified FLASH interrupt.
|
||||
* @param __INTERRUPT__ FLASH interrupt
|
||||
* This parameter can be any combination of the following values:
|
||||
* @arg FLASH_IT_EOP: End of FLASH Operation Interrupt
|
||||
* @arg FLASH_IT_ERR: Error Interrupt
|
||||
* @retval none
|
||||
*/
|
||||
#define __HAL_FLASH_ENABLE_IT(__INTERRUPT__) (FLASH->CR |= (__INTERRUPT__))
|
||||
|
||||
/**
|
||||
* @brief Disable the specified FLASH interrupt.
|
||||
* @param __INTERRUPT__ FLASH interrupt
|
||||
* This parameter can be any combination of the following values:
|
||||
* @arg FLASH_IT_EOP: End of FLASH Operation Interrupt
|
||||
* @arg FLASH_IT_ERR: Error Interrupt
|
||||
* @retval none
|
||||
*/
|
||||
#define __HAL_FLASH_DISABLE_IT(__INTERRUPT__) (FLASH->CR &= ~(uint32_t)(__INTERRUPT__))
|
||||
|
||||
/**
|
||||
* @brief Get the specified FLASH flag status.
|
||||
* @param __FLAG__ specifies the FLASH flag to check.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg FLASH_FLAG_EOP : FLASH End of Operation flag
|
||||
* @arg FLASH_FLAG_OPERR : FLASH operation Error flag
|
||||
* @arg FLASH_FLAG_WRPERR: FLASH Write protected error flag
|
||||
* @arg FLASH_FLAG_PGAERR: FLASH Programming Alignment error flag
|
||||
* @arg FLASH_FLAG_PGPERR: FLASH Programming Parallelism error flag
|
||||
* @arg FLASH_FLAG_ERSERR : FLASH Erasing Sequence error flag
|
||||
* @arg FLASH_FLAG_BSY : FLASH Busy flag
|
||||
* @retval The new state of __FLAG__ (SET or RESET).
|
||||
*/
|
||||
#define __HAL_FLASH_GET_FLAG(__FLAG__) ((FLASH->SR & (__FLAG__)))
|
||||
|
||||
/**
|
||||
* @brief Clear the specified FLASH flag.
|
||||
* @param __FLAG__ specifies the FLASH flags to clear.
|
||||
* This parameter can be any combination of the following values:
|
||||
* @arg FLASH_FLAG_EOP : FLASH End of Operation flag
|
||||
* @arg FLASH_FLAG_OPERR : FLASH operation Error flag
|
||||
* @arg FLASH_FLAG_WRPERR: FLASH Write protected error flag
|
||||
* @arg FLASH_FLAG_PGAERR: FLASH Programming Alignment error flag
|
||||
* @arg FLASH_FLAG_PGPERR: FLASH Programming Parallelism error flag
|
||||
* @arg FLASH_FLAG_ERSERR : FLASH Erasing Sequence error flag
|
||||
* @retval none
|
||||
*/
|
||||
#define __HAL_FLASH_CLEAR_FLAG(__FLAG__) (FLASH->SR = (__FLAG__))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Include FLASH HAL Extension module */
|
||||
#include "stm32f7xx_hal_flash_ex.h"
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup FLASH_Exported_Functions
|
||||
* @{
|
||||
*/
|
||||
/** @addtogroup FLASH_Exported_Functions_Group1
|
||||
* @{
|
||||
*/
|
||||
/* Program operation functions ***********************************************/
|
||||
HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data);
|
||||
HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data);
|
||||
/* FLASH IRQ handler method */
|
||||
void HAL_FLASH_IRQHandler(void);
|
||||
/* Callbacks in non blocking modes */
|
||||
void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue);
|
||||
void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup FLASH_Exported_Functions_Group2
|
||||
* @{
|
||||
*/
|
||||
/* Peripheral Control functions **********************************************/
|
||||
HAL_StatusTypeDef HAL_FLASH_Unlock(void);
|
||||
HAL_StatusTypeDef HAL_FLASH_Lock(void);
|
||||
HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void);
|
||||
HAL_StatusTypeDef HAL_FLASH_OB_Lock(void);
|
||||
/* Option bytes control */
|
||||
HAL_StatusTypeDef HAL_FLASH_OB_Launch(void);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup FLASH_Exported_Functions_Group3
|
||||
* @{
|
||||
*/
|
||||
/* Peripheral State functions ************************************************/
|
||||
uint32_t HAL_FLASH_GetError(void);
|
||||
HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/** @defgroup FLASH_Private_Variables FLASH Private Variables
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/** @defgroup FLASH_Private_Constants FLASH Private Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief OPTCR register byte 1 (Bits[15:8]) base address
|
||||
*/
|
||||
#define OPTCR_BYTE1_ADDRESS ((uint32_t)0x40023C15)
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup FLASH_Private_Macros FLASH Private Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup FLASH_IS_FLASH_Definitions FLASH Private macros to check input parameters
|
||||
* @{
|
||||
*/
|
||||
#define IS_FLASH_TYPEPROGRAM(VALUE)(((VALUE) == FLASH_TYPEPROGRAM_BYTE) || \
|
||||
((VALUE) == FLASH_TYPEPROGRAM_HALFWORD) || \
|
||||
((VALUE) == FLASH_TYPEPROGRAM_WORD) || \
|
||||
((VALUE) == FLASH_TYPEPROGRAM_DOUBLEWORD))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
/** @defgroup FLASH_Private_Functions FLASH Private Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32F7xx_HAL_FLASH_H */
|
||||
|
||||
@@ -0,0 +1,697 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f7xx_hal_flash_ex.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of FLASH HAL Extension module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file in
|
||||
* the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F7xx_HAL_FLASH_EX_H
|
||||
#define __STM32F7xx_HAL_FLASH_EX_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f7xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F7xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup FLASHEx
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/** @defgroup FLASHEx_Exported_Types FLASH Exported Types
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief FLASH Erase structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t TypeErase; /*!< Mass erase or sector Erase.
|
||||
This parameter can be a value of @ref FLASHEx_Type_Erase */
|
||||
|
||||
#if defined (FLASH_OPTCR_nDBANK)
|
||||
uint32_t Banks; /*!< Select banks to erase when Mass erase is enabled.
|
||||
This parameter must be a value of @ref FLASHEx_Banks */
|
||||
#endif /* FLASH_OPTCR_nDBANK */
|
||||
|
||||
uint32_t Sector; /*!< Initial FLASH sector to erase when Mass erase is disabled
|
||||
This parameter must be a value of @ref FLASHEx_Sectors */
|
||||
|
||||
uint32_t NbSectors; /*!< Number of sectors to be erased.
|
||||
This parameter must be a value between 1 and (max number of sectors - value of Initial sector)*/
|
||||
|
||||
uint32_t VoltageRange;/*!< The device voltage range which defines the erase parallelism
|
||||
This parameter must be a value of @ref FLASHEx_Voltage_Range */
|
||||
|
||||
} FLASH_EraseInitTypeDef;
|
||||
|
||||
/**
|
||||
* @brief FLASH Option Bytes Program structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t OptionType; /*!< Option byte to be configured.
|
||||
This parameter can be a value of @ref FLASHEx_Option_Type */
|
||||
|
||||
uint32_t WRPState; /*!< Write protection activation or deactivation.
|
||||
This parameter can be a value of @ref FLASHEx_WRP_State */
|
||||
|
||||
uint32_t WRPSector; /*!< Specifies the sector(s) to be write protected.
|
||||
The value of this parameter depend on device used within the same series */
|
||||
|
||||
uint32_t RDPLevel; /*!< Set the read protection level.
|
||||
This parameter can be a value of @ref FLASHEx_Option_Bytes_Read_Protection */
|
||||
|
||||
uint32_t BORLevel; /*!< Set the BOR Level.
|
||||
This parameter can be a value of @ref FLASHEx_BOR_Reset_Level */
|
||||
|
||||
uint32_t USERConfig; /*!< Program the FLASH User Option Byte: WWDG_SW / IWDG_SW / RST_STOP / RST_STDBY /
|
||||
IWDG_FREEZE_STOP / IWDG_FREEZE_SANDBY / nDBANK / nDBOOT.
|
||||
nDBANK / nDBOOT are only available for STM32F76xxx/STM32F77xxx devices */
|
||||
|
||||
uint32_t BootAddr0; /*!< Boot base address when Boot pin = 0.
|
||||
This parameter can be a value of @ref FLASHEx_Boot_Address */
|
||||
|
||||
uint32_t BootAddr1; /*!< Boot base address when Boot pin = 1.
|
||||
This parameter can be a value of @ref FLASHEx_Boot_Address */
|
||||
|
||||
#if defined (FLASH_OPTCR2_PCROP)
|
||||
uint32_t PCROPSector; /*!< Set the PCROP sector.
|
||||
This parameter can be a value of @ref FLASHEx_Option_Bytes_PCROP_Sectors */
|
||||
|
||||
uint32_t PCROPRdp; /*!< Set the PCROP_RDP option.
|
||||
This parameter can be a value of @ref FLASHEx_Option_Bytes_PCROP_RDP */
|
||||
#endif /* FLASH_OPTCR2_PCROP */
|
||||
|
||||
} FLASH_OBProgramInitTypeDef;
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
|
||||
/** @defgroup FLASHEx_Exported_Constants FLASH Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup FLASHEx_Type_Erase FLASH Type Erase
|
||||
* @{
|
||||
*/
|
||||
#define FLASH_TYPEERASE_SECTORS ((uint32_t)0x00U) /*!< Sectors erase only */
|
||||
#define FLASH_TYPEERASE_MASSERASE ((uint32_t)0x01U) /*!< Flash Mass erase activation */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FLASHEx_Voltage_Range FLASH Voltage Range
|
||||
* @{
|
||||
*/
|
||||
#define FLASH_VOLTAGE_RANGE_1 ((uint32_t)0x00U) /*!< Device operating range: 1.8V to 2.1V */
|
||||
#define FLASH_VOLTAGE_RANGE_2 ((uint32_t)0x01U) /*!< Device operating range: 2.1V to 2.7V */
|
||||
#define FLASH_VOLTAGE_RANGE_3 ((uint32_t)0x02U) /*!< Device operating range: 2.7V to 3.6V */
|
||||
#define FLASH_VOLTAGE_RANGE_4 ((uint32_t)0x03U) /*!< Device operating range: 2.7V to 3.6V + External Vpp */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FLASHEx_WRP_State FLASH WRP State
|
||||
* @{
|
||||
*/
|
||||
#define OB_WRPSTATE_DISABLE ((uint32_t)0x00U) /*!< Disable the write protection of the desired bank 1 sectors */
|
||||
#define OB_WRPSTATE_ENABLE ((uint32_t)0x01U) /*!< Enable the write protection of the desired bank 1 sectors */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FLASHEx_Option_Type FLASH Option Type
|
||||
* @{
|
||||
*/
|
||||
#define OPTIONBYTE_WRP ((uint32_t)0x01U) /*!< WRP option byte configuration */
|
||||
#define OPTIONBYTE_RDP ((uint32_t)0x02U) /*!< RDP option byte configuration */
|
||||
#define OPTIONBYTE_USER ((uint32_t)0x04U) /*!< USER option byte configuration */
|
||||
#define OPTIONBYTE_BOR ((uint32_t)0x08U) /*!< BOR option byte configuration */
|
||||
#define OPTIONBYTE_BOOTADDR_0 ((uint32_t)0x10U) /*!< Boot 0 Address configuration */
|
||||
#define OPTIONBYTE_BOOTADDR_1 ((uint32_t)0x20U) /*!< Boot 1 Address configuration */
|
||||
#if defined (FLASH_OPTCR2_PCROP)
|
||||
#define OPTIONBYTE_PCROP ((uint32_t)0x40U) /*!< PCROP configuration */
|
||||
#define OPTIONBYTE_PCROP_RDP ((uint32_t)0x80U) /*!< PCROP_RDP configuration */
|
||||
#endif /* FLASH_OPTCR2_PCROP */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FLASHEx_Option_Bytes_Read_Protection FLASH Option Bytes Read Protection
|
||||
* @{
|
||||
*/
|
||||
#define OB_RDP_LEVEL_0 ((uint8_t)0xAAU)
|
||||
#define OB_RDP_LEVEL_1 ((uint8_t)0x55U)
|
||||
#define OB_RDP_LEVEL_2 ((uint8_t)0xCCU) /*!< Warning: When enabling read protection level 2
|
||||
it s no more possible to go back to level 1 or 0 */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FLASHEx_Option_Bytes_WWatchdog FLASH Option Bytes WWatchdog
|
||||
* @{
|
||||
*/
|
||||
#define OB_WWDG_SW ((uint32_t)0x10U) /*!< Software WWDG selected */
|
||||
#define OB_WWDG_HW ((uint32_t)0x00U) /*!< Hardware WWDG selected */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/** @defgroup FLASHEx_Option_Bytes_IWatchdog FLASH Option Bytes IWatchdog
|
||||
* @{
|
||||
*/
|
||||
#define OB_IWDG_SW ((uint32_t)0x20U) /*!< Software IWDG selected */
|
||||
#define OB_IWDG_HW ((uint32_t)0x00U) /*!< Hardware IWDG selected */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FLASHEx_Option_Bytes_nRST_STOP FLASH Option Bytes nRST_STOP
|
||||
* @{
|
||||
*/
|
||||
#define OB_STOP_NO_RST ((uint32_t)0x40U) /*!< No reset generated when entering in STOP */
|
||||
#define OB_STOP_RST ((uint32_t)0x00U) /*!< Reset generated when entering in STOP */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FLASHEx_Option_Bytes_nRST_STDBY FLASH Option Bytes nRST_STDBY
|
||||
* @{
|
||||
*/
|
||||
#define OB_STDBY_NO_RST ((uint32_t)0x80U) /*!< No reset generated when entering in STANDBY */
|
||||
#define OB_STDBY_RST ((uint32_t)0x00U) /*!< Reset generated when entering in STANDBY */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FLASHEx_Option_Bytes_IWDG_FREEZE_STOP FLASH IWDG Counter Freeze in STOP
|
||||
* @{
|
||||
*/
|
||||
#define OB_IWDG_STOP_FREEZE ((uint32_t)0x00000000U) /*!< Freeze IWDG counter in STOP mode */
|
||||
#define OB_IWDG_STOP_ACTIVE ((uint32_t)0x80000000U) /*!< IWDG counter active in STOP mode */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FLASHEx_Option_Bytes_IWDG_FREEZE_SANDBY FLASH IWDG Counter Freeze in STANDBY
|
||||
* @{
|
||||
*/
|
||||
#define OB_IWDG_STDBY_FREEZE ((uint32_t)0x00000000U) /*!< Freeze IWDG counter in STANDBY mode */
|
||||
#define OB_IWDG_STDBY_ACTIVE ((uint32_t)0x40000000U) /*!< IWDG counter active in STANDBY mode */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FLASHEx_BOR_Reset_Level FLASH BOR Reset Level
|
||||
* @{
|
||||
*/
|
||||
#define OB_BOR_LEVEL3 ((uint32_t)0x00U) /*!< Supply voltage ranges from 2.70 to 3.60 V */
|
||||
#define OB_BOR_LEVEL2 ((uint32_t)0x04U) /*!< Supply voltage ranges from 2.40 to 2.70 V */
|
||||
#define OB_BOR_LEVEL1 ((uint32_t)0x08U) /*!< Supply voltage ranges from 2.10 to 2.40 V */
|
||||
#define OB_BOR_OFF ((uint32_t)0x0CU) /*!< Supply voltage ranges from 1.62 to 2.10 V */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#if defined (FLASH_OPTCR_nDBOOT)
|
||||
/** @defgroup FLASHEx_Option_Bytes_nDBOOT FLASH Option Bytes nDBOOT
|
||||
* @{
|
||||
*/
|
||||
#define OB_DUAL_BOOT_DISABLE ((uint32_t)0x10000000U) /* !< Dual Boot disable. Boot according to boot address option */
|
||||
#define OB_DUAL_BOOT_ENABLE ((uint32_t)0x00000000U) /* !< Dual Boot enable. Boot always from system memory if boot address in flash
|
||||
(Dual bank Boot mode), or RAM if Boot address option in RAM */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#endif /* FLASH_OPTCR_nDBOOT */
|
||||
|
||||
#if defined (FLASH_OPTCR_nDBANK)
|
||||
/** @defgroup FLASHEx_Option_Bytes_nDBank FLASH Single Bank or Dual Bank
|
||||
* @{
|
||||
*/
|
||||
#define OB_NDBANK_SINGLE_BANK ((uint32_t)0x20000000U) /*!< NDBANK bit is set : Single Bank mode */
|
||||
#define OB_NDBANK_DUAL_BANK ((uint32_t)0x00000000U) /*!< NDBANK bit is reset : Dual Bank mode */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#endif /* FLASH_OPTCR_nDBANK */
|
||||
|
||||
/** @defgroup FLASHEx_Boot_Address FLASH Boot Address
|
||||
* @{
|
||||
*/
|
||||
#define OB_BOOTADDR_ITCM_RAM ((uint32_t)0x0000U) /*!< Boot from ITCM RAM (0x00000000) */
|
||||
#define OB_BOOTADDR_SYSTEM ((uint32_t)0x0040U) /*!< Boot from System memory bootloader (0x00100000) */
|
||||
#define OB_BOOTADDR_ITCM_FLASH ((uint32_t)0x0080U) /*!< Boot from Flash on ITCM interface (0x00200000) */
|
||||
#define OB_BOOTADDR_AXIM_FLASH ((uint32_t)0x2000U) /*!< Boot from Flash on AXIM interface (0x08000000) */
|
||||
#define OB_BOOTADDR_DTCM_RAM ((uint32_t)0x8000U) /*!< Boot from DTCM RAM (0x20000000) */
|
||||
#define OB_BOOTADDR_SRAM1 ((uint32_t)0x8004U) /*!< Boot from SRAM1 (0x20010000) */
|
||||
#if (SRAM2_BASE == 0x2003C000U)
|
||||
#define OB_BOOTADDR_SRAM2 ((uint32_t)0x800FU) /*!< Boot from SRAM2 (0x2003C000) */
|
||||
#else
|
||||
#define OB_BOOTADDR_SRAM2 ((uint32_t)0x8013U) /*!< Boot from SRAM2 (0x2004C000) */
|
||||
#endif /* SRAM2_BASE == 0x2003C000U */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FLASH_Latency FLASH Latency
|
||||
* @{
|
||||
*/
|
||||
#define FLASH_LATENCY_0 FLASH_ACR_LATENCY_0WS /*!< FLASH Zero Latency cycle */
|
||||
#define FLASH_LATENCY_1 FLASH_ACR_LATENCY_1WS /*!< FLASH One Latency cycle */
|
||||
#define FLASH_LATENCY_2 FLASH_ACR_LATENCY_2WS /*!< FLASH Two Latency cycles */
|
||||
#define FLASH_LATENCY_3 FLASH_ACR_LATENCY_3WS /*!< FLASH Three Latency cycles */
|
||||
#define FLASH_LATENCY_4 FLASH_ACR_LATENCY_4WS /*!< FLASH Four Latency cycles */
|
||||
#define FLASH_LATENCY_5 FLASH_ACR_LATENCY_5WS /*!< FLASH Five Latency cycles */
|
||||
#define FLASH_LATENCY_6 FLASH_ACR_LATENCY_6WS /*!< FLASH Six Latency cycles */
|
||||
#define FLASH_LATENCY_7 FLASH_ACR_LATENCY_7WS /*!< FLASH Seven Latency cycles */
|
||||
#define FLASH_LATENCY_8 FLASH_ACR_LATENCY_8WS /*!< FLASH Eight Latency cycles */
|
||||
#define FLASH_LATENCY_9 FLASH_ACR_LATENCY_9WS /*!< FLASH Nine Latency cycles */
|
||||
#define FLASH_LATENCY_10 FLASH_ACR_LATENCY_10WS /*!< FLASH Ten Latency cycles */
|
||||
#define FLASH_LATENCY_11 FLASH_ACR_LATENCY_11WS /*!< FLASH Eleven Latency cycles */
|
||||
#define FLASH_LATENCY_12 FLASH_ACR_LATENCY_12WS /*!< FLASH Twelve Latency cycles */
|
||||
#define FLASH_LATENCY_13 FLASH_ACR_LATENCY_13WS /*!< FLASH Thirteen Latency cycles */
|
||||
#define FLASH_LATENCY_14 FLASH_ACR_LATENCY_14WS /*!< FLASH Fourteen Latency cycles */
|
||||
#define FLASH_LATENCY_15 FLASH_ACR_LATENCY_15WS /*!< FLASH Fifteen Latency cycles */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#if defined (FLASH_OPTCR_nDBANK)
|
||||
/** @defgroup FLASHEx_Banks FLASH Banks
|
||||
* @{
|
||||
*/
|
||||
#define FLASH_BANK_1 ((uint32_t)0x01U) /*!< Bank 1 */
|
||||
#define FLASH_BANK_2 ((uint32_t)0x02U) /*!< Bank 2 */
|
||||
#define FLASH_BANK_BOTH ((uint32_t)(FLASH_BANK_1 | FLASH_BANK_2)) /*!< Bank1 and Bank2 */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#endif /* FLASH_OPTCR_nDBANK */
|
||||
|
||||
/** @defgroup FLASHEx_MassErase_bit FLASH Mass Erase bit
|
||||
* @{
|
||||
*/
|
||||
#if defined (FLASH_OPTCR_nDBANK)
|
||||
#define FLASH_MER_BIT (FLASH_CR_MER1 | FLASH_CR_MER2) /*!< 2 MER bits */
|
||||
#else
|
||||
#define FLASH_MER_BIT (FLASH_CR_MER) /*!< only 1 MER bit */
|
||||
#endif /* FLASH_OPTCR_nDBANK */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FLASHEx_Sectors FLASH Sectors
|
||||
* @{
|
||||
*/
|
||||
#if (FLASH_SECTOR_TOTAL == 24)
|
||||
#define FLASH_SECTOR_8 ((uint32_t)8U) /*!< Sector Number 8 */
|
||||
#define FLASH_SECTOR_9 ((uint32_t)9U) /*!< Sector Number 9 */
|
||||
#define FLASH_SECTOR_10 ((uint32_t)10U) /*!< Sector Number 10 */
|
||||
#define FLASH_SECTOR_11 ((uint32_t)11U) /*!< Sector Number 11 */
|
||||
#define FLASH_SECTOR_12 ((uint32_t)12U) /*!< Sector Number 12 */
|
||||
#define FLASH_SECTOR_13 ((uint32_t)13U) /*!< Sector Number 13 */
|
||||
#define FLASH_SECTOR_14 ((uint32_t)14U) /*!< Sector Number 14 */
|
||||
#define FLASH_SECTOR_15 ((uint32_t)15U) /*!< Sector Number 15 */
|
||||
#define FLASH_SECTOR_16 ((uint32_t)16U) /*!< Sector Number 16 */
|
||||
#define FLASH_SECTOR_17 ((uint32_t)17U) /*!< Sector Number 17 */
|
||||
#define FLASH_SECTOR_18 ((uint32_t)18U) /*!< Sector Number 18 */
|
||||
#define FLASH_SECTOR_19 ((uint32_t)19U) /*!< Sector Number 19 */
|
||||
#define FLASH_SECTOR_20 ((uint32_t)20U) /*!< Sector Number 20 */
|
||||
#define FLASH_SECTOR_21 ((uint32_t)21U) /*!< Sector Number 21 */
|
||||
#define FLASH_SECTOR_22 ((uint32_t)22U) /*!< Sector Number 22 */
|
||||
#define FLASH_SECTOR_23 ((uint32_t)23U) /*!< Sector Number 23 */
|
||||
#endif /* FLASH_SECTOR_TOTAL == 24 */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#if (FLASH_SECTOR_TOTAL == 24)
|
||||
/** @defgroup FLASHEx_Option_Bytes_Write_Protection FLASH Option Bytes Write Protection
|
||||
* @note For Single Bank mode, use OB_WRP_SECTOR_x defines: In fact, in FLASH_OPTCR register,
|
||||
* nWRP[11:0] bits contain the value of the write-protection option bytes for sectors 0 to 11.
|
||||
* For Dual Bank mode, use OB_WRP_DB_SECTOR_x defines: In fact, in FLASH_OPTCR register,
|
||||
* nWRP[11:0] bits are divided on two groups, one group dedicated for bank 1 and
|
||||
* a second one dedicated for bank 2 (nWRP[i] activates Write protection on sector 2*i and 2*i+1).
|
||||
* This behavior is applicable only for STM32F76xxx / STM32F77xxx devices.
