Initial commit

306-controller_interface.X/mcc_generated_files/pin_manager.h

@@ -0,0 +1,149 @@
+/**
+  @Generated Pin Manager Header File
+
+  @Company:
+    Microchip Technology Inc.
+
+  @File Name:
+    pin_manager.h
+
+  @Summary:
+    This is the Pin Manager file generated using PIC10 / PIC12 / PIC16 / PIC18 MCUs
+
+  @Description
+    This header file provides APIs for driver for .
+    Generation Information :
+        Product Revision  :  PIC10 / PIC12 / PIC16 / PIC18 MCUs - 1.81.8
+        Device            :  PIC18F26K83
+        Driver Version    :  2.11
+    The generated drivers are tested against the following:
+        Compiler          :  XC8 2.36 and above
+        MPLAB 	          :  MPLAB X 6.00	
+*/
+
+/*
+    (c) 2018 Microchip Technology Inc. and its subsidiaries. 
+    
+    Subject to your compliance with these terms, you may use Microchip software and any 
+    derivatives exclusively with Microchip products. It is your responsibility to comply with third party 
+    license terms applicable to your use of third party software (including open source software) that 
+    may accompany Microchip software.
+    
+    THIS SOFTWARE IS SUPPLIED BY MICROCHIP "AS IS". NO WARRANTIES, WHETHER 
+    EXPRESS, IMPLIED OR STATUTORY, APPLY TO THIS SOFTWARE, INCLUDING ANY 
+    IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY, AND FITNESS 
+    FOR A PARTICULAR PURPOSE.
+    
+    IN NO EVENT WILL MICROCHIP BE LIABLE FOR ANY INDIRECT, SPECIAL, PUNITIVE, 
+    INCIDENTAL OR CONSEQUENTIAL LOSS, DAMAGE, COST OR EXPENSE OF ANY KIND 
+    WHATSOEVER RELATED TO THE SOFTWARE, HOWEVER CAUSED, EVEN IF MICROCHIP 
+    HAS BEEN ADVISED OF THE POSSIBILITY OR THE DAMAGES ARE FORESEEABLE. TO 
+    THE FULLEST EXTENT ALLOWED BY LAW, MICROCHIP'S TOTAL LIABILITY ON ALL 
+    CLAIMS IN ANY WAY RELATED TO THIS SOFTWARE WILL NOT EXCEED THE AMOUNT 
+    OF FEES, IF ANY, THAT YOU HAVE PAID DIRECTLY TO MICROCHIP FOR THIS 
+    SOFTWARE.
+*/
+
+#ifndef PIN_MANAGER_H
+#define PIN_MANAGER_H
+
+/**
+  Section: Included Files
+*/
+
+#include <xc.h>
+
+#define INPUT   1
+#define OUTPUT  0
+
+#define HIGH    1
+#define LOW     0
+
+#define ANALOG      1
+#define DIGITAL     0
+
+#define PULL_UP_ENABLED      1
+#define PULL_UP_DISABLED     0
+
+// get/set IO_RA7 aliases
+#define IO_RA7_TRIS                 TRISAbits.TRISA7
+#define IO_RA7_LAT                  LATAbits.LATA7
+#define IO_RA7_PORT                 PORTAbits.RA7
+#define IO_RA7_WPU                  WPUAbits.WPUA7
+#define IO_RA7_OD                   ODCONAbits.ODCA7
+#define IO_RA7_ANS                  ANSELAbits.ANSELA7
+#define IO_RA7_SetHigh()            do { LATAbits.LATA7 = 1; } while(0)
+#define IO_RA7_SetLow()             do { LATAbits.LATA7 = 0; } while(0)
+#define IO_RA7_Toggle()             do { LATAbits.LATA7 = ~LATAbits.LATA7; } while(0)
+#define IO_RA7_GetValue()           PORTAbits.RA7
+#define IO_RA7_SetDigitalInput()    do { TRISAbits.TRISA7 = 1; } while(0)