|
||||
* @{
|
||||
*/
|
||||
/* Single Bank Sectors */
|
||||
#define OB_WRP_SECTOR_0 ((uint32_t)0x00010000U) /*!< Write protection of Single Bank Sector0 */
|
||||
#define OB_WRP_SECTOR_1 ((uint32_t)0x00020000U) /*!< Write protection of Single Bank Sector1 */
|
||||
#define OB_WRP_SECTOR_2 ((uint32_t)0x00040000U) /*!< Write protection of Single Bank Sector2 */
|
||||
#define OB_WRP_SECTOR_3 ((uint32_t)0x00080000U) /*!< Write protection of Single Bank Sector3 */
|
||||
#define OB_WRP_SECTOR_4 ((uint32_t)0x00100000U) /*!< Write protection of Single Bank Sector4 */
|
||||
#define OB_WRP_SECTOR_5 ((uint32_t)0x00200000U) /*!< Write protection of Single Bank Sector5 */
|
||||
#define OB_WRP_SECTOR_6 ((uint32_t)0x00400000U) /*!< Write protection of Single Bank Sector6 */
|
||||
#define OB_WRP_SECTOR_7 ((uint32_t)0x00800000U) /*!< Write protection of Single Bank Sector7 */
|
||||
#define OB_WRP_SECTOR_8 ((uint32_t)0x01000000U) /*!< Write protection of Single Bank Sector8 */
|
||||
#define OB_WRP_SECTOR_9 ((uint32_t)0x02000000U) /*!< Write protection of Single Bank Sector9 */
|
||||
#define OB_WRP_SECTOR_10 ((uint32_t)0x04000000U) /*!< Write protection of Single Bank Sector10 */
|
||||
#define OB_WRP_SECTOR_11 ((uint32_t)0x08000000U) /*!< Write protection of Single Bank Sector11 */
|
||||
#define OB_WRP_SECTOR_All ((uint32_t)0x0FFF0000U) /*!< Write protection of all Sectors for Single Bank Flash */
|
||||
|
||||
/* Dual Bank Sectors */
|
||||
#define OB_WRP_DB_SECTOR_0 ((uint32_t)0x00010000U) /*!< Write protection of Dual Bank Sector0 */
|
||||
#define OB_WRP_DB_SECTOR_1 ((uint32_t)0x00010000U) /*!< Write protection of Dual Bank Sector1 */
|
||||
#define OB_WRP_DB_SECTOR_2 ((uint32_t)0x00020000U) /*!< Write protection of Dual Bank Sector2 */
|
||||
#define OB_WRP_DB_SECTOR_3 ((uint32_t)0x00020000U) /*!< Write protection of Dual Bank Sector3 */
|
||||
#define OB_WRP_DB_SECTOR_4 ((uint32_t)0x00040000U) /*!< Write protection of Dual Bank Sector4 */
|
||||
#define OB_WRP_DB_SECTOR_5 ((uint32_t)0x00040000U) /*!< Write protection of Dual Bank Sector5 */
|
||||
#define OB_WRP_DB_SECTOR_6 ((uint32_t)0x00080000U) /*!< Write protection of Dual Bank Sector6 */
|
||||
#define OB_WRP_DB_SECTOR_7 ((uint32_t)0x00080000U) /*!< Write protection of Dual Bank Sector7 */
|
||||
#define OB_WRP_DB_SECTOR_8 ((uint32_t)0x00100000U) /*!< Write protection of Dual Bank Sector8 */
|
||||
#define OB_WRP_DB_SECTOR_9 ((uint32_t)0x00100000U) /*!< Write protection of Dual Bank Sector9 */
|
||||
#define OB_WRP_DB_SECTOR_10 ((uint32_t)0x00200000U) /*!< Write protection of Dual Bank Sector10 */
|
||||
#define OB_WRP_DB_SECTOR_11 ((uint32_t)0x00200000U) /*!< Write protection of Dual Bank Sector11 */
|
||||
#define OB_WRP_DB_SECTOR_12 ((uint32_t)0x00400000U) /*!< Write protection of Dual Bank Sector12 */
|
||||
#define OB_WRP_DB_SECTOR_13 ((uint32_t)0x00400000U) /*!< Write protection of Dual Bank Sector13 */
|
||||
#define OB_WRP_DB_SECTOR_14 ((uint32_t)0x00800000U) /*!< Write protection of Dual Bank Sector14 */
|
||||
#define OB_WRP_DB_SECTOR_15 ((uint32_t)0x00800000U) /*!< Write protection of Dual Bank Sector15 */
|
||||
#define OB_WRP_DB_SECTOR_16 ((uint32_t)0x01000000U) /*!< Write protection of Dual Bank Sector16 */
|
||||
#define OB_WRP_DB_SECTOR_17 ((uint32_t)0x01000000U) /*!< Write protection of Dual Bank Sector17 */
|
||||
#define OB_WRP_DB_SECTOR_18 ((uint32_t)0x02000000U) /*!< Write protection of Dual Bank Sector18 */
|
||||
#define OB_WRP_DB_SECTOR_19 ((uint32_t)0x02000000U) /*!< Write protection of Dual Bank Sector19 */
|
||||
#define OB_WRP_DB_SECTOR_20 ((uint32_t)0x04000000U) /*!< Write protection of Dual Bank Sector20 */
|
||||
#define OB_WRP_DB_SECTOR_21 ((uint32_t)0x04000000U) /*!< Write protection of Dual Bank Sector21 */
|
||||
#define OB_WRP_DB_SECTOR_22 ((uint32_t)0x08000000U) /*!< Write protection of Dual Bank Sector22 */
|
||||
#define OB_WRP_DB_SECTOR_23 ((uint32_t)0x08000000U) /*!< Write protection of Dual Bank Sector23 */
|
||||
#define OB_WRP_DB_SECTOR_All ((uint32_t)0x0FFF0000U) /*!< Write protection of all Sectors for Dual Bank Flash */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#endif /* FLASH_SECTOR_TOTAL == 24 */
|
||||
|
||||
#if (FLASH_SECTOR_TOTAL == 8)
|
||||
/** @defgroup FLASHEx_Option_Bytes_Write_Protection FLASH Option Bytes Write Protection
|
||||
* @{
|
||||
*/
|
||||
#define OB_WRP_SECTOR_0 ((uint32_t)0x00010000U) /*!< Write protection of Sector0 */
|
||||
#define OB_WRP_SECTOR_1 ((uint32_t)0x00020000U) /*!< Write protection of Sector1 */
|
||||
#define OB_WRP_SECTOR_2 ((uint32_t)0x00040000U) /*!< Write protection of Sector2 */
|
||||
#define OB_WRP_SECTOR_3 ((uint32_t)0x00080000U) /*!< Write protection of Sector3 */
|
||||
#define OB_WRP_SECTOR_4 ((uint32_t)0x00100000U) /*!< Write protection of Sector4 */
|
||||
#define OB_WRP_SECTOR_5 ((uint32_t)0x00200000U) /*!< Write protection of Sector5 */
|
||||
#define OB_WRP_SECTOR_6 ((uint32_t)0x00400000U) /*!< Write protection of Sector6 */
|
||||
#define OB_WRP_SECTOR_7 ((uint32_t)0x00800000U) /*!< Write protection of Sector7 */
|
||||
#define OB_WRP_SECTOR_All ((uint32_t)0x00FF0000U) /*!< Write protection of all Sectors */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#endif /* FLASH_SECTOR_TOTAL == 8 */
|
||||
|
||||
#if (FLASH_SECTOR_TOTAL == 4)
|
||||
/** @defgroup FLASHEx_Option_Bytes_Write_Protection FLASH Option Bytes Write Protection
|
||||
* @{
|
||||
*/
|
||||
#define OB_WRP_SECTOR_0 ((uint32_t)0x00010000U) /*!< Write protection of Sector0 */
|
||||
#define OB_WRP_SECTOR_1 ((uint32_t)0x00020000U) /*!< Write protection of Sector1 */
|
||||
#define OB_WRP_SECTOR_2 ((uint32_t)0x00040000U) /*!< Write protection of Sector2 */
|
||||
#define OB_WRP_SECTOR_3 ((uint32_t)0x00080000U) /*!< Write protection of Sector3 */
|
||||
#define OB_WRP_SECTOR_All ((uint32_t)0x000F0000U) /*!< Write protection of all Sectors */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#endif /* FLASH_SECTOR_TOTAL == 4 */
|
||||
|
||||
#if (FLASH_SECTOR_TOTAL == 2)
|
||||
/** @defgroup FLASHEx_Option_Bytes_Write_Protection FLASH Option Bytes Write Protection
|
||||
* @{
|
||||
*/
|
||||
#define OB_WRP_SECTOR_0 ((uint32_t)0x00010000U) /*!< Write protection of Sector0 */
|
||||
#define OB_WRP_SECTOR_1 ((uint32_t)0x00020000U) /*!< Write protection of Sector1 */
|
||||
#define OB_WRP_SECTOR_All ((uint32_t)0x00030000U) /*!< Write protection of all Sectors */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#endif /* FLASH_SECTOR_TOTAL == 2 */
|
||||
|
||||
#if defined (FLASH_OPTCR2_PCROP)
|
||||
#if (FLASH_SECTOR_TOTAL == 8)
|
||||
/** @defgroup FLASHEx_Option_Bytes_PCROP_Sectors FLASH Option Bytes PCROP Sectors
|
||||
* @{
|
||||
*/
|
||||
#define OB_PCROP_SECTOR_0 ((uint32_t)0x00000001U) /*!< PC Readout protection of Sector0 */
|
||||
#define OB_PCROP_SECTOR_1 ((uint32_t)0x00000002U) /*!< PC Readout protection of Sector1 */
|
||||
#define OB_PCROP_SECTOR_2 ((uint32_t)0x00000004U) /*!< PC Readout protection of Sector2 */
|
||||
#define OB_PCROP_SECTOR_3 ((uint32_t)0x00000008U) /*!< PC Readout protection of Sector3 */
|
||||
#define OB_PCROP_SECTOR_4 ((uint32_t)0x00000010U) /*!< PC Readout protection of Sector4 */
|
||||
#define OB_PCROP_SECTOR_5 ((uint32_t)0x00000020U) /*!< PC Readout protection of Sector5 */
|
||||
#define OB_PCROP_SECTOR_6 ((uint32_t)0x00000040U) /*!< PC Readout protection of Sector6 */
|
||||
#define OB_PCROP_SECTOR_7 ((uint32_t)0x00000080U) /*!< PC Readout protection of Sector7 */
|
||||
#define OB_PCROP_SECTOR_All ((uint32_t)0x000000FFU) /*!< PC Readout protection of all Sectors */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#endif /* FLASH_SECTOR_TOTAL == 8 */
|
||||
|
||||
#if (FLASH_SECTOR_TOTAL == 4)
|
||||
/** @defgroup FLASHEx_Option_Bytes_PCROP_Sectors FLASH Option Bytes PCROP Sectors
|
||||
* @{
|
||||
*/
|
||||
#define OB_PCROP_SECTOR_0 ((uint32_t)0x00000001U) /*!< PC Readout protection of Sector0 */
|
||||
#define OB_PCROP_SECTOR_1 ((uint32_t)0x00000002U) /*!< PC Readout protection of Sector1 */
|
||||
#define OB_PCROP_SECTOR_2 ((uint32_t)0x00000004U) /*!< PC Readout protection of Sector2 */
|
||||
#define OB_PCROP_SECTOR_3 ((uint32_t)0x00000008U) /*!< PC Readout protection of Sector3 */
|
||||
#define OB_PCROP_SECTOR_All ((uint32_t)0x0000000FU) /*!< PC Readout protection of all Sectors */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#endif /* FLASH_SECTOR_TOTAL == 4 */
|
||||
|
||||
/** @defgroup FLASHEx_Option_Bytes_PCROP_RDP FLASH Option Bytes PCROP_RDP Bit
|
||||
* @{
|
||||
*/
|
||||
#define OB_PCROP_RDP_ENABLE ((uint32_t)0x80000000U) /*!< PCROP_RDP Enable */
|
||||
#define OB_PCROP_RDP_DISABLE ((uint32_t)0x00000000U) /*!< PCROP_RDP Disable */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#endif /* FLASH_OPTCR2_PCROP */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/** @defgroup FLASH_Exported_Macros FLASH Exported Macros
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @brief Calculate the FLASH Boot Base Address (BOOT_ADD0 or BOOT_ADD1)
|
||||
* @note Returned value BOOT_ADDx[15:0] corresponds to boot address [29:14].
|
||||
* @param __ADDRESS__ FLASH Boot Address (in the range 0x0000 0000 to 0x2004 FFFF with a granularity of 16KB)
|
||||
* @retval The FLASH Boot Base Address
|
||||
*/
|
||||
#define __HAL_FLASH_CALC_BOOT_BASE_ADR(__ADDRESS__) ((__ADDRESS__) >> 14)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup FLASHEx_Exported_Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup FLASHEx_Exported_Functions_Group1
|
||||
* @{
|
||||
*/
|
||||
/* Extension Program operation functions *************************************/
|
||||
HAL_StatusTypeDef HAL_FLASHEx_Erase(FLASH_EraseInitTypeDef *pEraseInit, uint32_t *SectorError);
|
||||
HAL_StatusTypeDef HAL_FLASHEx_Erase_IT(FLASH_EraseInitTypeDef *pEraseInit);
|
||||
HAL_StatusTypeDef HAL_FLASHEx_OBProgram(FLASH_OBProgramInitTypeDef *pOBInit);
|
||||
void HAL_FLASHEx_OBGetConfig(FLASH_OBProgramInitTypeDef *pOBInit);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup FLASHEx_Private_Macros FLASH Private Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup FLASHEx_IS_FLASH_Definitions FLASH Private macros to check input parameters
|
||||
* @{
|
||||
*/
|
||||
|
||||
#define IS_FLASH_TYPEERASE(VALUE)(((VALUE) == FLASH_TYPEERASE_SECTORS) || \
|
||||
((VALUE) == FLASH_TYPEERASE_MASSERASE))
|
||||
|
||||
#define IS_VOLTAGERANGE(RANGE)(((RANGE) == FLASH_VOLTAGE_RANGE_1) || \
|
||||
((RANGE) == FLASH_VOLTAGE_RANGE_2) || \
|
||||
((RANGE) == FLASH_VOLTAGE_RANGE_3) || \
|
||||
((RANGE) == FLASH_VOLTAGE_RANGE_4))
|
||||
|
||||
#define IS_WRPSTATE(VALUE)(((VALUE) == OB_WRPSTATE_DISABLE) || \
|
||||
((VALUE) == OB_WRPSTATE_ENABLE))
|
||||
|
||||
#if defined (FLASH_OPTCR2_PCROP)
|
||||
#define IS_OPTIONBYTE(VALUE)(((VALUE) <= (OPTIONBYTE_WRP | OPTIONBYTE_RDP | OPTIONBYTE_USER |\
|
||||
OPTIONBYTE_BOR | OPTIONBYTE_BOOTADDR_0 | OPTIONBYTE_BOOTADDR_1 |\
|
||||
OPTIONBYTE_PCROP | OPTIONBYTE_PCROP_RDP)))
|
||||
#else
|
||||
#define IS_OPTIONBYTE(VALUE)(((VALUE) <= (OPTIONBYTE_WRP | OPTIONBYTE_RDP | OPTIONBYTE_USER |\
|
||||
OPTIONBYTE_BOR | OPTIONBYTE_BOOTADDR_0 | OPTIONBYTE_BOOTADDR_1)))
|
||||
#endif /* FLASH_OPTCR2_PCROP */
|
||||
|
||||
#define IS_OB_BOOT_ADDRESS(ADDRESS) ((ADDRESS) <= 0x8013)
|
||||
|
||||
#define IS_OB_RDP_LEVEL(LEVEL) (((LEVEL) == OB_RDP_LEVEL_0) ||\
|
||||
((LEVEL) == OB_RDP_LEVEL_1) ||\
|
||||
((LEVEL) == OB_RDP_LEVEL_2))
|
||||
|
||||
#define IS_OB_WWDG_SOURCE(SOURCE) (((SOURCE) == OB_WWDG_SW) || ((SOURCE) == OB_WWDG_HW))
|
||||
|
||||
#define IS_OB_IWDG_SOURCE(SOURCE) (((SOURCE) == OB_IWDG_SW) || ((SOURCE) == OB_IWDG_HW))
|
||||
|
||||
#define IS_OB_STOP_SOURCE(SOURCE) (((SOURCE) == OB_STOP_NO_RST) || ((SOURCE) == OB_STOP_RST))
|
||||
|
||||
#define IS_OB_STDBY_SOURCE(SOURCE) (((SOURCE) == OB_STDBY_NO_RST) || ((SOURCE) == OB_STDBY_RST))
|
||||
|
||||
#define IS_OB_IWDG_STOP_FREEZE(FREEZE) (((FREEZE) == OB_IWDG_STOP_FREEZE) || ((FREEZE) == OB_IWDG_STOP_ACTIVE))
|
||||
|
||||
#define IS_OB_IWDG_STDBY_FREEZE(FREEZE) (((FREEZE) == OB_IWDG_STDBY_FREEZE) || ((FREEZE) == OB_IWDG_STDBY_ACTIVE))
|
||||
|
||||
#define IS_OB_BOR_LEVEL(LEVEL) (((LEVEL) == OB_BOR_LEVEL1) || ((LEVEL) == OB_BOR_LEVEL2) ||\
|
||||
((LEVEL) == OB_BOR_LEVEL3) || ((LEVEL) == OB_BOR_OFF))
|
||||
|
||||
#define IS_FLASH_LATENCY(LATENCY) (((LATENCY) == FLASH_LATENCY_0) || \
|
||||
((LATENCY) == FLASH_LATENCY_1) || \
|
||||
((LATENCY) == FLASH_LATENCY_2) || \
|
||||
((LATENCY) == FLASH_LATENCY_3) || \
|
||||
((LATENCY) == FLASH_LATENCY_4) || \
|
||||
((LATENCY) == FLASH_LATENCY_5) || \
|
||||
((LATENCY) == FLASH_LATENCY_6) || \
|
||||
((LATENCY) == FLASH_LATENCY_7) || \
|
||||
((LATENCY) == FLASH_LATENCY_8) || \
|
||||
((LATENCY) == FLASH_LATENCY_9) || \
|
||||
((LATENCY) == FLASH_LATENCY_10) || \
|
||||
((LATENCY) == FLASH_LATENCY_11) || \
|
||||
((LATENCY) == FLASH_LATENCY_12) || \
|
||||
((LATENCY) == FLASH_LATENCY_13) || \
|
||||
((LATENCY) == FLASH_LATENCY_14) || \
|
||||
((LATENCY) == FLASH_LATENCY_15))
|
||||
|
||||
#define IS_FLASH_ADDRESS(ADDRESS) ((((ADDRESS) >= FLASH_BASE) && ((ADDRESS) <= FLASH_END)) || \
|
||||
(((ADDRESS) >= FLASH_OTP_BASE) && ((ADDRESS) <= FLASH_OTP_END)))
|
||||
#define IS_FLASH_NBSECTORS(NBSECTORS) (((NBSECTORS) != 0U) && ((NBSECTORS) <= FLASH_SECTOR_TOTAL))
|
||||
|
||||
#if (FLASH_SECTOR_TOTAL == 8)
|
||||
#define IS_FLASH_SECTOR(SECTOR) (((SECTOR) == FLASH_SECTOR_0) || ((SECTOR) == FLASH_SECTOR_1) ||\
|
||||
((SECTOR) == FLASH_SECTOR_2) || ((SECTOR) == FLASH_SECTOR_3) ||\
|
||||
((SECTOR) == FLASH_SECTOR_4) || ((SECTOR) == FLASH_SECTOR_5) ||\
|
||||
((SECTOR) == FLASH_SECTOR_6) || ((SECTOR) == FLASH_SECTOR_7))
|
||||
|
||||
#define IS_OB_WRP_SECTOR(SECTOR) ((((SECTOR) & 0xFF00FFFFU) == 0x00000000U) && ((SECTOR) != 0x00000000U))
|
||||
#endif /* FLASH_SECTOR_TOTAL == 8 */
|
||||
|
||||
#if (FLASH_SECTOR_TOTAL == 24)
|
||||
#define IS_FLASH_SECTOR(SECTOR) (((SECTOR) == FLASH_SECTOR_0) || ((SECTOR) == FLASH_SECTOR_1) ||\
|
||||
((SECTOR) == FLASH_SECTOR_2) || ((SECTOR) == FLASH_SECTOR_3) ||\
|
||||
((SECTOR) == FLASH_SECTOR_4) || ((SECTOR) == FLASH_SECTOR_5) ||\
|
||||
((SECTOR) == FLASH_SECTOR_6) || ((SECTOR) == FLASH_SECTOR_7) ||\
|
||||
((SECTOR) == FLASH_SECTOR_8) || ((SECTOR) == FLASH_SECTOR_9) ||\
|
||||
((SECTOR) == FLASH_SECTOR_10) || ((SECTOR) == FLASH_SECTOR_11) ||\
|
||||
((SECTOR) == FLASH_SECTOR_12) || ((SECTOR) == FLASH_SECTOR_13) ||\
|
||||
((SECTOR) == FLASH_SECTOR_14) || ((SECTOR) == FLASH_SECTOR_15) ||\
|
||||
((SECTOR) == FLASH_SECTOR_16) || ((SECTOR) == FLASH_SECTOR_17) ||\
|
||||
((SECTOR) == FLASH_SECTOR_18) || ((SECTOR) == FLASH_SECTOR_19) ||\
|
||||
((SECTOR) == FLASH_SECTOR_20) || ((SECTOR) == FLASH_SECTOR_21) ||\
|
||||
((SECTOR) == FLASH_SECTOR_22) || ((SECTOR) == FLASH_SECTOR_23))
|
||||
|
||||
#define IS_OB_WRP_SECTOR(SECTOR) ((((SECTOR) & 0xF000FFFFU) == 0x00000000U) && ((SECTOR) != 0x00000000U))
|
||||
#endif /* FLASH_SECTOR_TOTAL == 24 */
|
||||
|
||||
#if (FLASH_SECTOR_TOTAL == 4)
|
||||
#define IS_FLASH_SECTOR(SECTOR) (((SECTOR) == FLASH_SECTOR_0) || ((SECTOR) == FLASH_SECTOR_1) ||\
|
||||
((SECTOR) == FLASH_SECTOR_2) || ((SECTOR) == FLASH_SECTOR_3))
|
||||
|
||||
#define IS_OB_WRP_SECTOR(SECTOR) ((((SECTOR) & 0xFFF0FFFFU) == 0x00000000U) && ((SECTOR) != 0x00000000U))
|
||||
#endif /* FLASH_SECTOR_TOTAL == 4 */
|
||||
|
||||
#if (FLASH_SECTOR_TOTAL == 2)
|
||||
#define IS_FLASH_SECTOR(SECTOR) (((SECTOR) == FLASH_SECTOR_0) || ((SECTOR) == FLASH_SECTOR_1))
|
||||
|
||||
#define IS_OB_WRP_SECTOR(SECTOR) ((((SECTOR) & 0xFFFCFFFFU) == 0x00000000U) && ((SECTOR) != 0x00000000U))
|
||||
#endif /* FLASH_SECTOR_TOTAL == 2 */
|
||||
|
||||
#if defined (FLASH_OPTCR_nDBANK)
|
||||
#define IS_OB_NDBANK(VALUE) (((VALUE) == OB_NDBANK_SINGLE_BANK) || \
|
||||
((VALUE) == OB_NDBANK_DUAL_BANK))
|
||||
|
||||
#define IS_FLASH_BANK(BANK) (((BANK) == FLASH_BANK_1) || \
|
||||
((BANK) == FLASH_BANK_2) || \
|
||||
((BANK) == FLASH_BANK_BOTH))
|
||||
#endif /* FLASH_OPTCR_nDBANK */
|
||||
|
||||
#if defined (FLASH_OPTCR_nDBOOT)
|
||||
#define IS_OB_NDBOOT(VALUE) (((VALUE) == OB_DUAL_BOOT_DISABLE) || \
|
||||
((VALUE) == OB_DUAL_BOOT_ENABLE))
|
||||
#endif /* FLASH_OPTCR_nDBOOT */
|
||||
|
||||
#if defined (FLASH_OPTCR2_PCROP)
|
||||
#define IS_OB_PCROP_SECTOR(SECTOR) (((SECTOR) & (uint32_t)0xFFFFFF00U) == 0x00000000U)
|
||||
#define IS_OB_PCROP_RDP_VALUE(VALUE) (((VALUE) == OB_PCROP_RDP_DISABLE) || \
|
||||
((VALUE) == OB_PCROP_RDP_ENABLE))
|
||||
#endif /* FLASH_OPTCR2_PCROP */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
/** @defgroup FLASHEx_Private_Functions FLASH Private Functions
|
||||
* @{
|
||||
*/
|
||||
void FLASH_Erase_Sector(uint32_t Sector, uint8_t VoltageRange);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32F7xx_HAL_FLASH_EX_H */
|
||||
|
||||
@@ -0,0 +1,323 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f7xx_hal_gpio.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of GPIO HAL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F7xx_HAL_GPIO_H
|
||||
#define __STM32F7xx_HAL_GPIO_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f7xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F7xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup GPIO
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/** @defgroup GPIO_Exported_Types GPIO Exported Types
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief GPIO Init structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t Pin; /*!< Specifies the GPIO pins to be configured.
|
||||
This parameter can be any value of @ref GPIO_pins_define */
|
||||
|
||||
uint32_t Mode; /*!< Specifies the operating mode for the selected pins.
|
||||
This parameter can be a value of @ref GPIO_mode_define */
|
||||
|
||||
uint32_t Pull; /*!< Specifies the Pull-up or Pull-Down activation for the selected pins.
|
||||
This parameter can be a value of @ref GPIO_pull_define */
|
||||
|
||||
uint32_t Speed; /*!< Specifies the speed for the selected pins.
|
||||
This parameter can be a value of @ref GPIO_speed_define */
|
||||
|
||||
uint32_t Alternate; /*!< Peripheral to be connected to the selected pins.
|
||||
This parameter can be a value of @ref GPIO_Alternate_function_selection */
|
||||
}GPIO_InitTypeDef;
|
||||
|
||||
/**
|
||||
* @brief GPIO Bit SET and Bit RESET enumeration
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
GPIO_PIN_RESET = 0,
|
||||
GPIO_PIN_SET
|
||||
}GPIO_PinState;
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
|
||||
/** @defgroup GPIO_Exported_Constants GPIO Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup GPIO_pins_define GPIO pins define
|
||||
* @{
|
||||
*/
|
||||
#define GPIO_PIN_0 ((uint16_t)0x0001U) /* Pin 0 selected */
|
||||
#define GPIO_PIN_1 ((uint16_t)0x0002U) /* Pin 1 selected */
|
||||
#define GPIO_PIN_2 ((uint16_t)0x0004U) /* Pin 2 selected */
|
||||
#define GPIO_PIN_3 ((uint16_t)0x0008U) /* Pin 3 selected */
|
||||
#define GPIO_PIN_4 ((uint16_t)0x0010U) /* Pin 4 selected */
|
||||
#define GPIO_PIN_5 ((uint16_t)0x0020U) /* Pin 5 selected */
|
||||
#define GPIO_PIN_6 ((uint16_t)0x0040U) /* Pin 6 selected */
|
||||
#define GPIO_PIN_7 ((uint16_t)0x0080U) /* Pin 7 selected */
|
||||
#define GPIO_PIN_8 ((uint16_t)0x0100U) /* Pin 8 selected */
|
||||
#define GPIO_PIN_9 ((uint16_t)0x0200U) /* Pin 9 selected */
|
||||
#define GPIO_PIN_10 ((uint16_t)0x0400U) /* Pin 10 selected */
|
||||
#define GPIO_PIN_11 ((uint16_t)0x0800U) /* Pin 11 selected */
|
||||
#define GPIO_PIN_12 ((uint16_t)0x1000U) /* Pin 12 selected */
|
||||
#define GPIO_PIN_13 ((uint16_t)0x2000U) /* Pin 13 selected */
|
||||
#define GPIO_PIN_14 ((uint16_t)0x4000U) /* Pin 14 selected */
|
||||
#define GPIO_PIN_15 ((uint16_t)0x8000U) /* Pin 15 selected */
|
||||
#define GPIO_PIN_All ((uint16_t)0xFFFFU) /* All pins selected */
|
||||
|
||||
#define GPIO_PIN_MASK ((uint32_t)0x0000FFFFU) /* PIN mask for assert test */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup GPIO_mode_define GPIO mode define
|
||||
* @brief GPIO Configuration Mode
|
||||
* Elements values convention: 0x00WX00YZ
|
||||
* - W : EXTI trigger detection on 3 bits
|
||||
* - X : EXTI mode (IT or Event) on 2 bits
|
||||
* - Y : Output type (Push Pull or Open Drain) on 1 bit
|
||||
* - Z : GPIO mode (Input, Output, Alternate or Analog) on 2 bits
|
||||
* @{
|
||||
*/
|
||||
#define GPIO_MODE_INPUT MODE_INPUT /*!< Input Floating Mode */
|
||||
#define GPIO_MODE_OUTPUT_PP (MODE_OUTPUT | OUTPUT_PP) /*!< Output Push Pull Mode */
|
||||
#define GPIO_MODE_OUTPUT_OD (MODE_OUTPUT | OUTPUT_OD) /*!< Output Open Drain Mode */
|
||||
#define GPIO_MODE_AF_PP (MODE_AF | OUTPUT_PP) /*!< Alternate Function Push Pull Mode */
|
||||
#define GPIO_MODE_AF_OD (MODE_AF | OUTPUT_OD) /*!< Alternate Function Open Drain Mode */
|
||||
|
||||
#define GPIO_MODE_ANALOG MODE_ANALOG /*!< Analog Mode */
|
||||
|
||||
#define GPIO_MODE_IT_RISING (MODE_INPUT | EXTI_IT | TRIGGER_RISING) /*!< External Interrupt Mode with Rising edge trigger detection */
|
||||
#define GPIO_MODE_IT_FALLING (MODE_INPUT | EXTI_IT | TRIGGER_FALLING) /*!< External Interrupt Mode with Falling edge trigger detection */
|
||||
#define GPIO_MODE_IT_RISING_FALLING (MODE_INPUT | EXTI_IT | TRIGGER_RISING | TRIGGER_FALLING) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
|
||||
|
||||
#define GPIO_MODE_EVT_RISING (MODE_INPUT | EXTI_EVT | TRIGGER_RISING) /*!< External Event Mode with Rising edge trigger detection */
|
||||
#define GPIO_MODE_EVT_FALLING (MODE_INPUT | EXTI_EVT | TRIGGER_FALLING) /*!< External Event Mode with Falling edge trigger detection */
|
||||
#define GPIO_MODE_EVT_RISING_FALLING (MODE_INPUT | EXTI_EVT | TRIGGER_RISING | TRIGGER_FALLING) /*!< External Event Mode with Rising/Falling edge trigger detection */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup GPIO_speed_define GPIO speed define
|
||||
* @brief GPIO Output Maximum frequency
|
||||
* @{
|
||||
*/
|
||||
#define GPIO_SPEED_FREQ_LOW ((uint32_t)0x00000000U) /*!< Low speed */
|
||||
#define GPIO_SPEED_FREQ_MEDIUM ((uint32_t)0x00000001U) /*!< Medium speed */
|
||||
#define GPIO_SPEED_FREQ_HIGH ((uint32_t)0x00000002U) /*!< Fast speed */
|
||||
#define GPIO_SPEED_FREQ_VERY_HIGH ((uint32_t)0x00000003U) /*!< High speed */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup GPIO_pull_define GPIO pull define
|
||||
* @brief GPIO Pull-Up or Pull-Down Activation
|
||||
* @{
|
||||
*/
|
||||
#define GPIO_NOPULL ((uint32_t)0x00000000U) /*!< No Pull-up or Pull-down activation */
|
||||
#define GPIO_PULLUP ((uint32_t)0x00000001U) /*!< Pull-up activation */
|
||||
#define GPIO_PULLDOWN ((uint32_t)0x00000002U) /*!< Pull-down activation */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/** @defgroup GPIO_Exported_Macros GPIO Exported Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Checks whether the specified EXTI line flag is set or not.
|
||||
* @param __EXTI_LINE__ specifies the EXTI line flag to check.
|
||||
* This parameter can be GPIO_PIN_x where x can be(0..15)
|
||||
* @retval The new state of __EXTI_LINE__ (SET or RESET).
|
||||
*/
|
||||
#define __HAL_GPIO_EXTI_GET_FLAG(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__))
|
||||
|
||||
/**
|
||||
* @brief Clears the EXTI's line pending flags.
|
||||
* @param __EXTI_LINE__ specifies the EXTI lines flags to clear.
|
||||
* This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_GPIO_EXTI_CLEAR_FLAG(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__))
|
||||
|
||||
/**
|
||||
* @brief Checks whether the specified EXTI line is asserted or not.
|
||||
* @param __EXTI_LINE__ specifies the EXTI line to check.
|
||||
* This parameter can be GPIO_PIN_x where x can be(0..15)
|
||||
* @retval The new state of __EXTI_LINE__ (SET or RESET).
|
||||
*/
|
||||
#define __HAL_GPIO_EXTI_GET_IT(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__))
|
||||
|
||||
/**
|
||||
* @brief Clears the EXTI's line pending bits.
|
||||
* @param __EXTI_LINE__ specifies the EXTI lines to clear.
|
||||
* This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_GPIO_EXTI_CLEAR_IT(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__))
|
||||
|
||||
/**
|
||||
* @brief Generates a Software interrupt on selected EXTI line.
|
||||
* @param __EXTI_LINE__ specifies the EXTI line to check.
|
||||
* This parameter can be GPIO_PIN_x where x can be(0..15)
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_GPIO_EXTI_GENERATE_SWIT(__EXTI_LINE__) (EXTI->SWIER |= (__EXTI_LINE__))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Include GPIO HAL Extension module */
|
||||
#include "stm32f7xx_hal_gpio_ex.h"
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup GPIO_Exported_Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup GPIO_Exported_Functions_Group1
|
||||
* @{
|
||||
*/
|
||||
/* Initialization and de-initialization functions *****************************/
|
||||
void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init);
|
||||
void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup GPIO_Exported_Functions_Group2
|
||||
* @{
|
||||
*/
|
||||
/* IO operation functions *****************************************************/
|
||||
GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
|
||||
void HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState);
|
||||
void HAL_GPIO_TogglePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
|
||||
HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
|
||||
void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin);
|
||||
void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/** @defgroup GPIO_Private_Constants GPIO Private Constants
|
||||
* @{
|
||||
*/
|
||||
#define GPIO_MODE_Pos 0U
|
||||
#define GPIO_MODE (0x3UL << GPIO_MODE_Pos)
|
||||
#define MODE_INPUT (0x0UL << GPIO_MODE_Pos)
|
||||
#define MODE_OUTPUT (0x1UL << GPIO_MODE_Pos)
|
||||
#define MODE_AF (0x2UL << GPIO_MODE_Pos)
|
||||
#define MODE_ANALOG (0x3UL << GPIO_MODE_Pos)
|
||||
#define OUTPUT_TYPE_Pos 4U
|
||||
#define OUTPUT_TYPE (0x1UL << OUTPUT_TYPE_Pos)
|
||||
#define OUTPUT_PP (0x0UL << OUTPUT_TYPE_Pos)
|
||||
#define OUTPUT_OD (0x1UL << OUTPUT_TYPE_Pos)
|
||||
#define EXTI_MODE_Pos 16U
|
||||
#define EXTI_MODE (0x3UL << EXTI_MODE_Pos)
|
||||
#define EXTI_IT (0x1UL << EXTI_MODE_Pos)
|
||||
#define EXTI_EVT (0x2UL << EXTI_MODE_Pos)
|
||||
#define TRIGGER_MODE_Pos 20U
|
||||
#define TRIGGER_MODE (0x7UL << TRIGGER_MODE_Pos)
|
||||
#define TRIGGER_RISING (0x1UL << TRIGGER_MODE_Pos)
|
||||
#define TRIGGER_FALLING (0x2UL << TRIGGER_MODE_Pos)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup GPIO_Private_Macros GPIO Private Macros
|
||||
* @{
|
||||
*/
|
||||
#define IS_GPIO_PIN_ACTION(ACTION) (((ACTION) == GPIO_PIN_RESET) || ((ACTION) == GPIO_PIN_SET))
|
||||
#define IS_GPIO_PIN(__PIN__) ((((uint32_t)(__PIN__) & GPIO_PIN_MASK) != 0x00U))
|
||||
#define IS_GPIO_MODE(MODE) (((MODE) == GPIO_MODE_INPUT) ||\
|
||||
((MODE) == GPIO_MODE_OUTPUT_PP) ||\
|
||||
((MODE) == GPIO_MODE_OUTPUT_OD) ||\
|
||||
((MODE) == GPIO_MODE_AF_PP) ||\
|
||||
((MODE) == GPIO_MODE_AF_OD) ||\
|
||||
((MODE) == GPIO_MODE_IT_RISING) ||\
|
||||
((MODE) == GPIO_MODE_IT_FALLING) ||\
|
||||
((MODE) == GPIO_MODE_IT_RISING_FALLING) ||\
|
||||
((MODE) == GPIO_MODE_EVT_RISING) ||\
|
||||
((MODE) == GPIO_MODE_EVT_FALLING) ||\
|
||||
((MODE) == GPIO_MODE_EVT_RISING_FALLING) ||\
|
||||
((MODE) == GPIO_MODE_ANALOG))
|
||||
#define IS_GPIO_SPEED(SPEED) (((SPEED) == GPIO_SPEED_LOW) || ((SPEED) == GPIO_SPEED_MEDIUM) || \
|
||||
((SPEED) == GPIO_SPEED_FAST) || ((SPEED) == GPIO_SPEED_HIGH))
|
||||
#define IS_GPIO_PULL(PULL) (((PULL) == GPIO_NOPULL) || ((PULL) == GPIO_PULLUP) || \
|
||||
((PULL) == GPIO_PULLDOWN))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
/** @defgroup GPIO_Private_Functions GPIO Private Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32F7xx_HAL_GPIO_H */
|
||||
|
||||
@@ -0,0 +1,656 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f7xx_hal_gpio_ex.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of GPIO HAL Extension module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F7xx_HAL_GPIO_EX_H
|
||||
#define __STM32F7xx_HAL_GPIO_EX_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f7xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F7xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup GPIOEx GPIOEx
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup GPIOEx_Exported_Constants GPIO Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup GPIO_Alternate_function_selection GPIO Alternate Function Selection
|
||||
* @{
|
||||
*/
|
||||
/*--------------- STM32F74xxx/STM32F75xxx/STM32F76xxx/STM32F77xxx -------------*/
|
||||
#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) || defined (STM32F767xx) ||\
|
||||
defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) || defined (STM32F750xx)
|
||||
/**
|
||||
* @brief AF 0 selection
|
||||
*/
|
||||
#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00U) /* RTC_50Hz Alternate Function mapping */
|
||||
#define GPIO_AF0_MCO ((uint8_t)0x00U) /* MCO (MCO1 and MCO2) Alternate Function mapping */
|
||||
#define GPIO_AF0_SWJ ((uint8_t)0x00U) /* SWJ (SWD and JTAG) Alternate Function mapping */
|
||||
#define GPIO_AF0_TRACE ((uint8_t)0x00U) /* TRACE Alternate Function mapping */
|
||||
|
||||
/**
|
||||
* @brief AF 1 selection
|
||||
*/
|
||||
#define GPIO_AF1_TIM1 ((uint8_t)0x01U) /* TIM1 Alternate Function mapping */
|
||||
#define GPIO_AF1_TIM2 ((uint8_t)0x01U) /* TIM2 Alternate Function mapping */
|
||||
#if defined (STM32F765xx) || defined(STM32F767xx) || defined(STM32F769xx) || defined(STM32F777xx) || defined(STM32F779xx)
|
||||
#define GPIO_AF1_UART5 ((uint8_t)0x01U) /* UART5 Alternate Function mapping */
|
||||
#define GPIO_AF1_I2C4 ((uint8_t)0x01U) /* I2C4 Alternate Function mapping */
|
||||
#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
|
||||
|
||||
/**
|
||||
* @brief AF 2 selection
|
||||
*/
|
||||
#define GPIO_AF2_TIM3 ((uint8_t)0x02U) /* TIM3 Alternate Function mapping */
|
||||
#define GPIO_AF2_TIM4 ((uint8_t)0x02U) /* TIM4 Alternate Function mapping */
|
||||
#define GPIO_AF2_TIM5 ((uint8_t)0x02U) /* TIM5 Alternate Function mapping */
|
||||
|
||||
/**
|
||||
* @brief AF 3 selection
|
||||
*/
|
||||
#define GPIO_AF3_TIM8 ((uint8_t)0x03U) /* TIM8 Alternate Function mapping */
|
||||
#define GPIO_AF3_TIM9 ((uint8_t)0x03U) /* TIM9 Alternate Function mapping */
|
||||
#define GPIO_AF3_TIM10 ((uint8_t)0x03U) /* TIM10 Alternate Function mapping */
|
||||
#define GPIO_AF3_TIM11 ((uint8_t)0x03U) /* TIM11 Alternate Function mapping */
|
||||
#define GPIO_AF3_LPTIM1 ((uint8_t)0x03U) /* LPTIM1 Alternate Function mapping */
|
||||
#define GPIO_AF3_CEC ((uint8_t)0x03U) /* CEC Alternate Function mapping */
|
||||
#if defined (STM32F765xx) || defined(STM32F767xx) || defined(STM32F769xx) || defined(STM32F777xx) || defined(STM32F779xx)
|
||||
#define GPIO_AF3_DFSDM1 ((uint8_t)0x03U) /* DFSDM1 Alternate Function mapping */
|
||||
#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
|
||||
/**
|
||||
* @brief AF 4 selection
|
||||
*/
|
||||
#define GPIO_AF4_I2C1 ((uint8_t)0x04U) /* I2C1 Alternate Function mapping */
|
||||
#define GPIO_AF4_I2C2 ((uint8_t)0x04U) /* I2C2 Alternate Function mapping */
|
||||
#define GPIO_AF4_I2C3 ((uint8_t)0x04U) /* I2C3 Alternate Function mapping */
|
||||
#define GPIO_AF4_I2C4 ((uint8_t)0x04U) /* I2C4 Alternate Function mapping */
|
||||
#define GPIO_AF4_CEC ((uint8_t)0x04U) /* CEC Alternate Function mapping */
|
||||
#if defined (STM32F765xx) || defined(STM32F767xx) || defined(STM32F769xx) || defined(STM32F777xx) || defined(STM32F779xx)
|
||||
#define GPIO_AF4_USART1 ((uint8_t)0x04) /* USART1 Alternate Function mapping */
|
||||
#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
|
||||
|
||||
/**
|
||||
* @brief AF 5 selection
|
||||
*/
|
||||
#define GPIO_AF5_SPI1 ((uint8_t)0x05U) /* SPI1 Alternate Function mapping */
|
||||
#define GPIO_AF5_SPI2 ((uint8_t)0x05U) /* SPI2/I2S2 Alternate Function mapping */
|
||||
#define GPIO_AF5_SPI3 ((uint8_t)0x05U) /* SPI3/I2S3 Alternate Function mapping */
|
||||
#define GPIO_AF5_SPI4 ((uint8_t)0x05U) /* SPI4 Alternate Function mapping */
|
||||
#define GPIO_AF5_SPI5 ((uint8_t)0x05U) /* SPI5 Alternate Function mapping */
|
||||
#define GPIO_AF5_SPI6 ((uint8_t)0x05U) /* SPI6 Alternate Function mapping */
|
||||
|
||||
/**
|
||||
* @brief AF 6 selection
|
||||
*/
|
||||
#define GPIO_AF6_SPI3 ((uint8_t)0x06U) /* SPI3/I2S3 Alternate Function mapping */
|
||||
#define GPIO_AF6_SAI1 ((uint8_t)0x06U) /* SAI1 Alternate Function mapping */
|
||||
#if defined (STM32F765xx) || defined(STM32F767xx) || defined(STM32F769xx) || defined(STM32F777xx) || defined(STM32F779xx)
|
||||
#define GPIO_AF6_UART4 ((uint8_t)0x06U) /* UART4 Alternate Function mapping */
|
||||
#define GPIO_AF6_DFSDM1 ((uint8_t)0x06U) /* DFSDM1 Alternate Function mapping */
|
||||
#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
|
||||
|
||||
/**
|
||||
* @brief AF 7 selection
|
||||
*/
|
||||
#define GPIO_AF7_USART1 ((uint8_t)0x07U) /* USART1 Alternate Function mapping */
|
||||
#define GPIO_AF7_USART2 ((uint8_t)0x07U) /* USART2 Alternate Function mapping */
|
||||
#define GPIO_AF7_USART3 ((uint8_t)0x07U) /* USART3 Alternate Function mapping */
|
||||
#define GPIO_AF7_UART5 ((uint8_t)0x07U) /* UART5 Alternate Function mapping */
|
||||
#define GPIO_AF7_SPDIFRX ((uint8_t)0x07U) /* SPDIF-RX Alternate Function mapping */
|
||||
#define GPIO_AF7_SPI2 ((uint8_t)0x07U) /* SPI2 Alternate Function mapping */
|
||||
#define GPIO_AF7_SPI3 ((uint8_t)0x07U) /* SPI3 Alternate Function mapping */
|
||||
#if defined (STM32F765xx) || defined(STM32F767xx) || defined(STM32F769xx) || defined(STM32F777xx) || defined(STM32F779xx)
|
||||
#define GPIO_AF7_SPI6 ((uint8_t)0x07U) /* SPI6 Alternate Function mapping */
|
||||
#define GPIO_AF7_DFSDM1 ((uint8_t)0x07U) /* DFSDM1 Alternate Function mapping */
|
||||
#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
|
||||
|
||||
/**
|
||||
* @brief AF 8 selection
|
||||
*/
|
||||
#define GPIO_AF8_UART4 ((uint8_t)0x08U) /* UART4 Alternate Function mapping */
|
||||
#define GPIO_AF8_UART5 ((uint8_t)0x08U) /* UART5 Alternate Function mapping */
|
||||
#define GPIO_AF8_USART6 ((uint8_t)0x08U) /* USART6 Alternate Function mapping */
|
||||
#define GPIO_AF8_UART7 ((uint8_t)0x08U) /* UART7 Alternate Function mapping */
|
||||
#define GPIO_AF8_UART8 ((uint8_t)0x08U) /* UART8 Alternate Function mapping */
|
||||
#define GPIO_AF8_SPDIFRX ((uint8_t)0x08U) /* SPIDIF-RX Alternate Function mapping */
|
||||
#define GPIO_AF8_SAI2 ((uint8_t)0x08U) /* SAI2 Alternate Function mapping */
|
||||
#if defined (STM32F765xx) || defined(STM32F767xx) || defined(STM32F769xx) || defined(STM32F777xx) || defined(STM32F779xx)
|
||||
#define GPIO_AF8_SPI6 ((uint8_t)0x08U) /* SPI6 Alternate Function mapping */
|
||||
#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
|
||||
|
||||
|
||||
/**
|
||||
* @brief AF 9 selection
|
||||
*/
|
||||
#define GPIO_AF9_CAN1 ((uint8_t)0x09U) /* CAN1 Alternate Function mapping */
|
||||
#define GPIO_AF9_CAN2 ((uint8_t)0x09U) /* CAN2 Alternate Function mapping */
|
||||
#define GPIO_AF9_TIM12 ((uint8_t)0x09U) /* TIM12 Alternate Function mapping */
|
||||
#define GPIO_AF9_TIM13 ((uint8_t)0x09U) /* TIM13 Alternate Function mapping */
|
||||
#define GPIO_AF9_TIM14 ((uint8_t)0x09U) /* TIM14 Alternate Function mapping */
|
||||
#define GPIO_AF9_QUADSPI ((uint8_t)0x09U) /* QUADSPI Alternate Function mapping */
|
||||
#if defined(STM32F746xx) || defined(STM32F756xx) || defined(STM32F767xx) || defined(STM32F769xx) || defined(STM32F777xx) || defined(STM32F779xx) || defined(STM32F750xx)
|
||||
#define GPIO_AF9_LTDC ((uint8_t)0x09U) /* LCD-TFT Alternate Function mapping */
|
||||
#endif /* STM32F746xx || STM32F756xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx || STM32F750xx */
|
||||
#if defined(STM32F746xx) || defined(STM32F756xx) || defined(STM32F765xx) || defined(STM32F765xx) || defined(STM32F767xx) || defined(STM32F769xx) || defined(STM32F777xx) || defined(STM32F779xx) || defined(STM32F750xx)
|
||||
#define GPIO_AF9_FMC ((uint8_t)0x09U) /* FMC Alternate Function mapping */
|
||||
#endif /* STM32F746xx || STM32F756xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx || STM32F750xx */
|
||||
/**
|
||||
* @brief AF 10 selection
|
||||
*/
|
||||
#define GPIO_AF10_OTG_FS ((uint8_t)0xAU) /* OTG_FS Alternate Function mapping */
|
||||
#define GPIO_AF10_OTG_HS ((uint8_t)0xAU) /* OTG_HS Alternate Function mapping */
|
||||
#define GPIO_AF10_QUADSPI ((uint8_t)0xAU) /* QUADSPI Alternate Function mapping */
|
||||
#define GPIO_AF10_SAI2 ((uint8_t)0xAU) /* SAI2 Alternate Function mapping */
|
||||
#if defined (STM32F765xx) || defined(STM32F767xx) || defined(STM32F769xx) || defined(STM32F777xx) || defined(STM32F779xx)
|
||||
#define GPIO_AF10_DFSDM1 ((uint8_t)0x0AU) /* DFSDM1 Alternate Function mapping */
|
||||
#define GPIO_AF10_SDMMC2 ((uint8_t)0x0AU) /* SDMMC2 Alternate Function mapping */
|
||||
#define GPIO_AF10_LTDC ((uint8_t)0x0AU) /* LCD-TFT Alternate Function mapping */
|
||||
#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
|
||||
|
||||
/**
|
||||
* @brief AF 11 selection
|
||||
*/
|
||||
#define GPIO_AF11_ETH ((uint8_t)0x0BU) /* ETHERNET Alternate Function mapping */
|
||||
#if defined(STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
|
||||
#define GPIO_AF11_CAN3 ((uint8_t)0x0BU) /* CAN3 Alternate Function mapping */
|
||||
#define GPIO_AF11_SDMMC2 ((uint8_t)0x0BU) /* SDMMC2 Alternate Function mapping */
|
||||
#define GPIO_AF11_I2C4 ((uint8_t)0x0BU) /* I2C4 Alternate Function mapping */
|
||||
#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
|
||||
|
||||
/**
|
||||
* @brief AF 12 selection
|
||||
*/
|
||||
#define GPIO_AF12_FMC ((uint8_t)0xCU) /* FMC Alternate Function mapping */
|
||||
#define GPIO_AF12_OTG_HS_FS ((uint8_t)0xCU) /* OTG HS configured in FS, Alternate Function mapping */
|
||||
#define GPIO_AF12_SDMMC1 ((uint8_t)0xCU) /* SDMMC1 Alternate Function mapping */
|
||||
#if defined(STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
|
||||
#define GPIO_AF12_MDIOS ((uint8_t)0xCU) /* SDMMC1 Alternate Function mapping */
|
||||
#define GPIO_AF12_UART7 ((uint8_t)0xCU) /* UART7 Alternate Function mapping */
|
||||
#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
|
||||
|
||||
/**
|
||||
* @brief AF 13 selection
|
||||
*/
|
||||
#define GPIO_AF13_DCMI ((uint8_t)0x0DU) /* DCMI Alternate Function mapping */
|
||||
#if defined (STM32F769xx) || defined (STM32F779xx)
|
||||
#define GPIO_AF13_DSI ((uint8_t)0x0DU) /* DSI Alternate Function mapping */
|
||||
#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
|
||||
#if defined(STM32F746xx) || defined(STM32F756xx) || defined(STM32F767xx) || defined(STM32F769xx) || defined(STM32F777xx) || defined(STM32F779xx) || defined(STM32F750xx)
|
||||
#define GPIO_AF13_LTDC ((uint8_t)0x0DU) /* LTDC Alternate Function mapping */
|
||||
|
||||
/**
|
||||
* @brief AF 14 selection
|
||||
*/
|
||||
#define GPIO_AF14_LTDC ((uint8_t)0x0EU) /* LCD-TFT Alternate Function mapping */
|
||||
#endif /* STM32F746xx || STM32F756xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx || STM32F750xx */
|
||||
/**
|
||||
* @brief AF 15 selection
|
||||
*/
|
||||
#define GPIO_AF15_EVENTOUT ((uint8_t)0x0FU) /* EVENTOUT Alternate Function mapping */
|
||||
#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
|
||||
/*----------------------------------------------------------------------------*/
|
||||
|
||||
/*---------------------------- STM32F72xxx/STM32F73xxx -----------------------*/
|
||||
#if defined(STM32F722xx) || defined(STM32F723xx) || defined(STM32F732xx) || defined(STM32F733xx) || defined(STM32F730xx)
|
||||
/**
|
||||
* @brief AF 0 selection
|
||||
*/
|
||||
#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00U) /* RTC_50Hz Alternate Function mapping */
|
||||
#define GPIO_AF0_MCO ((uint8_t)0x00U) /* MCO (MCO1 and MCO2) Alternate Function mapping */
|
||||
#define GPIO_AF0_SWJ ((uint8_t)0x00U) /* SWJ (SWD and JTAG) Alternate Function mapping */
|
||||
#define GPIO_AF0_TRACE ((uint8_t)0x00U) /* TRACE Alternate Function mapping */
|
||||
|
||||
/**
|
||||
* @brief AF 1 selection
|
||||
*/
|
||||
#define GPIO_AF1_TIM1 ((uint8_t)0x01U) /* TIM1 Alternate Function mapping */
|
||||
#define GPIO_AF1_TIM2 ((uint8_t)0x01U) /* TIM2 Alternate Function mapping */
|
||||
|
||||
/**
|
||||
* @brief AF 2 selection
|
||||
*/
|
||||
#define GPIO_AF2_TIM3 ((uint8_t)0x02U) /* TIM3 Alternate Function mapping */
|
||||
#define GPIO_AF2_TIM4 ((uint8_t)0x02U) /* TIM4 Alternate Function mapping */
|
||||
#define GPIO_AF2_TIM5 ((uint8_t)0x02U) /* TIM5 Alternate Function mapping */