+#define IO_RA7_SetDigitalOutput()   do { TRISAbits.TRISA7 = 0; } while(0)
+#define IO_RA7_SetPullup()          do { WPUAbits.WPUA7 = 1; } while(0)
+#define IO_RA7_ResetPullup()        do { WPUAbits.WPUA7 = 0; } while(0)
+#define IO_RA7_SetPushPull()        do { ODCONAbits.ODCA7 = 0; } while(0)
+#define IO_RA7_SetOpenDrain()       do { ODCONAbits.ODCA7 = 1; } while(0)
+#define IO_RA7_SetAnalogMode()      do { ANSELAbits.ANSELA7 = 1; } while(0)
+#define IO_RA7_SetDigitalMode()     do { ANSELAbits.ANSELA7 = 0; } while(0)
+
+// get/set IO_RB0 aliases
+#define IO_RB0_TRIS                 TRISBbits.TRISB0
+#define IO_RB0_LAT                  LATBbits.LATB0
+#define IO_RB0_PORT                 PORTBbits.RB0
+#define IO_RB0_WPU                  WPUBbits.WPUB0
+#define IO_RB0_OD                   ODCONBbits.ODCB0
+#define IO_RB0_ANS                  ANSELBbits.ANSELB0
+#define IO_RB0_SetHigh()            do { LATBbits.LATB0 = 1; } while(0)
+#define IO_RB0_SetLow()             do { LATBbits.LATB0 = 0; } while(0)
+#define IO_RB0_Toggle()             do { LATBbits.LATB0 = ~LATBbits.LATB0; } while(0)
+#define IO_RB0_GetValue()           PORTBbits.RB0
+#define IO_RB0_SetDigitalInput()    do { TRISBbits.TRISB0 = 1; } while(0)
+#define IO_RB0_SetDigitalOutput()   do { TRISBbits.TRISB0 = 0; } while(0)
+#define IO_RB0_SetPullup()          do { WPUBbits.WPUB0 = 1; } while(0)
+#define IO_RB0_ResetPullup()        do { WPUBbits.WPUB0 = 0; } while(0)
+#define IO_RB0_SetPushPull()        do { ODCONBbits.ODCB0 = 0; } while(0)
+#define IO_RB0_SetOpenDrain()       do { ODCONBbits.ODCB0 = 1; } while(0)
+#define IO_RB0_SetAnalogMode()      do { ANSELBbits.ANSELB0 = 1; } while(0)
+#define IO_RB0_SetDigitalMode()     do { ANSELBbits.ANSELB0 = 0; } while(0)
+
+// get/set RB3 procedures
+#define RB3_SetHigh()            do { LATBbits.LATB3 = 1; } while(0)
+#define RB3_SetLow()             do { LATBbits.LATB3 = 0; } while(0)
+#define RB3_Toggle()             do { LATBbits.LATB3 = ~LATBbits.LATB3; } while(0)
+#define RB3_GetValue()              PORTBbits.RB3
+#define RB3_SetDigitalInput()    do { TRISBbits.TRISB3 = 1; } while(0)
+#define RB3_SetDigitalOutput()   do { TRISBbits.TRISB3 = 0; } while(0)
+#define RB3_SetPullup()             do { WPUBbits.WPUB3 = 1; } while(0)
+#define RB3_ResetPullup()           do { WPUBbits.WPUB3 = 0; } while(0)
+#define RB3_SetAnalogMode()         do { ANSELBbits.ANSELB3 = 1; } while(0)
+#define RB3_SetDigitalMode()        do { ANSELBbits.ANSELB3 = 0; } while(0)
+
+/**
+   @Param
+    none
+   @Returns
+    none
+   @Description
+    GPIO and peripheral I/O initialization
+   @Example
+    PIN_MANAGER_Initialize();
+ */
+void PIN_MANAGER_Initialize (void);
+
+/**
+ * @Param
+    none
+ * @Returns
+    none
+ * @Description
+    Interrupt on Change Handling routine
+ * @Example
+    PIN_MANAGER_IOC();
+ */
+void PIN_MANAGER_IOC(void);
+
+
+
+#endif // PIN_MANAGER_H
+/**
+ End of File
+*/