|
||||
|
||||
/**
|
||||
* @brief AF 3 selection
|
||||
*/
|
||||
#define GPIO_AF3_TIM8 ((uint8_t)0x03U) /* TIM8 Alternate Function mapping */
|
||||
#define GPIO_AF3_TIM9 ((uint8_t)0x03U) /* TIM9 Alternate Function mapping */
|
||||
#define GPIO_AF3_TIM10 ((uint8_t)0x03U) /* TIM10 Alternate Function mapping */
|
||||
#define GPIO_AF3_TIM11 ((uint8_t)0x03U) /* TIM11 Alternate Function mapping */
|
||||
#define GPIO_AF3_LPTIM1 ((uint8_t)0x03U) /* LPTIM1 Alternate Function mapping */
|
||||
|
||||
/**
|
||||
* @brief AF 4 selection
|
||||
*/
|
||||
#define GPIO_AF4_I2C1 ((uint8_t)0x04U) /* I2C1 Alternate Function mapping */
|
||||
#define GPIO_AF4_I2C2 ((uint8_t)0x04U) /* I2C2 Alternate Function mapping */
|
||||
#define GPIO_AF4_I2C3 ((uint8_t)0x04U) /* I2C3 Alternate Function mapping */
|
||||
|
||||
/**
|
||||
* @brief AF 5 selection
|
||||
*/
|
||||
#define GPIO_AF5_SPI1 ((uint8_t)0x05U) /* SPI1 Alternate Function mapping */
|
||||
#define GPIO_AF5_SPI2 ((uint8_t)0x05U) /* SPI2/I2S2 Alternate Function mapping */
|
||||
#define GPIO_AF5_SPI3 ((uint8_t)0x05U) /* SPI3/I2S3 Alternate Function mapping */
|
||||
#define GPIO_AF5_SPI4 ((uint8_t)0x05U) /* SPI4 Alternate Function mapping */
|
||||
#define GPIO_AF5_SPI5 ((uint8_t)0x05U) /* SPI5 Alternate Function mapping */
|
||||
|
||||
/**
|
||||
* @brief AF 6 selection
|
||||
*/
|
||||
#define GPIO_AF6_SPI3 ((uint8_t)0x06U) /* SPI3/I2S3 Alternate Function mapping */
|
||||
#define GPIO_AF6_SAI1 ((uint8_t)0x06U) /* SAI1 Alternate Function mapping */
|
||||
|
||||
/**
|
||||
* @brief AF 7 selection
|
||||
*/
|
||||
#define GPIO_AF7_USART1 ((uint8_t)0x07U) /* USART1 Alternate Function mapping */
|
||||
#define GPIO_AF7_USART2 ((uint8_t)0x07U) /* USART2 Alternate Function mapping */
|
||||
#define GPIO_AF7_USART3 ((uint8_t)0x07U) /* USART3 Alternate Function mapping */
|
||||
#define GPIO_AF7_UART5 ((uint8_t)0x07U) /* UART5 Alternate Function mapping */
|
||||
#define GPIO_AF7_SPI2 ((uint8_t)0x07U) /* SPI2 Alternate Function mapping */
|
||||
#define GPIO_AF7_SPI3 ((uint8_t)0x07U) /* SPI3 Alternate Function mapping */
|
||||
|
||||
/**
|
||||
* @brief AF 8 selection
|
||||
*/
|
||||
#define GPIO_AF8_UART4 ((uint8_t)0x08U) /* UART4 Alternate Function mapping */
|
||||
#define GPIO_AF8_UART5 ((uint8_t)0x08U) /* UART5 Alternate Function mapping */
|
||||
#define GPIO_AF8_USART6 ((uint8_t)0x08U) /* USART6 Alternate Function mapping */
|
||||
#define GPIO_AF8_UART7 ((uint8_t)0x08U) /* UART7 Alternate Function mapping */
|
||||
#define GPIO_AF8_UART8 ((uint8_t)0x08U) /* UART8 Alternate Function mapping */
|
||||
#define GPIO_AF8_SAI2 ((uint8_t)0x08U) /* SAI2 Alternate Function mapping */
|
||||
|
||||
/**
|
||||
* @brief AF 9 selection
|
||||
*/
|
||||
#define GPIO_AF9_CAN1 ((uint8_t)0x09U) /* CAN1 Alternate Function mapping */
|
||||
#define GPIO_AF9_TIM12 ((uint8_t)0x09U) /* TIM12 Alternate Function mapping */
|
||||
#define GPIO_AF9_TIM13 ((uint8_t)0x09U) /* TIM13 Alternate Function mapping */
|
||||
#define GPIO_AF9_TIM14 ((uint8_t)0x09U) /* TIM14 Alternate Function mapping */
|
||||
#define GPIO_AF9_QUADSPI ((uint8_t)0x09U) /* QUADSPI Alternate Function mapping */
|
||||
|
||||
/**
|
||||
* @brief AF 10 selection
|
||||
*/
|
||||
#define GPIO_AF10_OTG_FS ((uint8_t)0xAU) /* OTG_FS Alternate Function mapping */
|
||||
#define GPIO_AF10_OTG_HS ((uint8_t)0xAU) /* OTG_HS Alternate Function mapping */
|
||||
#define GPIO_AF10_QUADSPI ((uint8_t)0xAU) /* QUADSPI Alternate Function mapping */
|
||||
#define GPIO_AF10_SAI2 ((uint8_t)0xAU) /* SAI2 Alternate Function mapping */
|
||||
#define GPIO_AF10_SDMMC2 ((uint8_t)0x0AU) /* SDMMC2 Alternate Function mapping */
|
||||
|
||||
/**
|
||||
* @brief AF 11 selection
|
||||
*/
|
||||
#define GPIO_AF11_SDMMC2 ((uint8_t)0x0BU) /* SDMMC2 Alternate Function mapping */
|
||||
|
||||
/**
|
||||
* @brief AF 12 selection
|
||||
*/
|
||||
#define GPIO_AF12_FMC ((uint8_t)0xCU) /* FMC Alternate Function mapping */
|
||||
#define GPIO_AF12_OTG_HS_FS ((uint8_t)0xCU) /* OTG HS configured in FS, Alternate Function mapping */
|
||||
#define GPIO_AF12_SDMMC1 ((uint8_t)0xCU) /* SDMMC1 Alternate Function mapping */
|
||||
|
||||
/**
|
||||
* @brief AF 13 selection
|
||||
*/
|
||||
#define GPIO_AF13_RNG ((uint8_t)0x0DU) /* RNG Alternate Function mapping */
|
||||
|
||||
/**
|
||||
* @brief AF 15 selection
|
||||
*/
|
||||
#define GPIO_AF15_EVENTOUT ((uint8_t)0x0FU) /* EVENTOUT Alternate Function mapping */
|
||||
#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx || STM32F730xx */
|
||||
/*----------------------------------------------------------------------------*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/** @defgroup GPIOEx_Exported_Macros GPIO Exported Macros
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @defgroup GPIOEx_Exported_Functions GPIO Exported Functions
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/** @defgroup GPIOEx_Private_Constants GPIO Private Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief GPIO pin available on the platform
|
||||
*/
|
||||
/* Defines the available pins per GPIOs */
|
||||
#define GPIOA_PIN_AVAILABLE GPIO_PIN_All
|
||||
#define GPIOB_PIN_AVAILABLE GPIO_PIN_All
|
||||
#define GPIOC_PIN_AVAILABLE GPIO_PIN_All
|
||||
#define GPIOD_PIN_AVAILABLE GPIO_PIN_All
|
||||
#define GPIOE_PIN_AVAILABLE GPIO_PIN_All
|
||||
#define GPIOF_PIN_AVAILABLE GPIO_PIN_All
|
||||
#define GPIOG_PIN_AVAILABLE GPIO_PIN_All
|
||||
#define GPIOI_PIN_AVAILABLE GPIO_PIN_All
|
||||
#define GPIOJ_PIN_AVAILABLE GPIO_PIN_All
|
||||
#define GPIOH_PIN_AVAILABLE GPIO_PIN_All
|
||||
#define GPIOK_PIN_AVAILABLE (GPIO_PIN_0 | GPIO_PIN_1 | GPIO_PIN_2 | GPIO_PIN_3 | GPIO_PIN_4 | \
|
||||
GPIO_PIN_5 | GPIO_PIN_6 | GPIO_PIN_7)
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup GPIOEx_Private_Macros GPIO Private Macros
|
||||
* @{
|
||||
*/
|
||||
/** @defgroup GPIOEx_Get_Port_Index GPIO Get Port Index
|
||||
* @{
|
||||
*/
|
||||
#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) ||\
|
||||
defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) ||\
|
||||
defined (STM32F750xx)
|
||||
#define GPIO_GET_INDEX(__GPIOx__) (uint8_t)(((__GPIOx__) == (GPIOA))? 0U :\
|
||||
((__GPIOx__) == (GPIOB))? 1U :\
|
||||
((__GPIOx__) == (GPIOC))? 2U :\
|
||||
((__GPIOx__) == (GPIOD))? 3U :\
|
||||
((__GPIOx__) == (GPIOE))? 4U :\
|
||||
((__GPIOx__) == (GPIOF))? 5U :\
|
||||
((__GPIOx__) == (GPIOG))? 6U :\
|
||||
((__GPIOx__) == (GPIOH))? 7U :\
|
||||
((__GPIOx__) == (GPIOI))? 8U :\
|
||||
((__GPIOx__) == (GPIOJ))? 9U : 10U)
|
||||
#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx || STM32F750xx */
|
||||
|
||||
#if defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx) || defined (STM32F730xx)
|
||||
#define GPIO_GET_INDEX(__GPIOx__) (uint8_t)(((__GPIOx__) == (GPIOA))? 0U :\
|
||||
((__GPIOx__) == (GPIOB))? 1U :\
|
||||
((__GPIOx__) == (GPIOC))? 2U :\
|
||||
((__GPIOx__) == (GPIOD))? 3U :\
|
||||
((__GPIOx__) == (GPIOE))? 4U :\
|
||||
((__GPIOx__) == (GPIOF))? 5U :\
|
||||
((__GPIOx__) == (GPIOG))? 6U :\
|
||||
((__GPIOx__) == (GPIOH))? 7U : 8U)
|
||||
#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx || STM32F730xx */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#define IS_GPIO_PIN_AVAILABLE(__INSTANCE__,__PIN__) \
|
||||
((((__INSTANCE__) == GPIOA) && (((__PIN__) & (GPIOA_PIN_AVAILABLE)) != 0) && (((__PIN__) | (GPIOA_PIN_AVAILABLE)) == (GPIOA_PIN_AVAILABLE))) || \
|
||||
(((__INSTANCE__) == GPIOB) && (((__PIN__) & (GPIOB_PIN_AVAILABLE)) != 0) && (((__PIN__) | (GPIOB_PIN_AVAILABLE)) == (GPIOB_PIN_AVAILABLE))) || \
|
||||
(((__INSTANCE__) == GPIOC) && (((__PIN__) & (GPIOC_PIN_AVAILABLE)) != 0) && (((__PIN__) | (GPIOC_PIN_AVAILABLE)) == (GPIOC_PIN_AVAILABLE))) || \
|
||||
(((__INSTANCE__) == GPIOD) && (((__PIN__) & (GPIOD_PIN_AVAILABLE)) != 0) && (((__PIN__) | (GPIOD_PIN_AVAILABLE)) == (GPIOD_PIN_AVAILABLE))) || \
|
||||
(((__INSTANCE__) == GPIOE) && (((__PIN__) & (GPIOE_PIN_AVAILABLE)) != 0) && (((__PIN__) | (GPIOE_PIN_AVAILABLE)) == (GPIOE_PIN_AVAILABLE))) || \
|
||||
(((__INSTANCE__) == GPIOF) && (((__PIN__) & (GPIOF_PIN_AVAILABLE)) != 0) && (((__PIN__) | (GPIOF_PIN_AVAILABLE)) == (GPIOF_PIN_AVAILABLE))) || \
|
||||
(((__INSTANCE__) == GPIOG) && (((__PIN__) & (GPIOG_PIN_AVAILABLE)) != 0) && (((__PIN__) | (GPIOG_PIN_AVAILABLE)) == (GPIOG_PIN_AVAILABLE))) || \
|
||||
(((__INSTANCE__) == GPIOI) && (((__PIN__) & (GPIOI_PIN_AVAILABLE)) != 0) && (((__PIN__) | (GPIOI_PIN_AVAILABLE)) == (GPIOI_PIN_AVAILABLE))) || \
|
||||
(((__INSTANCE__) == GPIOJ) && (((__PIN__) & (GPIOJ_PIN_AVAILABLE)) != 0) && (((__PIN__) | (GPIOJ_PIN_AVAILABLE)) == (GPIOJ_PIN_AVAILABLE))) || \
|
||||
(((__INSTANCE__) == GPIOK) && (((__PIN__) & (GPIOK_PIN_AVAILABLE)) != 0) && (((__PIN__) | (GPIOK_PIN_AVAILABLE)) == (GPIOK_PIN_AVAILABLE))) || \
|
||||
(((__INSTANCE__) == GPIOH) && (((__PIN__) & (GPIOH_PIN_AVAILABLE)) != 0) && (((__PIN__) | (GPIOH_PIN_AVAILABLE)) == (GPIOH_PIN_AVAILABLE))))
|
||||
/** @defgroup GPIOEx_IS_Alternat_function_selection GPIO Check Alternate Function
|
||||
* @{
|
||||
*/
|
||||
#if defined(STM32F756xx) || defined(STM32F746xx) || defined(STM32F750xx)
|
||||
#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF1_TIM1) || \
|
||||
((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \
|
||||
((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF1_TIM2) || \
|
||||
((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \
|
||||
((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \
|
||||
((AF) == GPIO_AF3_TIM9) || ((AF) == GPIO_AF3_TIM10) || \
|
||||
((AF) == GPIO_AF3_TIM11) || ((AF) == GPIO_AF3_LPTIM1) || \
|
||||
((AF) == GPIO_AF3_CEC) || ((AF) == GPIO_AF4_CEC) || \
|
||||
((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \
|
||||
((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF4_I2C4) || \
|
||||
((AF) == GPIO_AF5_SPI1) || ((AF) == GPIO_AF5_SPI2) || \
|
||||
((AF) == GPIO_AF5_SPI3) || ((AF) == GPIO_AF5_SPI4) || \
|
||||
((AF) == GPIO_AF5_SPI5) || ((AF) == GPIO_AF5_SPI6) || \
|
||||
((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF6_SAI1) || \
|
||||
((AF) == GPIO_AF7_SPI3) || ((AF) == GPIO_AF7_SPI2) || \
|
||||
((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \
|
||||
((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF7_UART5) || \
|
||||
((AF) == GPIO_AF7_SPDIFRX) || ((AF) == GPIO_AF8_SPDIFRX) || \
|
||||
((AF) == GPIO_AF8_SAI2) || ((AF) == GPIO_AF8_USART6) || \
|
||||
((AF) == GPIO_AF8_UART4) || ((AF) == GPIO_AF8_UART5) || \
|
||||
((AF) == GPIO_AF8_UART7) || ((AF) == GPIO_AF8_UART8) || \
|
||||
((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_CAN2) || \
|
||||
((AF) == GPIO_AF9_TIM12) || ((AF) == GPIO_AF9_TIM12) || \
|
||||
((AF) == GPIO_AF9_TIM14) || ((AF) == GPIO_AF9_QUADSPI) || \
|
||||
((AF) == GPIO_AF9_LTDC) || ((AF) == GPIO_AF10_OTG_FS) || \
|
||||
((AF) == GPIO_AF10_OTG_HS) || ((AF) == GPIO_AF10_SAI2) || \
|
||||
((AF) == GPIO_AF10_QUADSPI) || ((AF) == GPIO_AF11_ETH) || \
|
||||
((AF) == GPIO_AF12_OTG_HS_FS) || ((AF) == GPIO_AF12_SDMMC1) || \
|
||||
((AF) == GPIO_AF12_FMC) || ((AF) == GPIO_AF15_EVENTOUT) || \
|
||||
((AF) == GPIO_AF13_DCMI) || ((AF) == GPIO_AF14_LTDC))
|
||||
#elif defined(STM32F745xx)
|
||||
#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF1_TIM1) || \
|
||||
((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \
|
||||
((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF1_TIM2) || \
|
||||
((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \
|
||||
((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \
|
||||
((AF) == GPIO_AF3_TIM9) || ((AF) == GPIO_AF3_TIM10) || \
|
||||
((AF) == GPIO_AF3_TIM11) || ((AF) == GPIO_AF3_LPTIM1) || \
|
||||
((AF) == GPIO_AF3_CEC) || ((AF) == GPIO_AF4_CEC) || \
|
||||
((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \
|
||||
((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF4_I2C4) || \
|
||||
((AF) == GPIO_AF5_SPI1) || ((AF) == GPIO_AF5_SPI2) || \
|
||||
((AF) == GPIO_AF5_SPI3) || ((AF) == GPIO_AF5_SPI4) || \
|
||||
((AF) == GPIO_AF5_SPI5) || ((AF) == GPIO_AF5_SPI6) || \
|
||||
((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF6_SAI1) || \
|
||||
((AF) == GPIO_AF7_SPI3) || ((AF) == GPIO_AF7_SPI2) || \
|
||||
((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \
|
||||
((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF7_UART5) || \
|
||||
((AF) == GPIO_AF7_SPDIFRX) || ((AF) == GPIO_AF8_SPDIFRX) || \
|
||||
((AF) == GPIO_AF8_SAI2) || ((AF) == GPIO_AF8_USART6) || \
|
||||
((AF) == GPIO_AF8_UART4) || ((AF) == GPIO_AF8_UART5) || \
|
||||
((AF) == GPIO_AF8_UART7) || ((AF) == GPIO_AF8_UART8) || \
|
||||
((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_CAN2) || \
|
||||
((AF) == GPIO_AF9_TIM12) || ((AF) == GPIO_AF9_TIM12) || \
|
||||
((AF) == GPIO_AF9_TIM14) || ((AF) == GPIO_AF9_QUADSPI) || \
|
||||
((AF) == GPIO_AF13_DCMI) || ((AF) == GPIO_AF10_OTG_FS) || \
|
||||
((AF) == GPIO_AF10_OTG_HS) || ((AF) == GPIO_AF10_SAI2) || \
|
||||
((AF) == GPIO_AF10_QUADSPI) || ((AF) == GPIO_AF11_ETH) || \
|
||||
((AF) == GPIO_AF12_OTG_HS_FS) || ((AF) == GPIO_AF12_SDMMC1) || \
|
||||
((AF) == GPIO_AF12_FMC) || ((AF) == GPIO_AF15_EVENTOUT))
|
||||
#elif defined(STM32F767xx) || defined(STM32F777xx)
|
||||
#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF1_TIM1) || \
|
||||
((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \
|
||||
((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF1_TIM2) || \
|
||||
((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \
|
||||
((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \
|
||||
((AF) == GPIO_AF3_TIM9) || ((AF) == GPIO_AF3_TIM10) || \
|
||||
((AF) == GPIO_AF3_TIM11) || ((AF) == GPIO_AF3_LPTIM1) || \
|
||||
((AF) == GPIO_AF3_CEC) || ((AF) == GPIO_AF4_CEC) || \
|
||||
((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \
|
||||
((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF4_I2C4) || \
|
||||
((AF) == GPIO_AF5_SPI1) || ((AF) == GPIO_AF5_SPI2) || \
|
||||
((AF) == GPIO_AF5_SPI3) || ((AF) == GPIO_AF5_SPI4) || \
|
||||
((AF) == GPIO_AF5_SPI5) || ((AF) == GPIO_AF5_SPI6) || \
|
||||
((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF6_SAI1) || \
|
||||
((AF) == GPIO_AF7_SPI3) || ((AF) == GPIO_AF7_SPI2) || \
|
||||
((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \
|
||||
((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF7_UART5) || \
|
||||
((AF) == GPIO_AF7_SPDIFRX) || ((AF) == GPIO_AF8_SPDIFRX) || \
|
||||
((AF) == GPIO_AF8_SAI2) || ((AF) == GPIO_AF8_USART6) || \
|
||||
((AF) == GPIO_AF8_UART4) || ((AF) == GPIO_AF8_UART5) || \
|
||||
((AF) == GPIO_AF8_UART7) || ((AF) == GPIO_AF8_UART8) || \
|
||||
((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_CAN2) || \
|
||||
((AF) == GPIO_AF9_TIM12) || ((AF) == GPIO_AF9_TIM12) || \
|
||||
((AF) == GPIO_AF9_TIM14) || ((AF) == GPIO_AF9_QUADSPI) || \
|
||||
((AF) == GPIO_AF10_OTG_FS) || ((AF) == GPIO_AF9_LTDC) || \
|
||||
((AF) == GPIO_AF10_OTG_HS) || ((AF) == GPIO_AF10_SAI2) || \
|
||||
((AF) == GPIO_AF10_QUADSPI) || ((AF) == GPIO_AF11_ETH) || \
|
||||
((AF) == GPIO_AF10_SDMMC2) || ((AF) == GPIO_AF11_SDMMC2) || \
|
||||
((AF) == GPIO_AF11_CAN3) || ((AF) == GPIO_AF12_OTG_HS_FS) || \
|
||||
((AF) == GPIO_AF12_SDMMC1) || ((AF) == GPIO_AF12_FMC) || \
|
||||
((AF) == GPIO_AF15_EVENTOUT) || ((AF) == GPIO_AF13_DCMI) || \
|
||||
((AF) == GPIO_AF14_LTDC))
|
||||
#elif defined(STM32F769xx) || defined(STM32F779xx)
|
||||
#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF1_TIM1) || \
|
||||
((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \
|
||||
((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF1_TIM2) || \
|
||||
((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \
|
||||
((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \
|
||||
((AF) == GPIO_AF3_TIM9) || ((AF) == GPIO_AF3_TIM10) || \
|
||||
((AF) == GPIO_AF3_TIM11) || ((AF) == GPIO_AF3_LPTIM1) || \
|
||||
((AF) == GPIO_AF3_CEC) || ((AF) == GPIO_AF4_CEC) || \
|
||||
((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \
|
||||
((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF4_I2C4) || \
|
||||
((AF) == GPIO_AF5_SPI1) || ((AF) == GPIO_AF5_SPI2) || \
|
||||
((AF) == GPIO_AF5_SPI3) || ((AF) == GPIO_AF5_SPI4) || \
|
||||
((AF) == GPIO_AF5_SPI5) || ((AF) == GPIO_AF5_SPI6) || \
|
||||
((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF6_SAI1) || \
|
||||
((AF) == GPIO_AF7_SPI3) || ((AF) == GPIO_AF7_SPI2) || \
|
||||
((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \
|
||||
((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF7_UART5) || \
|
||||
((AF) == GPIO_AF7_SPDIFRX) || ((AF) == GPIO_AF8_SPDIFRX) || \
|
||||
((AF) == GPIO_AF8_SAI2) || ((AF) == GPIO_AF8_USART6) || \
|
||||
((AF) == GPIO_AF8_UART4) || ((AF) == GPIO_AF8_UART5) || \
|
||||
((AF) == GPIO_AF8_UART7) || ((AF) == GPIO_AF8_UART8) || \
|
||||
((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_CAN2) || \
|
||||
((AF) == GPIO_AF9_TIM12) || ((AF) == GPIO_AF9_TIM12) || \
|
||||
((AF) == GPIO_AF9_TIM14) || ((AF) == GPIO_AF9_QUADSPI) || \
|
||||
((AF) == GPIO_AF9_LTDC) || ((AF) == GPIO_AF10_OTG_FS) || \
|
||||
((AF) == GPIO_AF10_OTG_HS) || ((AF) == GPIO_AF10_SAI2) || \
|
||||
((AF) == GPIO_AF10_QUADSPI) || ((AF) == GPIO_AF11_ETH) || \
|
||||
((AF) == GPIO_AF10_SDMMC2) || ((AF) == GPIO_AF11_SDMMC2) || \
|
||||
((AF) == GPIO_AF11_CAN3) || ((AF) == GPIO_AF12_OTG_HS_FS) || \
|
||||
((AF) == GPIO_AF12_SDMMC1) || ((AF) == GPIO_AF12_FMC) || \
|
||||
((AF) == GPIO_AF15_EVENTOUT) || ((AF) == GPIO_AF13_DCMI) || \
|
||||
((AF) == GPIO_AF14_LTDC) || ((AF) == GPIO_AF13_DSI))
|
||||
#elif defined(STM32F765xx)
|
||||
#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF1_TIM1) || \
|
||||
((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \
|
||||
((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF1_TIM2) || \
|
||||
((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \
|
||||
((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \
|
||||
((AF) == GPIO_AF3_TIM9) || ((AF) == GPIO_AF3_TIM10) || \
|
||||
((AF) == GPIO_AF3_TIM11) || ((AF) == GPIO_AF3_LPTIM1) || \
|
||||
((AF) == GPIO_AF3_CEC) || ((AF) == GPIO_AF4_CEC) || \
|
||||
((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \
|
||||
((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF4_I2C4) || \
|
||||
((AF) == GPIO_AF5_SPI1) || ((AF) == GPIO_AF5_SPI2) || \
|
||||
((AF) == GPIO_AF5_SPI3) || ((AF) == GPIO_AF5_SPI4) || \
|
||||
((AF) == GPIO_AF5_SPI5) || ((AF) == GPIO_AF5_SPI6) || \
|
||||
((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF6_SAI1) || \
|
||||
((AF) == GPIO_AF7_SPI3) || ((AF) == GPIO_AF7_SPI2) || \
|
||||
((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \
|
||||
((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF7_UART5) || \
|
||||
((AF) == GPIO_AF7_SPDIFRX) || ((AF) == GPIO_AF8_SPDIFRX) || \
|
||||
((AF) == GPIO_AF8_SAI2) || ((AF) == GPIO_AF8_USART6) || \
|
||||
((AF) == GPIO_AF8_UART4) || ((AF) == GPIO_AF8_UART5) || \
|
||||
((AF) == GPIO_AF8_UART7) || ((AF) == GPIO_AF8_UART8) || \
|
||||
((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_CAN2) || \
|
||||
((AF) == GPIO_AF9_TIM12) || ((AF) == GPIO_AF9_TIM12) || \
|
||||
((AF) == GPIO_AF9_TIM14) || ((AF) == GPIO_AF9_QUADSPI) || \
|
||||
((AF) == GPIO_AF10_OTG_HS) || ((AF) == GPIO_AF10_SAI2) || \
|
||||
((AF) == GPIO_AF10_QUADSPI) || ((AF) == GPIO_AF11_ETH) || \
|
||||
((AF) == GPIO_AF10_SDMMC2) || ((AF) == GPIO_AF11_SDMMC2) || \
|
||||
((AF) == GPIO_AF11_CAN3) || ((AF) == GPIO_AF12_OTG_HS_FS) || \
|
||||
((AF) == GPIO_AF12_SDMMC1) || ((AF) == GPIO_AF12_FMC) || \
|
||||
((AF) == GPIO_AF15_EVENTOUT) || ((AF) == GPIO_AF13_DCMI) || \
|
||||
((AF) == GPIO_AF10_OTG_FS))
|
||||
#elif defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx) || defined (STM32F730xx)
|
||||
#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF1_TIM1) || \
|
||||
((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \
|
||||
((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF1_TIM2) || \
|
||||
((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \
|
||||
((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \
|
||||
((AF) == GPIO_AF3_TIM9) || ((AF) == GPIO_AF3_TIM10) || \
|
||||
((AF) == GPIO_AF3_TIM11) || ((AF) == GPIO_AF3_LPTIM1) || \
|
||||
((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \
|
||||
((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF5_SPI1) || \
|
||||
((AF) == GPIO_AF5_SPI2) || ((AF) == GPIO_AF5_SPI3) || \
|
||||
((AF) == GPIO_AF5_SPI4) || ((AF) == GPIO_AF5_SPI5) || \
|
||||
((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF6_SAI1) || \
|
||||
((AF) == GPIO_AF7_SPI3) || ((AF) == GPIO_AF7_SPI2) || \
|
||||
((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \
|
||||
((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF7_UART5) || \
|
||||
((AF) == GPIO_AF8_SAI2) || ((AF) == GPIO_AF8_USART6) || \
|
||||
((AF) == GPIO_AF8_UART4) || ((AF) == GPIO_AF8_UART5) || \
|
||||
((AF) == GPIO_AF8_UART7) || ((AF) == GPIO_AF8_UART8) || \
|
||||
((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_TIM12) || \
|
||||
((AF) == GPIO_AF9_TIM12) || ((AF) == GPIO_AF9_TIM14) || \
|
||||
((AF) == GPIO_AF9_QUADSPI) || ((AF) == GPIO_AF10_OTG_HS) || \
|
||||
((AF) == GPIO_AF10_SAI2) || ((AF) == GPIO_AF10_QUADSPI) || \
|
||||
((AF) == GPIO_AF10_SDMMC2) || ((AF) == GPIO_AF11_SDMMC2) || \
|
||||
((AF) == GPIO_AF12_OTG_HS_FS) || ((AF) == GPIO_AF12_SDMMC1) || \
|
||||
((AF) == GPIO_AF12_FMC) || ((AF) == GPIO_AF15_EVENTOUT) || \
|
||||
((AF) == GPIO_AF10_OTG_FS))
|
||||
#endif /* STM32F756xx || STM32F746xx || STM32F750xx */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
/** @defgroup GPIOEx_Private_Functions GPIO Private Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32F7xx_HAL_GPIO_EX_H */
|
||||
|
||||
@@ -0,0 +1,835 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f7xx_hal_i2c.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of I2C HAL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef STM32F7xx_HAL_I2C_H
|
||||
#define STM32F7xx_HAL_I2C_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f7xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F7xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup I2C
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/** @defgroup I2C_Exported_Types I2C Exported Types
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup I2C_Configuration_Structure_definition I2C Configuration Structure definition
|
||||
* @brief I2C Configuration Structure definition
|
||||
* @{
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t Timing; /*!< Specifies the I2C_TIMINGR_register value.
|
||||
This parameter calculated by referring to I2C initialization section
|
||||
in Reference manual */
|
||||
|
||||
uint32_t OwnAddress1; /*!< Specifies the first device own address.
|
||||
This parameter can be a 7-bit or 10-bit address. */
|
||||
|
||||
uint32_t AddressingMode; /*!< Specifies if 7-bit or 10-bit addressing mode is selected.
|
||||
This parameter can be a value of @ref I2C_ADDRESSING_MODE */
|
||||
|
||||
uint32_t DualAddressMode; /*!< Specifies if dual addressing mode is selected.
|
||||
This parameter can be a value of @ref I2C_DUAL_ADDRESSING_MODE */
|
||||
|
||||
uint32_t OwnAddress2; /*!< Specifies the second device own address if dual addressing mode is selected
|
||||
This parameter can be a 7-bit address. */
|
||||
|
||||
uint32_t OwnAddress2Masks; /*!< Specifies the acknowledge mask address second device own address if dual addressing
|
||||
mode is selected.
|
||||
This parameter can be a value of @ref I2C_OWN_ADDRESS2_MASKS */
|
||||
|
||||
uint32_t GeneralCallMode; /*!< Specifies if general call mode is selected.
|
||||
This parameter can be a value of @ref I2C_GENERAL_CALL_ADDRESSING_MODE */
|
||||
|
||||
uint32_t NoStretchMode; /*!< Specifies if nostretch mode is selected.
|
||||
This parameter can be a value of @ref I2C_NOSTRETCH_MODE */
|
||||
|
||||
} I2C_InitTypeDef;
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup HAL_state_structure_definition HAL state structure definition
|
||||
* @brief HAL State structure definition
|
||||
* @note HAL I2C State value coding follow below described bitmap :\n
|
||||
* b7-b6 Error information\n
|
||||
* 00 : No Error\n
|
||||
* 01 : Abort (Abort user request on going)\n
|
||||
* 10 : Timeout\n
|
||||
* 11 : Error\n
|
||||
* b5 Peripheral initialization status\n
|
||||
* 0 : Reset (peripheral not initialized)\n
|
||||
* 1 : Init done (peripheral initialized and ready to use. HAL I2C Init function called)\n
|
||||
* b4 (not used)\n
|
||||
* x : Should be set to 0\n
|
||||
* b3\n
|
||||
* 0 : Ready or Busy (No Listen mode ongoing)\n
|
||||
* 1 : Listen (peripheral in Address Listen Mode)\n
|
||||
* b2 Intrinsic process state\n
|
||||
* 0 : Ready\n
|
||||
* 1 : Busy (peripheral busy with some configuration or internal operations)\n
|
||||
* b1 Rx state\n
|
||||
* 0 : Ready (no Rx operation ongoing)\n
|
||||
* 1 : Busy (Rx operation ongoing)\n
|
||||
* b0 Tx state\n
|
||||
* 0 : Ready (no Tx operation ongoing)\n
|
||||
* 1 : Busy (Tx operation ongoing)
|
||||
* @{
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_I2C_STATE_RESET = 0x00U, /*!< Peripheral is not yet Initialized */
|
||||
HAL_I2C_STATE_READY = 0x20U, /*!< Peripheral Initialized and ready for use */
|
||||
HAL_I2C_STATE_BUSY = 0x24U, /*!< An internal process is ongoing */
|
||||
HAL_I2C_STATE_BUSY_TX = 0x21U, /*!< Data Transmission process is ongoing */
|
||||
HAL_I2C_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing */
|
||||
HAL_I2C_STATE_LISTEN = 0x28U, /*!< Address Listen Mode is ongoing */
|
||||
HAL_I2C_STATE_BUSY_TX_LISTEN = 0x29U, /*!< Address Listen Mode and Data Transmission
|
||||
process is ongoing */
|
||||
HAL_I2C_STATE_BUSY_RX_LISTEN = 0x2AU, /*!< Address Listen Mode and Data Reception
|
||||
process is ongoing */
|
||||
HAL_I2C_STATE_ABORT = 0x60U, /*!< Abort user request ongoing */
|
||||
HAL_I2C_STATE_TIMEOUT = 0xA0U, /*!< Timeout state */
|
||||
HAL_I2C_STATE_ERROR = 0xE0U /*!< Error */
|
||||
|
||||
} HAL_I2C_StateTypeDef;
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup HAL_mode_structure_definition HAL mode structure definition
|
||||
* @brief HAL Mode structure definition
|
||||
* @note HAL I2C Mode value coding follow below described bitmap :\n
|
||||
* b7 (not used)\n
|
||||
* x : Should be set to 0\n
|
||||
* b6\n
|
||||
* 0 : None\n
|
||||
* 1 : Memory (HAL I2C communication is in Memory Mode)\n
|
||||
* b5\n
|
||||
* 0 : None\n
|
||||
* 1 : Slave (HAL I2C communication is in Slave Mode)\n
|
||||
* b4\n
|
||||
* 0 : None\n
|
||||
* 1 : Master (HAL I2C communication is in Master Mode)\n
|
||||
* b3-b2-b1-b0 (not used)\n
|
||||
* xxxx : Should be set to 0000
|
||||
* @{
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_I2C_MODE_NONE = 0x00U, /*!< No I2C communication on going */
|
||||
HAL_I2C_MODE_MASTER = 0x10U, /*!< I2C communication is in Master Mode */
|
||||
HAL_I2C_MODE_SLAVE = 0x20U, /*!< I2C communication is in Slave Mode */
|
||||
HAL_I2C_MODE_MEM = 0x40U /*!< I2C communication is in Memory Mode */
|
||||
|
||||
} HAL_I2C_ModeTypeDef;
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup I2C_Error_Code_definition I2C Error Code definition
|
||||
* @brief I2C Error Code definition
|
||||
* @{
|
||||
*/
|
||||
#define HAL_I2C_ERROR_NONE (0x00000000U) /*!< No error */
|
||||
#define HAL_I2C_ERROR_BERR (0x00000001U) /*!< BERR error */
|
||||
#define HAL_I2C_ERROR_ARLO (0x00000002U) /*!< ARLO error */
|
||||
#define HAL_I2C_ERROR_AF (0x00000004U) /*!< ACKF error */
|
||||
#define HAL_I2C_ERROR_OVR (0x00000008U) /*!< OVR error */
|
||||
#define HAL_I2C_ERROR_DMA (0x00000010U) /*!< DMA transfer error */
|
||||
#define HAL_I2C_ERROR_TIMEOUT (0x00000020U) /*!< Timeout error */
|
||||
#define HAL_I2C_ERROR_SIZE (0x00000040U) /*!< Size Management error */
|
||||
#define HAL_I2C_ERROR_DMA_PARAM (0x00000080U) /*!< DMA Parameter Error */
|
||||
#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
|
||||
#define HAL_I2C_ERROR_INVALID_CALLBACK (0x00000100U) /*!< Invalid Callback error */
|
||||
#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
|
||||
#define HAL_I2C_ERROR_INVALID_PARAM (0x00000200U) /*!< Invalid Parameters error */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup I2C_handle_Structure_definition I2C handle Structure definition
|
||||
* @brief I2C handle Structure definition
|
||||
* @{
|
||||
*/
|
||||
typedef struct __I2C_HandleTypeDef
|
||||
{
|
||||
I2C_TypeDef *Instance; /*!< I2C registers base address */
|
||||
|
||||
I2C_InitTypeDef Init; /*!< I2C communication parameters */
|
||||
|
||||
uint8_t *pBuffPtr; /*!< Pointer to I2C transfer buffer */
|
||||
|
||||
uint16_t XferSize; /*!< I2C transfer size */
|
||||
|
||||
__IO uint16_t XferCount; /*!< I2C transfer counter */
|
||||
|
||||
__IO uint32_t XferOptions; /*!< I2C sequantial transfer options, this parameter can
|
||||
be a value of @ref I2C_XFEROPTIONS */
|
||||
|
||||
__IO uint32_t PreviousState; /*!< I2C communication Previous state */
|
||||
|
||||
HAL_StatusTypeDef(*XferISR)(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources);
|
||||
/*!< I2C transfer IRQ handler function pointer */
|
||||
|
||||
DMA_HandleTypeDef *hdmatx; /*!< I2C Tx DMA handle parameters */
|
||||
|
||||
DMA_HandleTypeDef *hdmarx; /*!< I2C Rx DMA handle parameters */
|
||||
|
||||
HAL_LockTypeDef Lock; /*!< I2C locking object */
|
||||
|
||||
__IO HAL_I2C_StateTypeDef State; /*!< I2C communication state */
|
||||
|
||||
__IO HAL_I2C_ModeTypeDef Mode; /*!< I2C communication mode */
|
||||
|
||||
__IO uint32_t ErrorCode; /*!< I2C Error code */
|
||||
|
||||
__IO uint32_t AddrEventCount; /*!< I2C Address Event counter */
|
||||
|
||||
#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
|
||||
void (* MasterTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c);
|
||||
/*!< I2C Master Tx Transfer completed callback */
|
||||
void (* MasterRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c);
|
||||
/*!< I2C Master Rx Transfer completed callback */
|
||||
void (* SlaveTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c);
|
||||
/*!< I2C Slave Tx Transfer completed callback */
|
||||
void (* SlaveRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c);
|
||||
/*!< I2C Slave Rx Transfer completed callback */
|
||||
void (* ListenCpltCallback)(struct __I2C_HandleTypeDef *hi2c);
|
||||
/*!< I2C Listen Complete callback */
|
||||
void (* MemTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c);
|
||||
/*!< I2C Memory Tx Transfer completed callback */
|
||||
void (* MemRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c);
|
||||
/*!< I2C Memory Rx Transfer completed callback */
|
||||
void (* ErrorCallback)(struct __I2C_HandleTypeDef *hi2c);
|
||||
/*!< I2C Error callback */
|
||||
void (* AbortCpltCallback)(struct __I2C_HandleTypeDef *hi2c);
|
||||
/*!< I2C Abort callback */
|
||||
|
||||
void (* AddrCallback)(struct __I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode);
|
||||
/*!< I2C Slave Address Match callback */
|
||||
|
||||
void (* MspInitCallback)(struct __I2C_HandleTypeDef *hi2c);
|
||||
/*!< I2C Msp Init callback */
|
||||
void (* MspDeInitCallback)(struct __I2C_HandleTypeDef *hi2c);
|
||||
/*!< I2C Msp DeInit callback */
|
||||
|
||||
#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
|
||||
} I2C_HandleTypeDef;
|
||||
|
||||
#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
|
||||
/**
|
||||
* @brief HAL I2C Callback ID enumeration definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_I2C_MASTER_TX_COMPLETE_CB_ID = 0x00U, /*!< I2C Master Tx Transfer completed callback ID */
|
||||
HAL_I2C_MASTER_RX_COMPLETE_CB_ID = 0x01U, /*!< I2C Master Rx Transfer completed callback ID */
|
||||
HAL_I2C_SLAVE_TX_COMPLETE_CB_ID = 0x02U, /*!< I2C Slave Tx Transfer completed callback ID */
|
||||
HAL_I2C_SLAVE_RX_COMPLETE_CB_ID = 0x03U, /*!< I2C Slave Rx Transfer completed callback ID */
|
||||
HAL_I2C_LISTEN_COMPLETE_CB_ID = 0x04U, /*!< I2C Listen Complete callback ID */
|
||||
HAL_I2C_MEM_TX_COMPLETE_CB_ID = 0x05U, /*!< I2C Memory Tx Transfer callback ID */
|
||||
HAL_I2C_MEM_RX_COMPLETE_CB_ID = 0x06U, /*!< I2C Memory Rx Transfer completed callback ID */
|
||||
HAL_I2C_ERROR_CB_ID = 0x07U, /*!< I2C Error callback ID */
|
||||
HAL_I2C_ABORT_CB_ID = 0x08U, /*!< I2C Abort callback ID */
|
||||
|
||||
HAL_I2C_MSPINIT_CB_ID = 0x09U, /*!< I2C Msp Init callback ID */
|
||||
HAL_I2C_MSPDEINIT_CB_ID = 0x0AU /*!< I2C Msp DeInit callback ID */
|
||||
|
||||
} HAL_I2C_CallbackIDTypeDef;
|
||||
|
||||
/**
|
||||
* @brief HAL I2C Callback pointer definition
|
||||
*/
|
||||
typedef void (*pI2C_CallbackTypeDef)(I2C_HandleTypeDef *hi2c);
|
||||
/*!< pointer to an I2C callback function */
|
||||
typedef void (*pI2C_AddrCallbackTypeDef)(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection,
|
||||
uint16_t AddrMatchCode);
|
||||
/*!< pointer to an I2C Address Match callback function */
|
||||
|
||||
#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
|
||||
/** @defgroup I2C_Exported_Constants I2C Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup I2C_XFEROPTIONS I2C Sequential Transfer Options
|
||||
* @{
|
||||
*/
|
||||
#define I2C_FIRST_FRAME ((uint32_t)I2C_SOFTEND_MODE)
|
||||
#define I2C_FIRST_AND_NEXT_FRAME ((uint32_t)(I2C_RELOAD_MODE | I2C_SOFTEND_MODE))
|
||||
#define I2C_NEXT_FRAME ((uint32_t)(I2C_RELOAD_MODE | I2C_SOFTEND_MODE))
|
||||
#define I2C_FIRST_AND_LAST_FRAME ((uint32_t)I2C_AUTOEND_MODE)
|
||||
#define I2C_LAST_FRAME ((uint32_t)I2C_AUTOEND_MODE)
|
||||
#define I2C_LAST_FRAME_NO_STOP ((uint32_t)I2C_SOFTEND_MODE)
|
||||
|
||||
/* List of XferOptions in usage of :
|
||||
* 1- Restart condition in all use cases (direction change or not)
|
||||
*/
|
||||
#define I2C_OTHER_FRAME (0x000000AAU)
|
||||
#define I2C_OTHER_AND_LAST_FRAME (0x0000AA00U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup I2C_ADDRESSING_MODE I2C Addressing Mode
|
||||
* @{
|
||||
*/
|
||||
#define I2C_ADDRESSINGMODE_7BIT (0x00000001U)
|
||||
#define I2C_ADDRESSINGMODE_10BIT (0x00000002U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup I2C_DUAL_ADDRESSING_MODE I2C Dual Addressing Mode
|
||||
* @{
|
||||
*/
|
||||
#define I2C_DUALADDRESS_DISABLE (0x00000000U)
|
||||
#define I2C_DUALADDRESS_ENABLE I2C_OAR2_OA2EN
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup I2C_OWN_ADDRESS2_MASKS I2C Own Address2 Masks
|
||||
* @{
|
||||
*/
|
||||
#define I2C_OA2_NOMASK ((uint8_t)0x00U)
|
||||
#define I2C_OA2_MASK01 ((uint8_t)0x01U)
|
||||
#define I2C_OA2_MASK02 ((uint8_t)0x02U)
|
||||
#define I2C_OA2_MASK03 ((uint8_t)0x03U)
|
||||
#define I2C_OA2_MASK04 ((uint8_t)0x04U)
|
||||
#define I2C_OA2_MASK05 ((uint8_t)0x05U)
|
||||
#define I2C_OA2_MASK06 ((uint8_t)0x06U)
|
||||
#define I2C_OA2_MASK07 ((uint8_t)0x07U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup I2C_GENERAL_CALL_ADDRESSING_MODE I2C General Call Addressing Mode
|
||||
* @{
|
||||
*/
|
||||
#define I2C_GENERALCALL_DISABLE (0x00000000U)
|
||||
#define I2C_GENERALCALL_ENABLE I2C_CR1_GCEN
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup I2C_NOSTRETCH_MODE I2C No-Stretch Mode
|
||||
* @{
|
||||
*/
|
||||
#define I2C_NOSTRETCH_DISABLE (0x00000000U)
|
||||
#define I2C_NOSTRETCH_ENABLE I2C_CR1_NOSTRETCH
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup I2C_MEMORY_ADDRESS_SIZE I2C Memory Address Size
|
||||
* @{
|
||||
*/
|
||||
#define I2C_MEMADD_SIZE_8BIT (0x00000001U)
|
||||
#define I2C_MEMADD_SIZE_16BIT (0x00000002U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup I2C_XFERDIRECTION I2C Transfer Direction Master Point of View
|
||||
* @{
|
||||
*/
|
||||
#define I2C_DIRECTION_TRANSMIT (0x00000000U)
|
||||
#define I2C_DIRECTION_RECEIVE (0x00000001U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup I2C_RELOAD_END_MODE I2C Reload End Mode
|
||||
* @{
|
||||
*/
|
||||
#define I2C_RELOAD_MODE I2C_CR2_RELOAD
|
||||
#define I2C_AUTOEND_MODE I2C_CR2_AUTOEND
|
||||
#define I2C_SOFTEND_MODE (0x00000000U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup I2C_START_STOP_MODE I2C Start or Stop Mode
|
||||
* @{
|
||||
*/
|
||||
#define I2C_NO_STARTSTOP (0x00000000U)
|
||||
#define I2C_GENERATE_STOP (uint32_t)(0x80000000U | I2C_CR2_STOP)
|
||||
#define I2C_GENERATE_START_READ (uint32_t)(0x80000000U | I2C_CR2_START | I2C_CR2_RD_WRN)
|
||||
#define I2C_GENERATE_START_WRITE (uint32_t)(0x80000000U | I2C_CR2_START)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup I2C_Interrupt_configuration_definition I2C Interrupt configuration definition
|
||||
* @brief I2C Interrupt definition
|
||||
* Elements values convention: 0xXXXXXXXX
|
||||
* - XXXXXXXX : Interrupt control mask
|
||||
* @{
|
||||
*/
|
||||
#define I2C_IT_ERRI I2C_CR1_ERRIE
|
||||
#define I2C_IT_TCI I2C_CR1_TCIE
|
||||
#define I2C_IT_STOPI I2C_CR1_STOPIE
|
||||
#define I2C_IT_NACKI I2C_CR1_NACKIE
|
||||
#define I2C_IT_ADDRI I2C_CR1_ADDRIE
|
||||
#define I2C_IT_RXI I2C_CR1_RXIE
|
||||
#define I2C_IT_TXI I2C_CR1_TXIE
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup I2C_Flag_definition I2C Flag definition
|
||||
* @{
|
||||
*/
|
||||
#define I2C_FLAG_TXE I2C_ISR_TXE
|
||||
#define I2C_FLAG_TXIS I2C_ISR_TXIS
|
||||
#define I2C_FLAG_RXNE I2C_ISR_RXNE
|
||||
#define I2C_FLAG_ADDR I2C_ISR_ADDR
|
||||
#define I2C_FLAG_AF I2C_ISR_NACKF
|
||||
#define I2C_FLAG_STOPF I2C_ISR_STOPF
|
||||
#define I2C_FLAG_TC I2C_ISR_TC
|
||||
#define I2C_FLAG_TCR I2C_ISR_TCR
|
||||
#define I2C_FLAG_BERR I2C_ISR_BERR
|
||||
#define I2C_FLAG_ARLO I2C_ISR_ARLO
|
||||
#define I2C_FLAG_OVR I2C_ISR_OVR
|
||||
#define I2C_FLAG_PECERR I2C_ISR_PECERR
|
||||
#define I2C_FLAG_TIMEOUT I2C_ISR_TIMEOUT
|
||||
#define I2C_FLAG_ALERT I2C_ISR_ALERT
|
||||
#define I2C_FLAG_BUSY I2C_ISR_BUSY
|
||||
#define I2C_FLAG_DIR I2C_ISR_DIR
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macros -----------------------------------------------------------*/
|
||||
|
||||
/** @defgroup I2C_Exported_Macros I2C Exported Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @brief Reset I2C handle state.
|
||||
* @param __HANDLE__ specifies the I2C Handle.
|
||||
* @retval None
|
||||
*/
|
||||
#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
|
||||
#define __HAL_I2C_RESET_HANDLE_STATE(__HANDLE__) do{ \
|
||||
(__HANDLE__)->State = HAL_I2C_STATE_RESET; \
|
||||
(__HANDLE__)->MspInitCallback = NULL; \
|
||||
(__HANDLE__)->MspDeInitCallback = NULL; \
|
||||
} while(0)
|
||||
#else
|
||||
#define __HAL_I2C_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_I2C_STATE_RESET)
|
||||
#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
|
||||
|
||||
/** @brief Enable the specified I2C interrupt.
|
||||
* @param __HANDLE__ specifies the I2C Handle.
|
||||
* @param __INTERRUPT__ specifies the interrupt source to enable.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg @ref I2C_IT_ERRI Errors interrupt enable
|
||||
* @arg @ref I2C_IT_TCI Transfer complete interrupt enable
|
||||
* @arg @ref I2C_IT_STOPI STOP detection interrupt enable
|
||||
* @arg @ref I2C_IT_NACKI NACK received interrupt enable
|
||||
* @arg @ref I2C_IT_ADDRI Address match interrupt enable
|
||||
* @arg @ref I2C_IT_RXI RX interrupt enable
|
||||
* @arg @ref I2C_IT_TXI TX interrupt enable
|
||||
*
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_I2C_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 |= (__INTERRUPT__))
|
||||
|
||||
/** @brief Disable the specified I2C interrupt.
|
||||
* @param __HANDLE__ specifies the I2C Handle.
|
||||
* @param __INTERRUPT__ specifies the interrupt source to disable.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg @ref I2C_IT_ERRI Errors interrupt enable
|
||||
* @arg @ref I2C_IT_TCI Transfer complete interrupt enable
|
||||
* @arg @ref I2C_IT_STOPI STOP detection interrupt enable
|
||||
* @arg @ref I2C_IT_NACKI NACK received interrupt enable
|
||||
* @arg @ref I2C_IT_ADDRI Address match interrupt enable
|
||||
* @arg @ref I2C_IT_RXI RX interrupt enable
|
||||
* @arg @ref I2C_IT_TXI TX interrupt enable
|
||||
*
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_I2C_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 &= (~(__INTERRUPT__)))
|
||||
|
||||
/** @brief Check whether the specified I2C interrupt source is enabled or not.
|
||||
* @param __HANDLE__ specifies the I2C Handle.
|
||||
* @param __INTERRUPT__ specifies the I2C interrupt source to check.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg @ref I2C_IT_ERRI Errors interrupt enable
|
||||
* @arg @ref I2C_IT_TCI Transfer complete interrupt enable
|
||||
* @arg @ref I2C_IT_STOPI STOP detection interrupt enable
|
||||
* @arg @ref I2C_IT_NACKI NACK received interrupt enable
|
||||
* @arg @ref I2C_IT_ADDRI Address match interrupt enable
|
||||
* @arg @ref I2C_IT_RXI RX interrupt enable
|
||||
* @arg @ref I2C_IT_TXI TX interrupt enable
|
||||
*
|
||||
* @retval The new state of __INTERRUPT__ (SET or RESET).
|
||||
*/
|
||||
#define __HAL_I2C_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR1 & \
|
||||
(__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
|
||||
|
||||
/** @brief Check whether the specified I2C flag is set or not.
|
||||
* @param __HANDLE__ specifies the I2C Handle.
|
||||
* @param __FLAG__ specifies the flag to check.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg @ref I2C_FLAG_TXE Transmit data register empty
|
||||
* @arg @ref I2C_FLAG_TXIS Transmit interrupt status
|
||||
* @arg @ref I2C_FLAG_RXNE Receive data register not empty
|
||||
* @arg @ref I2C_FLAG_ADDR Address matched (slave mode)
|
||||
* @arg @ref I2C_FLAG_AF Acknowledge failure received flag
|
||||
* @arg @ref I2C_FLAG_STOPF STOP detection flag
|
||||
* @arg @ref I2C_FLAG_TC Transfer complete (master mode)
|
||||
* @arg @ref I2C_FLAG_TCR Transfer complete reload
|
||||
* @arg @ref I2C_FLAG_BERR Bus error
|
||||
* @arg @ref I2C_FLAG_ARLO Arbitration lost
|
||||
* @arg @ref I2C_FLAG_OVR Overrun/Underrun
|
||||
* @arg @ref I2C_FLAG_PECERR PEC error in reception
|
||||
* @arg @ref I2C_FLAG_TIMEOUT Timeout or Tlow detection flag
|
||||
* @arg @ref I2C_FLAG_ALERT SMBus alert
|
||||
* @arg @ref I2C_FLAG_BUSY Bus busy
|
||||
* @arg @ref I2C_FLAG_DIR Transfer direction (slave mode)
|
||||
*
|
||||
* @retval The new state of __FLAG__ (SET or RESET).
|
||||
*/
|
||||
#define I2C_FLAG_MASK (0x0001FFFFU)
|
||||
#define __HAL_I2C_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & \
|
||||
(__FLAG__)) == (__FLAG__)) ? SET : RESET)
|
||||
|
||||
/** @brief Clear the I2C pending flags which are cleared by writing 1 in a specific bit.
|
||||
* @param __HANDLE__ specifies the I2C Handle.
|
||||
* @param __FLAG__ specifies the flag to clear.
|
||||
* This parameter can be any combination of the following values:
|
||||
* @arg @ref I2C_FLAG_TXE Transmit data register empty
|
||||
* @arg @ref I2C_FLAG_ADDR Address matched (slave mode)
|
||||
* @arg @ref I2C_FLAG_AF Acknowledge failure received flag
|
||||
* @arg @ref I2C_FLAG_STOPF STOP detection flag
|
||||
* @arg @ref I2C_FLAG_BERR Bus error
|
||||
* @arg @ref I2C_FLAG_ARLO Arbitration lost
|
||||
* @arg @ref I2C_FLAG_OVR Overrun/Underrun
|
||||
* @arg @ref I2C_FLAG_PECERR PEC error in reception
|
||||
* @arg @ref I2C_FLAG_TIMEOUT Timeout or Tlow detection flag
|
||||
* @arg @ref I2C_FLAG_ALERT SMBus alert
|
||||
*
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_I2C_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__FLAG__) == I2C_FLAG_TXE) ? \
|
||||
((__HANDLE__)->Instance->ISR |= (__FLAG__)) : \
|
||||
((__HANDLE__)->Instance->ICR = (__FLAG__)))
|
||||
|
||||
/** @brief Enable the specified I2C peripheral.
|
||||
* @param __HANDLE__ specifies the I2C Handle.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_I2C_ENABLE(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE))
|
||||
|
||||
/** @brief Disable the specified I2C peripheral.
|
||||
* @param __HANDLE__ specifies the I2C Handle.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_I2C_DISABLE(__HANDLE__) (CLEAR_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE))
|
||||
|
||||
/** @brief Generate a Non-Acknowledge I2C peripheral in Slave mode.
|
||||
* @param __HANDLE__ specifies the I2C Handle.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_I2C_GENERATE_NACK(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR2, I2C_CR2_NACK))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Include I2C HAL Extended module */
|
||||
#include "stm32f7xx_hal_i2c_ex.h"
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup I2C_Exported_Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup I2C_Exported_Functions_Group1 Initialization and de-initialization functions
|
||||
* @{
|
||||
*/
|
||||
/* Initialization and de-initialization functions******************************/
|
||||
HAL_StatusTypeDef HAL_I2C_Init(I2C_HandleTypeDef *hi2c);
|
||||
HAL_StatusTypeDef HAL_I2C_DeInit(I2C_HandleTypeDef *hi2c);
|
||||
void HAL_I2C_MspInit(I2C_HandleTypeDef *hi2c);
|
||||
void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hi2c);
|
||||
|
||||
/* Callbacks Register/UnRegister functions ***********************************/
|
||||
#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
|
||||
HAL_StatusTypeDef HAL_I2C_RegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID,
|
||||
pI2C_CallbackTypeDef pCallback);
|
||||
HAL_StatusTypeDef HAL_I2C_UnRegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID);
|
||||
|
||||
HAL_StatusTypeDef HAL_I2C_RegisterAddrCallback(I2C_HandleTypeDef *hi2c, pI2C_AddrCallbackTypeDef pCallback);
|
||||
HAL_StatusTypeDef HAL_I2C_UnRegisterAddrCallback(I2C_HandleTypeDef *hi2c);
|
||||
#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup I2C_Exported_Functions_Group2 Input and Output operation functions
|
||||
* @{
|
||||
*/
|
||||
/* IO operation functions ****************************************************/
|
||||
/******* Blocking mode: Polling */
|
||||
HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData,
|
||||
uint16_t Size, uint32_t Timeout);
|
||||
HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData,
|
||||
uint16_t Size, uint32_t Timeout);
|
||||
HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size,
|
||||
uint32_t Timeout);
|
||||
HAL_StatusTypeDef HAL_I2C_Slave_Receive(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size,
|
||||
uint32_t Timeout);
|
||||
HAL_StatusTypeDef HAL_I2C_Mem_Write(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress,
|
||||
uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout);
|
||||
HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress,
|
||||
uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout);
|
||||
HAL_StatusTypeDef HAL_I2C_IsDeviceReady(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Trials,
|
||||
uint32_t Timeout);
|
||||
|
||||
/******* Non-Blocking mode: Interrupt */
|
||||
HAL_StatusTypeDef HAL_I2C_Master_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData,
|
||||
uint16_t Size);
|
||||
HAL_StatusTypeDef HAL_I2C_Master_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData,
|
||||
uint16_t Size);
|
||||
HAL_StatusTypeDef HAL_I2C_Slave_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
|
||||
HAL_StatusTypeDef HAL_I2C_Slave_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
|
||||
HAL_StatusTypeDef HAL_I2C_Mem_Write_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress,
|
||||
uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
|
||||
HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress,
|
||||
uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
|
||||
|
||||
HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData,
|
||||
uint16_t Size, uint32_t XferOptions);
|
||||
HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData,
|
||||
uint16_t Size, uint32_t XferOptions);
|
||||
HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size,
|
||||
uint32_t XferOptions);
|
||||
HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size,
|
||||
uint32_t XferOptions);
|
||||
HAL_StatusTypeDef HAL_I2C_EnableListen_IT(I2C_HandleTypeDef *hi2c);
|
||||
HAL_StatusTypeDef HAL_I2C_DisableListen_IT(I2C_HandleTypeDef *hi2c);
|
||||
HAL_StatusTypeDef HAL_I2C_Master_Abort_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress);
|
||||
|
||||
/******* Non-Blocking mode: DMA */
|
||||
HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData,
|
||||
uint16_t Size);
|
||||
HAL_StatusTypeDef HAL_I2C_Master_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData,
|
||||
uint16_t Size);
|
||||
HAL_StatusTypeDef HAL_I2C_Slave_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
|
||||
HAL_StatusTypeDef HAL_I2C_Slave_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
|
||||
HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress,
|
||||
uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
|
||||
HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress,
|
||||
uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
|
||||
|
||||
HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData,
|
||||
uint16_t Size, uint32_t XferOptions);
|
||||
HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData,
|
||||
uint16_t Size, uint32_t XferOptions);
|
||||
HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size,
|
||||
uint32_t XferOptions);
|
||||
HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size,
|
||||
uint32_t XferOptions);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup I2C_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks
|
||||
* @{
|
||||
*/
|
||||
/******* I2C IRQHandler and Callbacks used in non blocking modes (Interrupt and DMA) */
|
||||
void HAL_I2C_EV_IRQHandler(I2C_HandleTypeDef *hi2c);
|
||||
void HAL_I2C_ER_IRQHandler(I2C_HandleTypeDef *hi2c);
|
||||
void HAL_I2C_MasterTxCpltCallback(I2C_HandleTypeDef *hi2c);
|
||||
void HAL_I2C_MasterRxCpltCallback(I2C_HandleTypeDef *hi2c);
|
||||
void HAL_I2C_SlaveTxCpltCallback(I2C_HandleTypeDef *hi2c);
|
||||
void HAL_I2C_SlaveRxCpltCallback(I2C_HandleTypeDef *hi2c);
|
||||
void HAL_I2C_AddrCallback(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode);
|
||||
void HAL_I2C_ListenCpltCallback(I2C_HandleTypeDef *hi2c);
|
||||
void HAL_I2C_MemTxCpltCallback(I2C_HandleTypeDef *hi2c);
|
||||
void HAL_I2C_MemRxCpltCallback(I2C_HandleTypeDef *hi2c);
|
||||
void HAL_I2C_ErrorCallback(I2C_HandleTypeDef *hi2c);
|
||||
void HAL_I2C_AbortCpltCallback(I2C_HandleTypeDef *hi2c);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup I2C_Exported_Functions_Group3 Peripheral State, Mode and Error functions
|
||||
* @{
|
||||
*/
|
||||
/* Peripheral State, Mode and Error functions *********************************/
|
||||
HAL_I2C_StateTypeDef HAL_I2C_GetState(I2C_HandleTypeDef *hi2c);
|
||||
HAL_I2C_ModeTypeDef HAL_I2C_GetMode(I2C_HandleTypeDef *hi2c);
|
||||
uint32_t HAL_I2C_GetError(I2C_HandleTypeDef *hi2c);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/** @defgroup I2C_Private_Constants I2C Private Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup I2C_Private_Macro I2C Private Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
#define IS_I2C_ADDRESSING_MODE(MODE) (((MODE) == I2C_ADDRESSINGMODE_7BIT) || \
|
||||
((MODE) == I2C_ADDRESSINGMODE_10BIT))
|
||||
|
||||
#define IS_I2C_DUAL_ADDRESS(ADDRESS) (((ADDRESS) == I2C_DUALADDRESS_DISABLE) || \
|
||||
((ADDRESS) == I2C_DUALADDRESS_ENABLE))
|
||||
|
||||
#define IS_I2C_OWN_ADDRESS2_MASK(MASK) (((MASK) == I2C_OA2_NOMASK) || \
|
||||
((MASK) == I2C_OA2_MASK01) || \
|
||||
((MASK) == I2C_OA2_MASK02) || \
|
||||
((MASK) == I2C_OA2_MASK03) || \
|
||||
((MASK) == I2C_OA2_MASK04) || \
|
||||
((MASK) == I2C_OA2_MASK05) || \
|
||||
((MASK) == I2C_OA2_MASK06) || \
|
||||
((MASK) == I2C_OA2_MASK07))
|
||||
|
||||
#define IS_I2C_GENERAL_CALL(CALL) (((CALL) == I2C_GENERALCALL_DISABLE) || \
|
||||
((CALL) == I2C_GENERALCALL_ENABLE))
|
||||
|
||||
#define IS_I2C_NO_STRETCH(STRETCH) (((STRETCH) == I2C_NOSTRETCH_DISABLE) || \
|
||||
((STRETCH) == I2C_NOSTRETCH_ENABLE))
|
||||
|
||||
#define IS_I2C_MEMADD_SIZE(SIZE) (((SIZE) == I2C_MEMADD_SIZE_8BIT) || \
|
||||
((SIZE) == I2C_MEMADD_SIZE_16BIT))
|
||||
|
||||
#define IS_TRANSFER_MODE(MODE) (((MODE) == I2C_RELOAD_MODE) || \
|
||||
((MODE) == I2C_AUTOEND_MODE) || \
|
||||
((MODE) == I2C_SOFTEND_MODE))
|
||||
|
||||
#define IS_TRANSFER_REQUEST(REQUEST) (((REQUEST) == I2C_GENERATE_STOP) || \
|
||||
((REQUEST) == I2C_GENERATE_START_READ) || \
|
||||
((REQUEST) == I2C_GENERATE_START_WRITE) || \
|
||||
((REQUEST) == I2C_NO_STARTSTOP))
|
||||
|
||||
#define IS_I2C_TRANSFER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == I2C_FIRST_FRAME) || \
|
||||
((REQUEST) == I2C_FIRST_AND_NEXT_FRAME) || \
|
||||
((REQUEST) == I2C_NEXT_FRAME) || \
|
||||
((REQUEST) == I2C_FIRST_AND_LAST_FRAME) || \
|
||||
((REQUEST) == I2C_LAST_FRAME) || \
|
||||
((REQUEST) == I2C_LAST_FRAME_NO_STOP) || \
|
||||
IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST))
|
||||
|
||||
#define IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == I2C_OTHER_FRAME) || \
|
||||
((REQUEST) == I2C_OTHER_AND_LAST_FRAME))
|
||||
|
||||
#define I2C_RESET_CR2(__HANDLE__) ((__HANDLE__)->Instance->CR2 &= \
|
||||
(uint32_t)~((uint32_t)(I2C_CR2_SADD | I2C_CR2_HEAD10R | \
|
||||
I2C_CR2_NBYTES | I2C_CR2_RELOAD | \
|
||||
I2C_CR2_RD_WRN)))
|
||||
|
||||
#define I2C_GET_ADDR_MATCH(__HANDLE__) ((uint16_t)(((__HANDLE__)->Instance->ISR & I2C_ISR_ADDCODE) \
|
||||
>> 16U))
|
||||
#define I2C_GET_DIR(__HANDLE__) ((uint8_t)(((__HANDLE__)->Instance->ISR & I2C_ISR_DIR) \
|
||||
>> 16U))
|
||||
#define I2C_GET_STOP_MODE(__HANDLE__) ((__HANDLE__)->Instance->CR2 & I2C_CR2_AUTOEND)
|
||||
#define I2C_GET_OWN_ADDRESS1(__HANDLE__) ((uint16_t)((__HANDLE__)->Instance->OAR1 & I2C_OAR1_OA1))
|
||||
#define I2C_GET_OWN_ADDRESS2(__HANDLE__) ((uint16_t)((__HANDLE__)->Instance->OAR2 & I2C_OAR2_OA2))
|
||||
|
||||
#define IS_I2C_OWN_ADDRESS1(ADDRESS1) ((ADDRESS1) <= 0x000003FFU)
|
||||
#define IS_I2C_OWN_ADDRESS2(ADDRESS2) ((ADDRESS2) <= (uint16_t)0x00FFU)
|
||||
|
||||
#define I2C_MEM_ADD_MSB(__ADDRESS__) ((uint8_t)((uint16_t)(((uint16_t)((__ADDRESS__) & \
|
||||
(uint16_t)(0xFF00U))) >> 8U)))
|
||||
#define I2C_MEM_ADD_LSB(__ADDRESS__) ((uint8_t)((uint16_t)((__ADDRESS__) & (uint16_t)(0x00FFU))))
|
||||
|
||||
#define I2C_GENERATE_START(__ADDMODE__,__ADDRESS__) (((__ADDMODE__) == I2C_ADDRESSINGMODE_7BIT) ? \
|
||||
(uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | \
|
||||
(I2C_CR2_START) | (I2C_CR2_AUTOEND)) & \
|
||||
(~I2C_CR2_RD_WRN)) : \
|
||||
(uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | \
|
||||
(I2C_CR2_ADD10) | (I2C_CR2_START)) & \
|
||||
(~I2C_CR2_RD_WRN)))
|
||||
|
||||
#define I2C_CHECK_FLAG(__ISR__, __FLAG__) ((((__ISR__) & ((__FLAG__) & I2C_FLAG_MASK)) == \
|
||||
((__FLAG__) & I2C_FLAG_MASK)) ? SET : RESET)
|
||||
#define I2C_CHECK_IT_SOURCE(__CR1__, __IT__) ((((__CR1__) & (__IT__)) == (__IT__)) ? SET : RESET)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private Functions ---------------------------------------------------------*/
|
||||
/** @defgroup I2C_Private_Functions I2C Private Functions
|
||||
* @{
|
||||
*/
|
||||
/* Private functions are defined in stm32f7xx_hal_i2c.c file */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
|
||||
#endif /* STM32F7xx_HAL_I2C_H */
|
||||
@@ -0,0 +1,212 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f7xx_hal_i2c_ex.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of I2C HAL Extended module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef STM32F7xx_HAL_I2C_EX_H
|
||||
#define STM32F7xx_HAL_I2C_EX_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f7xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F7xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup I2CEx
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup I2CEx_Exported_Constants I2C Extended Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup I2CEx_Analog_Filter I2C Extended Analog Filter
|
||||
* @{
|
||||
*/
|
||||
#define I2C_ANALOGFILTER_ENABLE 0x00000000U
|
||||
#define I2C_ANALOGFILTER_DISABLE I2C_CR1_ANFOFF
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup I2CEx_FastModePlus I2C Extended Fast Mode Plus
|
||||
* @{
|
||||
*/
|
||||
#define I2C_FMP_NOT_SUPPORTED 0xAAAA0000U /*!< Fast Mode Plus not supported */
|
||||
#if defined(SYSCFG_PMC_I2C_PB6_FMP)
|
||||
#define I2C_FASTMODEPLUS_PB6 SYSCFG_PMC_I2C_PB6_FMP /*!< Enable Fast Mode Plus on PB6 */
|
||||
#define I2C_FASTMODEPLUS_PB7 SYSCFG_PMC_I2C_PB7_FMP /*!< Enable Fast Mode Plus on PB7 */
|
||||
#else
|
||||
#define I2C_FASTMODEPLUS_PB6 (uint32_t)(0x00000004U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus PB6 not supported */
|
||||
#define I2C_FASTMODEPLUS_PB7 (uint32_t)(0x00000008U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus PB7 not supported */
|
||||
#endif /* SYSCFG_PMC_I2C_PB6_FMP */
|
||||
#if defined(SYSCFG_PMC_I2C_PB8_FMP)
|
||||
#define I2C_FASTMODEPLUS_PB8 SYSCFG_PMC_I2C_PB8_FMP /*!< Enable Fast Mode Plus on PB8 */
|
||||
#define I2C_FASTMODEPLUS_PB9 SYSCFG_PMC_I2C_PB9_FMP /*!< Enable Fast Mode Plus on PB9 */
|
||||
#else
|
||||
#define I2C_FASTMODEPLUS_PB8 (uint32_t)(0x00000010U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus PB8 not supported */
|
||||
#define I2C_FASTMODEPLUS_PB9 (uint32_t)(0x00000012U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus PB9 not supported */
|
||||
#endif /* SYSCFG_PMC_I2C_PB8_FMP */
|
||||
#if defined(SYSCFG_PMC_I2C1_FMP)
|
||||
#define I2C_FASTMODEPLUS_I2C1 SYSCFG_PMC_I2C1_FMP /*!< Enable Fast Mode Plus on I2C1 pins */
|
||||
#else
|
||||
#define I2C_FASTMODEPLUS_I2C1 (uint32_t)(0x00000100U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus I2C1 not supported */
|
||||
#endif /* SYSCFG_PMC_I2C1_FMP */
|
||||
#if defined(SYSCFG_PMC_I2C2_FMP)
|
||||
#define I2C_FASTMODEPLUS_I2C2 SYSCFG_PMC_I2C2_FMP /*!< Enable Fast Mode Plus on I2C2 pins */
|
||||
#else
|
||||
#define I2C_FASTMODEPLUS_I2C2 (uint32_t)(0x00000200U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus I2C2 not supported */
|
||||
#endif /* SYSCFG_PMC_I2C2_FMP */
|
||||
#if defined(SYSCFG_PMC_I2C3_FMP)
|
||||
#define I2C_FASTMODEPLUS_I2C3 SYSCFG_PMC_I2C3_FMP /*!< Enable Fast Mode Plus on I2C3 pins */
|
||||
#else
|
||||
#define I2C_FASTMODEPLUS_I2C3 (uint32_t)(0x00000400U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus I2C3 not supported */
|
||||
#endif /* SYSCFG_PMC_I2C3_FMP */
|
||||
#if defined(SYSCFG_PMC_I2C4_FMP)
|
||||
#define I2C_FASTMODEPLUS_I2C4 SYSCFG_PMC_I2C4_FMP /*!< Enable Fast Mode Plus on I2C4 pins */
|
||||
#else
|
||||
#define I2C_FASTMODEPLUS_I2C4 (uint32_t)(0x00000800U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus I2C4 not supported */
|
||||
#endif /* SYSCFG_PMC_I2C4_FMP */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/** @defgroup I2CEx_Exported_Macros I2C Extended Exported Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup I2CEx_Exported_Functions I2C Extended Exported Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup I2CEx_Exported_Functions_Group1 Filter Mode Functions
|
||||
* @{
|
||||
*/
|
||||
/* Peripheral Control functions ************************************************/
|
||||
HAL_StatusTypeDef HAL_I2CEx_ConfigAnalogFilter(I2C_HandleTypeDef *hi2c, uint32_t AnalogFilter);
|
||||
HAL_StatusTypeDef HAL_I2CEx_ConfigDigitalFilter(I2C_HandleTypeDef *hi2c, uint32_t DigitalFilter);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#if (defined(SYSCFG_PMC_I2C_PB6_FMP) || defined(SYSCFG_PMC_I2C_PB7_FMP)) || (defined(SYSCFG_PMC_I2C_PB8_FMP) || defined(SYSCFG_PMC_I2C_PB9_FMP)) || (defined(SYSCFG_PMC_I2C1_FMP)) || (defined(SYSCFG_PMC_I2C2_FMP)) || defined(SYSCFG_PMC_I2C3_FMP) || defined(SYSCFG_PMC_I2C4_FMP)
|
||||
|
||||
/** @addtogroup I2CEx_Exported_Functions_Group3 Fast Mode Plus Functions
|
||||
* @{
|
||||
*/
|
||||
void HAL_I2CEx_EnableFastModePlus(uint32_t ConfigFastModePlus);
|
||||
void HAL_I2CEx_DisableFastModePlus(uint32_t ConfigFastModePlus);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#endif /* Fast Mode Plus Availability */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/** @defgroup I2CEx_Private_Constants I2C Extended Private Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup I2CEx_Private_Macro I2C Extended Private Macros
|
||||
* @{
|
||||
*/
|
||||
#define IS_I2C_ANALOG_FILTER(FILTER) (((FILTER) == I2C_ANALOGFILTER_ENABLE) || \
|
||||
((FILTER) == I2C_ANALOGFILTER_DISABLE))
|
||||
|
||||
#define IS_I2C_DIGITAL_FILTER(FILTER) ((FILTER) <= 0x0000000FU)
|
||||
|
||||
#if defined(SYSCFG_PMC_I2C4_FMP)
|
||||
#define IS_I2C_FASTMODEPLUS(__CONFIG__) ((((__CONFIG__) & I2C_FASTMODEPLUS_PB6) == I2C_FASTMODEPLUS_PB6) || \
|
||||
(((__CONFIG__) & I2C_FASTMODEPLUS_PB7) == I2C_FASTMODEPLUS_PB7) || \
|
||||
(((__CONFIG__) & I2C_FASTMODEPLUS_PB8) == I2C_FASTMODEPLUS_PB8) || \
|
||||
(((__CONFIG__) & I2C_FASTMODEPLUS_PB9) == I2C_FASTMODEPLUS_PB9) || \
|
||||
(((__CONFIG__) & I2C_FASTMODEPLUS_I2C1) == I2C_FASTMODEPLUS_I2C1) || \
|
||||
(((__CONFIG__) & I2C_FASTMODEPLUS_I2C2) == I2C_FASTMODEPLUS_I2C2) || \
|
||||
(((__CONFIG__) & I2C_FASTMODEPLUS_I2C3) == I2C_FASTMODEPLUS_I2C3) || \
|
||||
(((__CONFIG__) & I2C_FASTMODEPLUS_I2C4) == I2C_FASTMODEPLUS_I2C4))
|
||||
#elif defined(SYSCFG_PMC_I2C3_FMP)
|
||||
#define IS_I2C_FASTMODEPLUS(__CONFIG__) ((((__CONFIG__) & I2C_FASTMODEPLUS_PB6) == I2C_FASTMODEPLUS_PB6) || \
|
||||
(((__CONFIG__) & I2C_FASTMODEPLUS_PB7) == I2C_FASTMODEPLUS_PB7) || \
|
||||
(((__CONFIG__) & I2C_FASTMODEPLUS_PB8) == I2C_FASTMODEPLUS_PB8) || \
|
||||
(((__CONFIG__) & I2C_FASTMODEPLUS_PB9) == I2C_FASTMODEPLUS_PB9) || \
|
||||
(((__CONFIG__) & I2C_FASTMODEPLUS_I2C1) == I2C_FASTMODEPLUS_I2C1) || \
|
||||
(((__CONFIG__) & I2C_FASTMODEPLUS_I2C2) == I2C_FASTMODEPLUS_I2C2) || \
|
||||
(((__CONFIG__) & I2C_FASTMODEPLUS_I2C3) == I2C_FASTMODEPLUS_I2C3))
|
||||
#elif defined(SYSCFG_PMC_I2C2_FMP)
|
||||
#define IS_I2C_FASTMODEPLUS(__CONFIG__) ((((__CONFIG__) & I2C_FASTMODEPLUS_PB6) == I2C_FASTMODEPLUS_PB6) || \
|
||||
(((__CONFIG__) & I2C_FASTMODEPLUS_PB7) == I2C_FASTMODEPLUS_PB7) || \
|
||||
(((__CONFIG__) & I2C_FASTMODEPLUS_PB8) == I2C_FASTMODEPLUS_PB8) || \
|
||||
(((__CONFIG__) & I2C_FASTMODEPLUS_PB9) == I2C_FASTMODEPLUS_PB9) || \
|
||||
(((__CONFIG__) & I2C_FASTMODEPLUS_I2C1) == I2C_FASTMODEPLUS_I2C1) || \
|
||||
(((__CONFIG__) & I2C_FASTMODEPLUS_I2C2) == I2C_FASTMODEPLUS_I2C2))
|
||||
#elif defined(SYSCFG_PMC_I2C1_FMP)
|
||||
#define IS_I2C_FASTMODEPLUS(__CONFIG__) ((((__CONFIG__) & I2C_FASTMODEPLUS_PB6) == I2C_FASTMODEPLUS_PB6) || \
|
||||
(((__CONFIG__) & I2C_FASTMODEPLUS_PB7) == I2C_FASTMODEPLUS_PB7) || \
|
||||
(((__CONFIG__) & I2C_FASTMODEPLUS_PB8) == I2C_FASTMODEPLUS_PB8) || \
|
||||
(((__CONFIG__) & I2C_FASTMODEPLUS_PB9) == I2C_FASTMODEPLUS_PB9) || \
|
||||
(((__CONFIG__) & I2C_FASTMODEPLUS_I2C1) == I2C_FASTMODEPLUS_I2C1))
|
||||
#endif /* SYSCFG_PMC_I2C1_FMP && SYSCFG_PMC_I2C2_FMP && SYSCFG_PMC_I2C3_FMP && SYSCFG_PMC_I2C4_FMP */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private Functions ---------------------------------------------------------*/
|
||||
/** @defgroup I2CEx_Private_Functions I2C Extended Private Functions
|
||||
* @{
|
||||
*/
|
||||
/* Private functions are defined in stm32f7xx_hal_i2c_ex.c file */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* STM32F7xx_HAL_I2C_EX_H */
|
||||
@@ -0,0 +1,402 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f7xx_hal_pwr.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of PWR HAL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F7xx_HAL_PWR_H
|
||||
#define __STM32F7xx_HAL_PWR_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f7xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F7xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup PWR
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
|
||||
/** @defgroup PWR_Exported_Types PWR Exported Types
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief PWR PVD configuration structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t PVDLevel; /*!< PVDLevel: Specifies the PVD detection level.
|
||||
This parameter can be a value of @ref PWR_PVD_detection_level */
|
||||
|
||||
uint32_t Mode; /*!< Mode: Specifies the operating mode for the selected pins.
|
||||
This parameter can be a value of @ref PWR_PVD_Mode */
|
||||
}PWR_PVDTypeDef;
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup PWR_Exported_Constants PWR Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup PWR_PVD_detection_level PWR PVD detection level
|
||||
* @{
|
||||
*/
|
||||
#define PWR_PVDLEVEL_0 PWR_CR1_PLS_LEV0
|
||||
#define PWR_PVDLEVEL_1 PWR_CR1_PLS_LEV1
|
||||
#define PWR_PVDLEVEL_2 PWR_CR1_PLS_LEV2
|
||||
#define PWR_PVDLEVEL_3 PWR_CR1_PLS_LEV3
|
||||
#define PWR_PVDLEVEL_4 PWR_CR1_PLS_LEV4
|
||||
#define PWR_PVDLEVEL_5 PWR_CR1_PLS_LEV5
|
||||
#define PWR_PVDLEVEL_6 PWR_CR1_PLS_LEV6
|
||||
#define PWR_PVDLEVEL_7 PWR_CR1_PLS_LEV7/* External input analog voltage
|
||||
(Compare internally to VREFINT) */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup PWR_PVD_Mode PWR PVD Mode
|
||||
* @{
|
||||
*/
|
||||
#define PWR_PVD_MODE_NORMAL ((uint32_t)0x00000000U) /*!< basic mode is used */
|
||||
#define PWR_PVD_MODE_IT_RISING ((uint32_t)0x00010001U) /*!< External Interrupt Mode with Rising edge trigger detection */
|
||||
#define PWR_PVD_MODE_IT_FALLING ((uint32_t)0x00010002U) /*!< External Interrupt Mode with Falling edge trigger detection */
|
||||
#define PWR_PVD_MODE_IT_RISING_FALLING ((uint32_t)0x00010003U) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
|
||||
#define PWR_PVD_MODE_EVENT_RISING ((uint32_t)0x00020001U) /*!< Event Mode with Rising edge trigger detection */
|
||||
#define PWR_PVD_MODE_EVENT_FALLING ((uint32_t)0x00020002U) /*!< Event Mode with Falling edge trigger detection */
|
||||
#define PWR_PVD_MODE_EVENT_RISING_FALLING ((uint32_t)0x00020003U) /*!< Event Mode with Rising/Falling edge trigger detection */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup PWR_Regulator_state_in_STOP_mode PWR Regulator state in SLEEP/STOP mode
|
||||
* @{
|
||||
*/
|
||||
#define PWR_MAINREGULATOR_ON ((uint32_t)0x00000000U)
|
||||
#define PWR_LOWPOWERREGULATOR_ON PWR_CR1_LPDS
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup PWR_SLEEP_mode_entry PWR SLEEP mode entry
|
||||
* @{
|
||||
*/
|
||||
#define PWR_SLEEPENTRY_WFI ((uint8_t)0x01U)
|
||||
#define PWR_SLEEPENTRY_WFE ((uint8_t)0x02U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup PWR_STOP_mode_entry PWR STOP mode entry
|
||||
* @{
|
||||
*/
|
||||
#define PWR_STOPENTRY_WFI ((uint8_t)0x01U)
|
||||
#define PWR_STOPENTRY_WFE ((uint8_t)0x02U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup PWR_Regulator_Voltage_Scale PWR Regulator Voltage Scale
|
||||
* @{
|
||||
*/
|
||||
#define PWR_REGULATOR_VOLTAGE_SCALE1 PWR_CR1_VOS
|
||||
#define PWR_REGULATOR_VOLTAGE_SCALE2 PWR_CR1_VOS_1
|
||||
#define PWR_REGULATOR_VOLTAGE_SCALE3 PWR_CR1_VOS_0
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup PWR_Flag PWR Flag
|
||||
* @{
|
||||
*/
|
||||
#define PWR_FLAG_WU PWR_CSR1_WUIF
|
||||
#define PWR_FLAG_SB PWR_CSR1_SBF
|
||||
#define PWR_FLAG_PVDO PWR_CSR1_PVDO
|
||||
#define PWR_FLAG_BRR PWR_CSR1_BRR
|
||||
#define PWR_FLAG_VOSRDY PWR_CSR1_VOSRDY
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/** @defgroup PWR_Exported_Macro PWR Exported Macro
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @brief macros configure the main internal regulator output voltage.
|
||||
* @param __REGULATOR__ specifies the regulator output voltage to achieve
|
||||
* a tradeoff between performance and power consumption when the device does
|
||||
* not operate at the maximum frequency (refer to the datasheets for more details).
|
||||
* This parameter can be one of the following values:
|
||||
* @arg PWR_REGULATOR_VOLTAGE_SCALE1: Regulator voltage output Scale 1 mode
|
||||
* @arg PWR_REGULATOR_VOLTAGE_SCALE2: Regulator voltage output Scale 2 mode
|
||||
* @arg PWR_REGULATOR_VOLTAGE_SCALE3: Regulator voltage output Scale 3 mode
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_PWR_VOLTAGESCALING_CONFIG(__REGULATOR__) do { \
|
||||
__IO uint32_t tmpreg; \
|
||||
MODIFY_REG(PWR->CR1, PWR_CR1_VOS, (__REGULATOR__)); \
|
||||
/* Delay after an RCC peripheral clock enabling */ \
|
||||
tmpreg = READ_BIT(PWR->CR1, PWR_CR1_VOS); \
|
||||
UNUSED(tmpreg); \
|
||||
} while(0)
|
||||
|
||||
/** @brief Check PWR flag is set or not.
|
||||
* @param __FLAG__ specifies the flag to check.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg PWR_FLAG_WU: Wake Up flag. This flag indicates that a wakeup event
|
||||
* was received on the internal wakeup line in standby mode (RTC alarm (Alarm A or Alarm B),
|
||||
* RTC Tamper event, RTC TimeStamp event or RTC Wakeup)).
|
||||
* @arg PWR_FLAG_SB: StandBy flag. This flag indicates that the system was
|
||||
* resumed from StandBy mode.
|
||||
* @arg PWR_FLAG_PVDO: PVD Output. This flag is valid only if PVD is enabled
|
||||
* by the HAL_PWR_EnablePVD() function. The PVD is stopped by Standby mode
|
||||
* For this reason, this bit is equal to 0 after Standby or reset
|
||||
* until the PVDE bit is set.
|
||||
* @arg PWR_FLAG_BRR: Backup regulator ready flag. This bit is not reset
|
||||
* when the device wakes up from Standby mode or by a system reset
|
||||
* or power reset.
|
||||
* @arg PWR_FLAG_VOSRDY: This flag indicates that the Regulator voltage
|
||||
* scaling output selection is ready.
|
||||
* @retval The new state of __FLAG__ (TRUE or FALSE).
|
||||
*/
|
||||
#define __HAL_PWR_GET_FLAG(__FLAG__) ((PWR->CSR1 & (__FLAG__)) == (__FLAG__))
|
||||
|
||||
/** @brief Clear the PWR's pending flags.
|
||||
* @param __FLAG__ specifies the flag to clear.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg PWR_FLAG_SB: StandBy flag
|
||||
*/
|
||||
#define __HAL_PWR_CLEAR_FLAG(__FLAG__) (PWR->CR1 |= (__FLAG__) << 2)
|
||||
|
||||
/**
|
||||
* @brief Enable the PVD Exti Line 16.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_PWR_PVD_EXTI_ENABLE_IT() (EXTI->IMR |= (PWR_EXTI_LINE_PVD))
|
||||
|
||||
/**
|
||||
* @brief Disable the PVD EXTI Line 16.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_PWR_PVD_EXTI_DISABLE_IT() (EXTI->IMR &= ~(PWR_EXTI_LINE_PVD))
|
||||
|
||||
/**
|
||||
* @brief Enable event on PVD Exti Line 16.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_PWR_PVD_EXTI_ENABLE_EVENT() (EXTI->EMR |= (PWR_EXTI_LINE_PVD))
|
||||
|
||||
/**
|
||||
* @brief Disable event on PVD Exti Line 16.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_PWR_PVD_EXTI_DISABLE_EVENT() (EXTI->EMR &= ~(PWR_EXTI_LINE_PVD))
|
||||
|
||||
/**
|
||||
* @brief Enable the PVD Extended Interrupt Rising Trigger.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR, PWR_EXTI_LINE_PVD)
|
||||
|
||||
/**
|
||||
* @brief Disable the PVD Extended Interrupt Rising Trigger.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR, PWR_EXTI_LINE_PVD)
|
||||
|
||||
/**
|
||||
* @brief Enable the PVD Extended Interrupt Falling Trigger.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR, PWR_EXTI_LINE_PVD)
|
||||
|
||||
|
||||
/**
|
||||
* @brief Disable the PVD Extended Interrupt Falling Trigger.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR, PWR_EXTI_LINE_PVD)
|
||||
|
||||
|
||||
/**
|
||||
* @brief PVD EXTI line configuration: set rising & falling edge trigger.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_FALLING_EDGE() __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE();
|
||||
|
||||
/**
|
||||
* @brief Disable the PVD Extended Interrupt Rising & Falling Trigger.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_FALLING_EDGE() __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE();
|
||||
|
||||
/**
|
||||
* @brief checks whether the specified PVD Exti interrupt flag is set or not.
|
||||
* @retval EXTI PVD Line Status.
|
||||
*/
|
||||
#define __HAL_PWR_PVD_EXTI_GET_FLAG() (EXTI->PR & (PWR_EXTI_LINE_PVD))
|
||||
|
||||
/**
|
||||
* @brief Clear the PVD Exti flag.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_PWR_PVD_EXTI_CLEAR_FLAG() (EXTI->PR = (PWR_EXTI_LINE_PVD))
|
||||
|
||||
/**
|
||||
* @brief Generates a Software interrupt on PVD EXTI line.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_PWR_PVD_EXTI_GENERATE_SWIT() (EXTI->SWIER |= (PWR_EXTI_LINE_PVD))
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Include PWR HAL Extension module */
|
||||
#include "stm32f7xx_hal_pwr_ex.h"
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup PWR_Exported_Functions PWR Exported Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions
|
||||
* @{
|
||||
*/
|
||||
/* Initialization and de-initialization functions *****************************/
|
||||
void HAL_PWR_DeInit(void);
|
||||
void HAL_PWR_EnableBkUpAccess(void);
|
||||
void HAL_PWR_DisableBkUpAccess(void);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup PWR_Exported_Functions_Group2 Peripheral Control functions
|
||||
* @{
|
||||
*/
|
||||
/* Peripheral Control functions **********************************************/
|
||||
/* PVD configuration */
|
||||
void HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD);
|
||||
void HAL_PWR_EnablePVD(void);
|
||||
void HAL_PWR_DisablePVD(void);
|
||||
|
||||
/* WakeUp pins configuration */
|
||||
void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinPolarity);
|
||||
void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx);
|
||||
|
||||
/* Low Power modes entry */
|
||||
void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry);
|
||||
void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry);
|
||||
void HAL_PWR_EnterSTANDBYMode(void);
|
||||
|
||||
/* Power PVD IRQ Handler */
|
||||
void HAL_PWR_PVD_IRQHandler(void);
|
||||
void HAL_PWR_PVDCallback(void);
|
||||
|
||||
/* Cortex System Control functions *******************************************/
|
||||
void HAL_PWR_EnableSleepOnExit(void);
|
||||
void HAL_PWR_DisableSleepOnExit(void);
|
||||
void HAL_PWR_EnableSEVOnPend(void);
|
||||
void HAL_PWR_DisableSEVOnPend(void);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/** @defgroup PWR_Private_Constants PWR Private Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup PWR_PVD_EXTI_Line PWR PVD EXTI Line
|
||||
* @{
|
||||
*/
|
||||
#define PWR_EXTI_LINE_PVD ((uint32_t)EXTI_IMR_IM16) /*!< External interrupt line 16 Connected to the PVD EXTI Line */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup PWR_Private_Macros PWR Private Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup PWR_IS_PWR_Definitions PWR Private macros to check input parameters
|
||||
* @{
|
||||
*/
|
||||
#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLEVEL_0) || ((LEVEL) == PWR_PVDLEVEL_1)|| \
|
||||
((LEVEL) == PWR_PVDLEVEL_2) || ((LEVEL) == PWR_PVDLEVEL_3)|| \
|
||||
((LEVEL) == PWR_PVDLEVEL_4) || ((LEVEL) == PWR_PVDLEVEL_5)|| \
|
||||
((LEVEL) == PWR_PVDLEVEL_6) || ((LEVEL) == PWR_PVDLEVEL_7))
|
||||
#define IS_PWR_PVD_MODE(MODE) (((MODE) == PWR_PVD_MODE_IT_RISING)|| ((MODE) == PWR_PVD_MODE_IT_FALLING) || \
|
||||
((MODE) == PWR_PVD_MODE_IT_RISING_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING) || \
|
||||
((MODE) == PWR_PVD_MODE_EVENT_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING_FALLING) || \
|
||||
((MODE) == PWR_PVD_MODE_NORMAL))
|
||||
#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_ON) || \
|
||||
((REGULATOR) == PWR_LOWPOWERREGULATOR_ON))
|
||||
#define IS_PWR_SLEEP_ENTRY(ENTRY) (((ENTRY) == PWR_SLEEPENTRY_WFI) || ((ENTRY) == PWR_SLEEPENTRY_WFE))
|
||||
#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPENTRY_WFI) || ((ENTRY) == PWR_STOPENTRY_WFE))
|
||||
#define IS_PWR_REGULATOR_VOLTAGE(VOLTAGE) (((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE1) || \
|
||||
((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE2) || \
|
||||
((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE3))
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
|
||||
#endif /* __STM32F7xx_HAL_PWR_H */
|
||||
|
||||
@@ -0,0 +1,260 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f7xx_hal_pwr_ex.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of PWR HAL Extension module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F7xx_HAL_PWR_EX_H
|
||||
#define __STM32F7xx_HAL_PWR_EX_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f7xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F7xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup PWREx
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup PWREx_Exported_Constants PWREx Exported Constants
|
||||
* @{
|
||||
*/
|
||||
/** @defgroup PWREx_WakeUp_Pins PWREx Wake Up Pins
|
||||
* @{
|
||||
*/
|
||||
#define PWR_WAKEUP_PIN1 PWR_CSR2_EWUP1
|
||||
#define PWR_WAKEUP_PIN2 PWR_CSR2_EWUP2
|
||||
#define PWR_WAKEUP_PIN3 PWR_CSR2_EWUP3
|
||||
#define PWR_WAKEUP_PIN4 PWR_CSR2_EWUP4
|
||||
#define PWR_WAKEUP_PIN5 PWR_CSR2_EWUP5
|
||||
#define PWR_WAKEUP_PIN6 PWR_CSR2_EWUP6
|
||||
#define PWR_WAKEUP_PIN1_HIGH PWR_CSR2_EWUP1
|
||||
#define PWR_WAKEUP_PIN2_HIGH PWR_CSR2_EWUP2
|
||||
#define PWR_WAKEUP_PIN3_HIGH PWR_CSR2_EWUP3
|
||||
#define PWR_WAKEUP_PIN4_HIGH PWR_CSR2_EWUP4
|
||||
#define PWR_WAKEUP_PIN5_HIGH PWR_CSR2_EWUP5
|
||||
#define PWR_WAKEUP_PIN6_HIGH PWR_CSR2_EWUP6
|
||||
#define PWR_WAKEUP_PIN1_LOW (uint32_t)((PWR_CR2_WUPP1<<6) | PWR_CSR2_EWUP1)
|
||||
#define PWR_WAKEUP_PIN2_LOW (uint32_t)((PWR_CR2_WUPP2<<6) | PWR_CSR2_EWUP2)
|
||||
#define PWR_WAKEUP_PIN3_LOW (uint32_t)((PWR_CR2_WUPP3<<6) | PWR_CSR2_EWUP3)
|
||||
#define PWR_WAKEUP_PIN4_LOW (uint32_t)((PWR_CR2_WUPP4<<6) | PWR_CSR2_EWUP4)
|
||||
#define PWR_WAKEUP_PIN5_LOW (uint32_t)((PWR_CR2_WUPP5<<6) | PWR_CSR2_EWUP5)
|
||||
#define PWR_WAKEUP_PIN6_LOW (uint32_t)((PWR_CR2_WUPP6<<6) | PWR_CSR2_EWUP6)
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup PWREx_Regulator_state_in_UnderDrive_mode PWREx Regulator state in UnderDrive mode
|
||||
* @{
|
||||
*/
|
||||
#define PWR_MAINREGULATOR_UNDERDRIVE_ON PWR_CR1_MRUDS
|
||||
#define PWR_LOWPOWERREGULATOR_UNDERDRIVE_ON ((uint32_t)(PWR_CR1_LPDS | PWR_CR1_LPUDS))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup PWREx_Over_Under_Drive_Flag PWREx Over Under Drive Flag
|
||||
* @{
|
||||
*/
|
||||
#define PWR_FLAG_ODRDY PWR_CSR1_ODRDY
|
||||
#define PWR_FLAG_ODSWRDY PWR_CSR1_ODSWRDY
|
||||
#define PWR_FLAG_UDRDY PWR_CSR1_UDRDY
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup PWREx_Wakeup_Pins_Flag PWREx Wake Up Pin Flags
|
||||
* @{
|
||||
*/
|
||||
#define PWR_WAKEUP_PIN_FLAG1 PWR_CSR2_WUPF1
|
||||
#define PWR_WAKEUP_PIN_FLAG2 PWR_CSR2_WUPF2
|
||||
#define PWR_WAKEUP_PIN_FLAG3 PWR_CSR2_WUPF3
|
||||
#define PWR_WAKEUP_PIN_FLAG4 PWR_CSR2_WUPF4
|
||||
#define PWR_WAKEUP_PIN_FLAG5 PWR_CSR2_WUPF5
|
||||
#define PWR_WAKEUP_PIN_FLAG6 PWR_CSR2_WUPF6
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/** @defgroup PWREx_Exported_Macro PWREx Exported Macro
|
||||
* @{
|
||||
*/
|
||||
/** @brief Macros to enable or disable the Over drive mode.
|
||||
*/
|
||||
#define __HAL_PWR_OVERDRIVE_ENABLE() (PWR->CR1 |= (uint32_t)PWR_CR1_ODEN)
|
||||
#define __HAL_PWR_OVERDRIVE_DISABLE() (PWR->CR1 &= (uint32_t)(~PWR_CR1_ODEN))
|
||||
|
||||
/** @brief Macros to enable or disable the Over drive switching.
|
||||
*/
|
||||
#define __HAL_PWR_OVERDRIVESWITCHING_ENABLE() (PWR->CR1 |= (uint32_t)PWR_CR1_ODSWEN)
|
||||
#define __HAL_PWR_OVERDRIVESWITCHING_DISABLE() (PWR->CR1 &= (uint32_t)(~PWR_CR1_ODSWEN))
|
||||
|
||||
/** @brief Macros to enable or disable the Under drive mode.
|
||||
* @note This mode is enabled only with STOP low power mode.
|
||||
* In this mode, the 1.2V domain is preserved in reduced leakage mode. This
|
||||
* mode is only available when the main regulator or the low power regulator
|
||||
* is in low voltage mode.
|
||||
* @note If the Under-drive mode was enabled, it is automatically disabled after
|
||||
* exiting Stop mode.
|
||||
* When the voltage regulator operates in Under-drive mode, an additional
|
||||
* startup delay is induced when waking up from Stop mode.
|
||||
*/
|
||||
#define __HAL_PWR_UNDERDRIVE_ENABLE() (PWR->CR1 |= (uint32_t)PWR_CR1_UDEN)
|
||||
#define __HAL_PWR_UNDERDRIVE_DISABLE() (PWR->CR1 &= (uint32_t)(~PWR_CR1_UDEN))
|
||||
|
||||
/** @brief Check PWR flag is set or not.
|
||||
* @param __FLAG__ specifies the flag to check.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg PWR_FLAG_ODRDY: This flag indicates that the Over-drive mode
|
||||
* is ready
|
||||
* @arg PWR_FLAG_ODSWRDY: This flag indicates that the Over-drive mode
|
||||
* switching is ready
|
||||
* @arg PWR_FLAG_UDRDY: This flag indicates that the Under-drive mode
|
||||
* is enabled in Stop mode
|
||||
* @retval The new state of __FLAG__ (TRUE or FALSE).
|
||||
*/
|
||||
#define __HAL_PWR_GET_ODRUDR_FLAG(__FLAG__) ((PWR->CSR1 & (__FLAG__)) == (__FLAG__))
|
||||
|
||||
/** @brief Clear the Under-Drive Ready flag.
|
||||
*/
|
||||
#define __HAL_PWR_CLEAR_ODRUDR_FLAG() (PWR->CSR1 |= (PWR_FLAG_UDRDY | PWR_CSR1_EIWUP))
|
||||
|
||||
/** @brief Check Wake Up flag is set or not.
|
||||
* @param __WUFLAG__ specifies the Wake Up flag to check.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg PWR_WAKEUP_PIN_FLAG1: Wakeup Pin Flag for PA0
|
||||
* @arg PWR_WAKEUP_PIN_FLAG2: Wakeup Pin Flag for PA2
|
||||
* @arg PWR_WAKEUP_PIN_FLAG3: Wakeup Pin Flag for PC1
|
||||
* @arg PWR_WAKEUP_PIN_FLAG4: Wakeup Pin Flag for PC13
|
||||
* @arg PWR_WAKEUP_PIN_FLAG5: Wakeup Pin Flag for PI8
|
||||
* @arg PWR_WAKEUP_PIN_FLAG6: Wakeup Pin Flag for PI11
|
||||
*/
|
||||
#define __HAL_PWR_GET_WAKEUP_FLAG(__WUFLAG__) (PWR->CSR2 & (__WUFLAG__))
|
||||
|
||||
/** @brief Clear the WakeUp pins flags.
|
||||
* @param __WUFLAG__ specifies the Wake Up pin flag to clear.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg PWR_WAKEUP_PIN_FLAG1: Wakeup Pin Flag for PA0
|
||||
* @arg PWR_WAKEUP_PIN_FLAG2: Wakeup Pin Flag for PA2
|
||||
* @arg PWR_WAKEUP_PIN_FLAG3: Wakeup Pin Flag for PC1
|
||||
* @arg PWR_WAKEUP_PIN_FLAG4: Wakeup Pin Flag for PC13
|
||||
* @arg PWR_WAKEUP_PIN_FLAG5: Wakeup Pin Flag for PI8
|
||||
* @arg PWR_WAKEUP_PIN_FLAG6: Wakeup Pin Flag for PI11
|
||||
*/
|
||||
#define __HAL_PWR_CLEAR_WAKEUP_FLAG(__WUFLAG__) (PWR->CR2 |= (__WUFLAG__))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup PWREx_Exported_Functions PWREx Exported Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup PWREx_Exported_Functions_Group1
|
||||
* @{
|
||||
*/
|
||||
uint32_t HAL_PWREx_GetVoltageRange(void);
|
||||
HAL_StatusTypeDef HAL_PWREx_ControlVoltageScaling(uint32_t VoltageScaling);
|
||||
|
||||
void HAL_PWREx_EnableFlashPowerDown(void);
|
||||
void HAL_PWREx_DisableFlashPowerDown(void);
|
||||
HAL_StatusTypeDef HAL_PWREx_EnableBkUpReg(void);
|
||||
HAL_StatusTypeDef HAL_PWREx_DisableBkUpReg(void);
|
||||
|
||||
void HAL_PWREx_EnableMainRegulatorLowVoltage(void);
|
||||
void HAL_PWREx_DisableMainRegulatorLowVoltage(void);
|
||||
void HAL_PWREx_EnableLowRegulatorLowVoltage(void);
|
||||
void HAL_PWREx_DisableLowRegulatorLowVoltage(void);
|
||||
|
||||
HAL_StatusTypeDef HAL_PWREx_EnableOverDrive(void);
|
||||
HAL_StatusTypeDef HAL_PWREx_DisableOverDrive(void);
|
||||
HAL_StatusTypeDef HAL_PWREx_EnterUnderDriveSTOPMode(uint32_t Regulator, uint8_t STOPEntry);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup PWREx_Private_Macros PWREx Private Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup PWREx_IS_PWR_Definitions PWREx Private macros to check input parameters
|
||||
* @{
|
||||
*/
|
||||
#define IS_PWR_REGULATOR_UNDERDRIVE(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_UNDERDRIVE_ON) || \
|
||||
((REGULATOR) == PWR_LOWPOWERREGULATOR_UNDERDRIVE_ON))
|
||||
#define IS_PWR_WAKEUP_PIN(__PIN__) (((__PIN__) == PWR_WAKEUP_PIN1) || \
|
||||
((__PIN__) == PWR_WAKEUP_PIN2) || \
|
||||
((__PIN__) == PWR_WAKEUP_PIN3) || \
|
||||
((__PIN__) == PWR_WAKEUP_PIN4) || \
|
||||
((__PIN__) == PWR_WAKEUP_PIN5) || \
|
||||
((__PIN__) == PWR_WAKEUP_PIN6) || \
|
||||
((__PIN__) == PWR_WAKEUP_PIN1_HIGH) || \
|
||||
((__PIN__) == PWR_WAKEUP_PIN2_HIGH) || \
|
||||
((__PIN__) == PWR_WAKEUP_PIN3_HIGH) || \
|
||||
((__PIN__) == PWR_WAKEUP_PIN4_HIGH) || \
|
||||
((__PIN__) == PWR_WAKEUP_PIN5_HIGH) || \
|
||||
((__PIN__) == PWR_WAKEUP_PIN6_HIGH) || \
|
||||
((__PIN__) == PWR_WAKEUP_PIN1_LOW) || \
|
||||
((__PIN__) == PWR_WAKEUP_PIN2_LOW) || \
|
||||
((__PIN__) == PWR_WAKEUP_PIN3_LOW) || \
|
||||
((__PIN__) == PWR_WAKEUP_PIN4_LOW) || \
|
||||
((__PIN__) == PWR_WAKEUP_PIN5_LOW) || \
|
||||
((__PIN__) == PWR_WAKEUP_PIN6_LOW))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
|
||||
#endif /* __STM32F7xx_HAL_PWR_EX_H */
|
||||
|
||||
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
@@ -0,0 +1,358 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f7xx_hal_tim_ex.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of TIM HAL Extended module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef STM32F7xx_HAL_TIM_EX_H
|
||||
#define STM32F7xx_HAL_TIM_EX_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f7xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F7xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup TIMEx
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/** @defgroup TIMEx_Exported_Types TIM Extended Exported Types
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief TIM Hall sensor Configuration Structure definition
|
||||
*/
|
||||
|
||||
typedef struct
|
||||
{
|
||||
uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal.
|
||||
This parameter can be a value of @ref TIM_Input_Capture_Polarity */
|
||||
|
||||
uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler.
|
||||
This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
|
||||
|
||||
uint32_t IC1Filter; /*!< Specifies the input capture filter.
|
||||
This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
|
||||
|
||||
uint32_t Commutation_Delay; /*!< Specifies the pulse value to be loaded into the Capture Compare Register.
|
||||
This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
|
||||
} TIM_HallSensor_InitTypeDef;
|
||||
#if defined(TIM_BREAK_INPUT_SUPPORT)
|
||||
|
||||
/**
|
||||
* @brief TIM Break/Break2 input configuration
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t Source; /*!< Specifies the source of the timer break input.
|
||||
This parameter can be a value of @ref TIMEx_Break_Input_Source */
|
||||
uint32_t Enable; /*!< Specifies whether or not the break input source is enabled.
|
||||
This parameter can be a value of @ref TIMEx_Break_Input_Source_Enable */
|
||||
uint32_t Polarity; /*!< Specifies the break input source polarity.
|
||||
This parameter can be a value of @ref TIMEx_Break_Input_Source_Polarity
|
||||
Not relevant when analog watchdog output of the DFSDM1 used as break input source */
|
||||
} TIMEx_BreakInputConfigTypeDef;
|
||||
|
||||
#endif /* TIM_BREAK_INPUT_SUPPORT */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* End of exported types -----------------------------------------------------*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup TIMEx_Exported_Constants TIM Extended Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup TIMEx_Remap TIM Extended Remapping
|
||||
* @{
|
||||
*/
|
||||
#define TIM_TIM2_TIM8_TRGO (0x00000000U)
|
||||
#define TIM_TIM2_ETH_PTP (0x00000400U)
|
||||
#define TIM_TIM2_USBFS_SOF (0x00000800U)
|
||||
#define TIM_TIM2_USBHS_SOF (0x00000C00U)
|
||||
#define TIM_TIM5_GPIO (0x00000000U)
|
||||
#define TIM_TIM5_LSI (0x00000040U)
|
||||
#define TIM_TIM5_LSE (0x00000080U)
|
||||
#define TIM_TIM5_RTC (0x000000C0U)
|
||||
#define TIM_TIM11_GPIO (0x00000000U)
|
||||
#define TIM_TIM11_SPDIFRX (0x00000001U)
|
||||
#define TIM_TIM11_HSE (0x00000002U)
|
||||
#define TIM_TIM11_MCO1 (0x00000003U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#if defined(TIM_BREAK_INPUT_SUPPORT)
|
||||
|
||||
/** @defgroup TIMEx_Break_Input TIM Extended Break input
|
||||
* @{
|
||||
*/
|
||||
#define TIM_BREAKINPUT_BRK 0x00000001U /*!< Timer break input */
|
||||
#define TIM_BREAKINPUT_BRK2 0x00000002U /*!< Timer break2 input */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup TIMEx_Break_Input_Source TIM Extended Break input source
|
||||
* @{
|
||||
*/
|
||||
#define TIM_BREAKINPUTSOURCE_BKIN (0x00000001U) /* !< An external source (GPIO) is connected to the BKIN pin */
|
||||
#define TIM_BREAKINPUTSOURCE_DFSDM1 (0x00000008U) /* !< The analog watchdog output of the DFSDM1 peripheral is connected to the break input */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup TIMEx_Break_Input_Source_Enable TIM Extended Break input source enabling
|
||||
* @{
|
||||
*/
|
||||
#define TIM_BREAKINPUTSOURCE_DISABLE 0x00000000U /*!< Break input source is disabled */
|
||||
#define TIM_BREAKINPUTSOURCE_ENABLE 0x00000001U /*!< Break input source is enabled */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup TIMEx_Break_Input_Source_Polarity TIM Extended Break input polarity
|
||||
* @{
|
||||
*/
|
||||
#define TIM_BREAKINPUTSOURCE_POLARITY_LOW 0x00000001U /*!< Break input source is active low */
|
||||
#define TIM_BREAKINPUTSOURCE_POLARITY_HIGH 0x00000000U /*!< Break input source is active_high */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#endif /* TIM_BREAK_INPUT_SUPPORT */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* End of exported constants -------------------------------------------------*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/** @defgroup TIMEx_Exported_Macros TIM Extended Exported Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* End of exported macro -----------------------------------------------------*/
|
||||
|
||||
/* Private macro -------------------------------------------------------------*/
|
||||
/** @defgroup TIMEx_Private_Macros TIM Extended Private Macros
|
||||
* @{
|
||||
*/
|
||||
#define IS_TIM_REMAP(__TIM_REMAP__) (((__TIM_REMAP__) == TIM_TIM2_TIM8_TRGO)||\
|
||||
((__TIM_REMAP__) == TIM_TIM2_ETH_PTP) ||\
|
||||
((__TIM_REMAP__) == TIM_TIM2_USBFS_SOF)||\
|
||||
((__TIM_REMAP__) == TIM_TIM2_USBHS_SOF)||\
|
||||
((__TIM_REMAP__) == TIM_TIM5_GPIO) ||\
|
||||
((__TIM_REMAP__) == TIM_TIM5_LSI) ||\
|
||||
((__TIM_REMAP__) == TIM_TIM5_LSE) ||\
|
||||
((__TIM_REMAP__) == TIM_TIM5_RTC) ||\
|
||||
((__TIM_REMAP__) == TIM_TIM11_GPIO) ||\
|
||||
((__TIM_REMAP__) == TIM_TIM11_SPDIFRX) ||\
|
||||
((__TIM_REMAP__) == TIM_TIM11_HSE) ||\
|
||||
((__TIM_REMAP__) == TIM_TIM11_MCO1))
|
||||
#if defined(TIM_BREAK_INPUT_SUPPORT)
|
||||
|
||||
#define IS_TIM_BREAKINPUT(__BREAKINPUT__) (((__BREAKINPUT__) == TIM_BREAKINPUT_BRK) || \
|
||||
((__BREAKINPUT__) == TIM_BREAKINPUT_BRK2))
|
||||
|
||||
#define IS_TIM_BREAKINPUTSOURCE(__SOURCE__) (((__SOURCE__) == TIM_BREAKINPUTSOURCE_BKIN) || \
|
||||
((__SOURCE__) == TIM_BREAKINPUTSOURCE_DFSDM))
|
||||
|
||||
#define IS_TIM_BREAKINPUTSOURCE_STATE(__STATE__) (((__STATE__) == TIM_BREAKINPUTSOURCE_DISABLE) || \
|
||||
((__STATE__) == TIM_BREAKINPUTSOURCE_ENABLE))
|
||||
|
||||
#define IS_TIM_BREAKINPUTSOURCE_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_BREAKINPUTSOURCE_POLARITY_LOW) || \
|
||||
((__POLARITY__) == TIM_BREAKINPUTSOURCE_POLARITY_HIGH))
|
||||
#endif /* TIM_BREAK_INPUT_SUPPORT */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* End of private macro ------------------------------------------------------*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup TIMEx_Exported_Functions TIM Extended Exported Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup TIMEx_Exported_Functions_Group1 Extended Timer Hall Sensor functions
|
||||
* @brief Timer Hall Sensor functions
|
||||
* @{
|
||||
*/
|
||||
/* Timer Hall Sensor functions **********************************************/
|
||||
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef *htim, TIM_HallSensor_InitTypeDef *sConfig);
|
||||
HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef *htim);
|
||||
|
||||
void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef *htim);
|
||||
void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef *htim);
|
||||
|
||||
/* Blocking mode: Polling */
|
||||
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef *htim);
|
||||
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef *htim);
|
||||
/* Non-Blocking mode: Interrupt */
|
||||
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef *htim);
|
||||
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef *htim);
|
||||
/* Non-Blocking mode: DMA */
|
||||
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length);
|
||||
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef *htim);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup TIMEx_Exported_Functions_Group2 Extended Timer Complementary Output Compare functions
|
||||
* @brief Timer Complementary Output Compare functions
|
||||
* @{
|
||||
*/
|
||||
/* Timer Complementary Output Compare functions *****************************/
|
||||
/* Blocking mode: Polling */
|
||||
HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
|
||||
HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
|
||||
|
||||
/* Non-Blocking mode: Interrupt */
|
||||
HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
|
||||
HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
|
||||
|
||||
/* Non-Blocking mode: DMA */
|
||||
HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
|
||||
HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup TIMEx_Exported_Functions_Group3 Extended Timer Complementary PWM functions
|
||||
* @brief Timer Complementary PWM functions
|
||||
* @{
|
||||
*/
|
||||
/* Timer Complementary PWM functions ****************************************/
|
||||
/* Blocking mode: Polling */
|
||||
HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
|
||||
HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
|
||||
|
||||
/* Non-Blocking mode: Interrupt */
|
||||
HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
|
||||
HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
|
||||
/* Non-Blocking mode: DMA */
|
||||
HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
|
||||
HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup TIMEx_Exported_Functions_Group4 Extended Timer Complementary One Pulse functions
|
||||
* @brief Timer Complementary One Pulse functions
|
||||
* @{
|
||||
*/
|
||||
/* Timer Complementary One Pulse functions **********************************/
|
||||
/* Blocking mode: Polling */
|
||||
HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
|
||||
HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
|
||||
|
||||
/* Non-Blocking mode: Interrupt */
|
||||
HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
|
||||
HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup TIMEx_Exported_Functions_Group5 Extended Peripheral Control functions
|
||||
* @brief Peripheral Control functions
|
||||
* @{
|
||||
*/
|
||||
/* Extended Control functions ************************************************/
|
||||
HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent(TIM_HandleTypeDef *htim, uint32_t InputTrigger,
|
||||
uint32_t CommutationSource);
|
||||
HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_IT(TIM_HandleTypeDef *htim, uint32_t InputTrigger,
|
||||
uint32_t CommutationSource);
|
||||
HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_DMA(TIM_HandleTypeDef *htim, uint32_t InputTrigger,
|
||||
uint32_t CommutationSource);
|
||||
HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim,
|
||||
TIM_MasterConfigTypeDef *sMasterConfig);
|
||||
HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim,
|
||||
TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig);
|
||||
#if defined(TIM_BREAK_INPUT_SUPPORT)
|
||||
HAL_StatusTypeDef HAL_TIMEx_ConfigBreakInput(TIM_HandleTypeDef *htim, uint32_t BreakInput,
|
||||
TIMEx_BreakInputConfigTypeDef *sBreakInputConfig);
|
||||
#endif /* TIM_BREAK_INPUT_SUPPORT */
|
||||
HAL_StatusTypeDef HAL_TIMEx_GroupChannel5(TIM_HandleTypeDef *htim, uint32_t Channels);
|
||||
HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup TIMEx_Exported_Functions_Group6 Extended Callbacks functions
|
||||
* @brief Extended Callbacks functions
|
||||
* @{
|
||||
*/
|
||||
/* Extended Callback **********************************************************/
|
||||
void HAL_TIMEx_CommutCallback(TIM_HandleTypeDef *htim);
|
||||
void HAL_TIMEx_CommutHalfCpltCallback(TIM_HandleTypeDef *htim);
|
||||
void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef *htim);
|
||||
void HAL_TIMEx_Break2Callback(TIM_HandleTypeDef *htim);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup TIMEx_Exported_Functions_Group7 Extended Peripheral State functions
|
||||
* @brief Extended Peripheral State functions
|
||||
* @{
|
||||
*/
|
||||
/* Extended Peripheral State functions ***************************************/
|
||||
HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef *htim);
|
||||
HAL_TIM_ChannelStateTypeDef HAL_TIMEx_GetChannelNState(TIM_HandleTypeDef *htim, uint32_t ChannelN);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* End of exported functions -------------------------------------------------*/
|
||||
|
||||
/* Private functions----------------------------------------------------------*/
|
||||
/** @addtogroup TIMEx_Private_Functions TIM Extended Private Functions
|
||||
* @{
|
||||
*/
|
||||
void TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma);
|
||||
void TIMEx_DMACommutationHalfCplt(DMA_HandleTypeDef *hdma);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* End of private functions --------------------------------------------------*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
|
||||
#endif /* STM32F7xx_HAL_TIM_EX_H */
|
||||
File diff suppressed because it is too large
Load Diff
@@ -0,0 +1,428 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f7xx_hal_uart_ex.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of UART HAL Extended module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef STM32F7xx_HAL_UART_EX_H
|
||||
#define STM32F7xx_HAL_UART_EX_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f7xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F7xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup UARTEx
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/** @defgroup UARTEx_Exported_Types UARTEx Exported Types
|
||||
* @{
|
||||
*/
|
||||
|
||||
#if defined(USART_CR1_UESM)
|
||||
/**
|
||||
* @brief UART wake up from stop mode parameters
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t WakeUpEvent; /*!< Specifies which event will activate the Wakeup from Stop mode flag (WUF).
|
||||
This parameter can be a value of @ref UART_WakeUp_from_Stop_Selection.
|
||||
If set to UART_WAKEUP_ON_ADDRESS, the two other fields below must
|
||||
be filled up. */
|
||||
|
||||
uint16_t AddressLength; /*!< Specifies whether the address is 4 or 7-bit long.
|
||||
This parameter can be a value of @ref UARTEx_WakeUp_Address_Length. */
|
||||
|
||||
uint8_t Address; /*!< UART/USART node address (7-bit long max). */
|
||||
} UART_WakeUpTypeDef;
|
||||
|
||||
#endif /* USART_CR1_UESM */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup UARTEx_Exported_Constants UARTEx Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup UARTEx_Word_Length UARTEx Word Length
|
||||
* @{
|
||||
*/
|
||||
#define UART_WORDLENGTH_7B USART_CR1_M1 /*!< 7-bit long UART frame */
|
||||
#define UART_WORDLENGTH_8B 0x00000000U /*!< 8-bit long UART frame */
|
||||
#define UART_WORDLENGTH_9B USART_CR1_M0 /*!< 9-bit long UART frame */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup UARTEx_WakeUp_Address_Length UARTEx WakeUp Address Length
|
||||
* @{
|
||||
*/
|
||||
#define UART_ADDRESS_DETECT_4B 0x00000000U /*!< 4-bit long wake-up address */
|
||||
#define UART_ADDRESS_DETECT_7B USART_CR2_ADDM7 /*!< 7-bit long wake-up address */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macros -----------------------------------------------------------*/
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup UARTEx_Exported_Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup UARTEx_Exported_Functions_Group1
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Initialization and de-initialization functions ****************************/
|
||||
HAL_StatusTypeDef HAL_RS485Ex_Init(UART_HandleTypeDef *huart, uint32_t Polarity, uint32_t AssertionTime,
|
||||
uint32_t DeassertionTime);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup UARTEx_Exported_Functions_Group2
|
||||
* @{
|
||||
*/
|
||||
|
||||
#if defined(USART_CR1_UESM)
|
||||
void HAL_UARTEx_WakeupCallback(UART_HandleTypeDef *huart);
|
||||
|
||||
#endif /* USART_CR1_UESM */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup UARTEx_Exported_Functions_Group3
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Peripheral Control functions **********************************************/
|
||||
#if defined(USART_CR1_UESM)
|
||||
HAL_StatusTypeDef HAL_UARTEx_StopModeWakeUpSourceConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection);
|
||||
HAL_StatusTypeDef HAL_UARTEx_EnableStopMode(UART_HandleTypeDef *huart);
|
||||
HAL_StatusTypeDef HAL_UARTEx_DisableStopMode(UART_HandleTypeDef *huart);
|
||||
|
||||
#endif/* USART_CR1_UESM */
|
||||
#if defined(USART_CR3_UCESM)
|
||||
HAL_StatusTypeDef HAL_UARTEx_EnableClockStopMode(UART_HandleTypeDef *huart);
|
||||
HAL_StatusTypeDef HAL_UARTEx_DisableClockStopMode(UART_HandleTypeDef *huart);
|
||||
|
||||
#endif /* USART_CR3_UCESM */
|
||||
HAL_StatusTypeDef HAL_MultiProcessorEx_AddressLength_Set(UART_HandleTypeDef *huart, uint32_t AddressLength);
|
||||
|
||||
|
||||
HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint16_t *RxLen,
|
||||
uint32_t Timeout);
|
||||
HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
|
||||
HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
|
||||
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup UARTEx_Private_Macros UARTEx Private Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @brief Report the UART clock source.
|
||||
* @param __HANDLE__ specifies the UART Handle.
|
||||
* @param __CLOCKSOURCE__ output variable.
|
||||
* @retval UART clocking source, written in __CLOCKSOURCE__.
|
||||
*/
|
||||
#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
|
||||
do { \
|
||||
if((__HANDLE__)->Instance == USART1) \
|
||||
{ \
|
||||
switch(__HAL_RCC_GET_USART1_SOURCE()) \
|
||||
{ \
|
||||
case RCC_USART1CLKSOURCE_PCLK2: \
|
||||
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK2; \
|
||||
break; \
|
||||
case RCC_USART1CLKSOURCE_HSI: \
|
||||
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
|
||||
break; \
|
||||
case RCC_USART1CLKSOURCE_SYSCLK: \
|
||||
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
|
||||
break; \
|
||||
case RCC_USART1CLKSOURCE_LSE: \
|
||||
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
|
||||
break; \
|
||||
default: \
|
||||
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
|
||||
break; \
|
||||
} \
|
||||
} \
|
||||
else if((__HANDLE__)->Instance == USART2) \
|
||||
{ \
|
||||
switch(__HAL_RCC_GET_USART2_SOURCE()) \
|
||||
{ \
|
||||
case RCC_USART2CLKSOURCE_PCLK1: \
|
||||
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
|
||||
break; \
|
||||
case RCC_USART2CLKSOURCE_HSI: \
|
||||
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
|
||||
break; \
|
||||
case RCC_USART2CLKSOURCE_SYSCLK: \
|
||||
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
|
||||
break; \
|
||||
case RCC_USART2CLKSOURCE_LSE: \
|
||||
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
|
||||
break; \
|
||||
default: \
|
||||
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
|
||||
break; \
|
||||
} \
|
||||
} \
|
||||
else if((__HANDLE__)->Instance == USART3) \
|
||||
{ \
|
||||
switch(__HAL_RCC_GET_USART3_SOURCE()) \
|
||||
{ \
|
||||
case RCC_USART3CLKSOURCE_PCLK1: \
|
||||
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
|
||||
break; \
|
||||
case RCC_USART3CLKSOURCE_HSI: \
|
||||
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
|
||||
break; \
|
||||
case RCC_USART3CLKSOURCE_SYSCLK: \
|
||||
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
|
||||
break; \
|
||||
case RCC_USART3CLKSOURCE_LSE: \
|
||||
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
|
||||
break; \
|
||||
default: \
|
||||
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
|
||||
break; \
|
||||
} \
|
||||
} \
|
||||
else if((__HANDLE__)->Instance == UART4) \
|
||||
{ \
|
||||
switch(__HAL_RCC_GET_UART4_SOURCE()) \
|
||||
{ \
|
||||
case RCC_UART4CLKSOURCE_PCLK1: \
|
||||
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
|
||||
break; \
|
||||
case RCC_UART4CLKSOURCE_HSI: \
|
||||
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
|
||||
break; \
|
||||
case RCC_UART4CLKSOURCE_SYSCLK: \
|
||||
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
|
||||
break; \
|
||||
case RCC_UART4CLKSOURCE_LSE: \
|
||||
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
|
||||
break; \
|
||||
default: \
|
||||
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
|
||||
break; \
|
||||
} \
|
||||
} \
|
||||
else if ((__HANDLE__)->Instance == UART5) \
|
||||
{ \
|
||||
switch(__HAL_RCC_GET_UART5_SOURCE()) \
|
||||
{ \
|
||||
case RCC_UART5CLKSOURCE_PCLK1: \
|
||||
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
|
||||
break; \
|
||||
case RCC_UART5CLKSOURCE_HSI: \
|
||||
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
|
||||
break; \
|
||||
case RCC_UART5CLKSOURCE_SYSCLK: \
|
||||
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
|
||||
break; \
|
||||
case RCC_UART5CLKSOURCE_LSE: \
|
||||
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
|
||||
break; \
|
||||
default: \
|
||||
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
|
||||
break; \
|
||||
} \
|
||||
} \
|
||||
else if((__HANDLE__)->Instance == USART6) \
|
||||
{ \
|
||||
switch(__HAL_RCC_GET_USART6_SOURCE()) \
|
||||
{ \
|
||||
case RCC_USART6CLKSOURCE_PCLK2: \
|
||||
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK2; \
|
||||
break; \
|
||||
case RCC_USART6CLKSOURCE_HSI: \
|
||||
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
|
||||
break; \
|
||||
case RCC_USART6CLKSOURCE_SYSCLK: \
|
||||
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
|
||||
break; \
|
||||
case RCC_USART6CLKSOURCE_LSE: \
|
||||
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
|
||||
break; \
|
||||
default: \
|
||||
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
|
||||
break; \
|
||||
} \
|
||||
} \
|
||||
else if ((__HANDLE__)->Instance == UART7) \
|
||||
{ \
|
||||
switch(__HAL_RCC_GET_UART7_SOURCE()) \
|
||||
{ \
|
||||
case RCC_UART7CLKSOURCE_PCLK1: \
|
||||
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
|
||||
break; \
|
||||
case RCC_UART7CLKSOURCE_HSI: \
|
||||
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
|
||||
break; \
|
||||
case RCC_UART7CLKSOURCE_SYSCLK: \
|
||||
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
|
||||
break; \
|
||||
case RCC_UART7CLKSOURCE_LSE: \
|
||||
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
|
||||
break; \
|
||||
default: \
|
||||
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
|
||||
break; \
|
||||
} \
|
||||
} \
|
||||
else if ((__HANDLE__)->Instance == UART8) \
|
||||
{ \
|
||||
switch(__HAL_RCC_GET_UART8_SOURCE()) \
|
||||
{ \
|
||||
case RCC_UART8CLKSOURCE_PCLK1: \
|
||||
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
|
||||
break; \
|
||||
case RCC_UART8CLKSOURCE_HSI: \
|
||||
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
|
||||
break; \
|
||||
case RCC_UART8CLKSOURCE_SYSCLK: \
|
||||
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
|
||||
break; \
|
||||
case RCC_UART8CLKSOURCE_LSE: \
|
||||
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
|
||||
break; \
|
||||
default: \
|
||||
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
|
||||
break; \
|
||||
} \
|
||||
} \
|
||||
else \
|
||||
{ \
|
||||
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
|
||||
} \
|
||||
} while(0U)
|
||||
|
||||
/** @brief Report the UART mask to apply to retrieve the received data
|
||||
* according to the word length and to the parity bits activation.
|
||||
* @note If PCE = 1, the parity bit is not included in the data extracted
|
||||
* by the reception API().
|
||||
* This masking operation is not carried out in the case of
|
||||
* DMA transfers.
|
||||
* @param __HANDLE__ specifies the UART Handle.
|
||||
* @retval None, the mask to apply to UART RDR register is stored in (__HANDLE__)->Mask field.
|
||||
*/
|
||||
#define UART_MASK_COMPUTATION(__HANDLE__) \
|
||||
do { \
|
||||
if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_9B) \
|
||||
{ \
|
||||
if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \
|
||||
{ \
|
||||
(__HANDLE__)->Mask = 0x01FFU ; \
|
||||
} \
|
||||
else \
|
||||
{ \
|
||||
(__HANDLE__)->Mask = 0x00FFU ; \
|
||||
} \
|
||||
} \
|
||||
else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_8B) \
|
||||
{ \
|
||||
if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \
|
||||
{ \
|
||||
(__HANDLE__)->Mask = 0x00FFU ; \
|
||||
} \
|
||||
else \
|
||||
{ \
|
||||
(__HANDLE__)->Mask = 0x007FU ; \
|
||||
} \
|
||||
} \
|
||||
else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_7B) \
|
||||
{ \
|
||||
if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \
|
||||
{ \
|
||||
(__HANDLE__)->Mask = 0x007FU ; \
|
||||
} \
|
||||
else \
|
||||
{ \
|
||||
(__HANDLE__)->Mask = 0x003FU ; \
|
||||
} \
|
||||
} \
|
||||
else \
|
||||
{ \
|
||||
(__HANDLE__)->Mask = 0x0000U; \
|
||||
} \
|
||||
} while(0U)
|
||||
|
||||
/**
|
||||
* @brief Ensure that UART frame length is valid.
|
||||
* @param __LENGTH__ UART frame length.
|
||||
* @retval SET (__LENGTH__ is valid) or RESET (__LENGTH__ is invalid)
|
||||
*/
|
||||
#define IS_UART_WORD_LENGTH(__LENGTH__) (((__LENGTH__) == UART_WORDLENGTH_7B) || \
|
||||
((__LENGTH__) == UART_WORDLENGTH_8B) || \
|
||||
((__LENGTH__) == UART_WORDLENGTH_9B))
|
||||
|
||||
/**
|
||||
* @brief Ensure that UART wake-up address length is valid.
|
||||
* @param __ADDRESS__ UART wake-up address length.
|
||||
* @retval SET (__ADDRESS__ is valid) or RESET (__ADDRESS__ is invalid)
|
||||
*/
|
||||
#define IS_UART_ADDRESSLENGTH_DETECT(__ADDRESS__) (((__ADDRESS__) == UART_ADDRESS_DETECT_4B) || \
|
||||
((__ADDRESS__) == UART_ADDRESS_DETECT_7B))
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* STM32F7xx_HAL_UART_EX_H */
|
||||
|
||||
Reference in New Issue
Block a user