migration

mcc_generated_files/epwm1.c

@@ -0,0 +1,96 @@
+/**
+  EPWM1 Generated Driver File
+
+  @Company
+    Microchip Technology Inc.
+
+  @File Name
+    epwm1.c
+
+  @Summary
+    This is the generated driver implementation file for the EPWM1 driver using PIC10 / PIC12 / PIC16 / PIC18 MCUs
+
+  @Description
+    This source file provides implementations for driver APIs for EPWM1.
+    Generation Information :
+        Product Revision  :  PIC10 / PIC12 / PIC16 / PIC18 MCUs - 1.81.8
+        Device            :  PIC18F97J60
+        Driver Version    :  2.01
+    The generated drivers are tested against the following:
+        Compiler          :  XC8 2.36 and above
+         MPLAB 	          :  MPLAB X 6.00
+*/
+
+/*
+    (c) 2018 Microchip Technology Inc. and its subsidiaries. 
+    
+    Subject to your compliance with these terms, you may use Microchip software and any 
+    derivatives exclusively with Microchip products. It is your responsibility to comply with third party 
+    license terms applicable to your use of third party software (including open source software) that 
+    may accompany Microchip software.
+    
+    THIS SOFTWARE IS SUPPLIED BY MICROCHIP "AS IS". NO WARRANTIES, WHETHER 
+    EXPRESS, IMPLIED OR STATUTORY, APPLY TO THIS SOFTWARE, INCLUDING ANY 
+    IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY, AND FITNESS 
+    FOR A PARTICULAR PURPOSE.
+    
+    IN NO EVENT WILL MICROCHIP BE LIABLE FOR ANY INDIRECT, SPECIAL, PUNITIVE, 
+    INCIDENTAL OR CONSEQUENTIAL LOSS, DAMAGE, COST OR EXPENSE OF ANY KIND 
+    WHATSOEVER RELATED TO THE SOFTWARE, HOWEVER CAUSED, EVEN IF MICROCHIP 
+    HAS BEEN ADVISED OF THE POSSIBILITY OR THE DAMAGES ARE FORESEEABLE. TO 
+    THE FULLEST EXTENT ALLOWED BY LAW, MICROCHIP'S TOTAL LIABILITY ON ALL 
+    CLAIMS IN ANY WAY RELATED TO THIS SOFTWARE WILL NOT EXCEED THE AMOUNT 
+    OF FEES, IF ANY, THAT YOU HAVE PAID DIRECTLY TO MICROCHIP FOR THIS 
+    SOFTWARE.
+*/
+
+/**
+  Section: Included Files
+*/
+
+#include <xc.h>
+#include "epwm1.h"
+
+/**
+  Section: Macro Declarations
+*/
+
+#define PWM1_INITIALIZE_DUTY_VALUE    511
+
+/**
+  Section: EPWM Module APIs
+*/
+
+void EPWM1_Initialize(void)
+{
+    // Set the EPWM1 to the options selected in the User Interface
+	
+	// CCP1M P1A,P1C: active high; P1B,P1D: active high; DC1B 3; P1M single; 
+	CCP1CON = 0x3C;    
+	
+	// ECCPASE operating; PSSBD P1BP1D_0; PSSAC P1AP1C_0; ECCPAS disabled; 
+	ECCP1AS = 0x00;    
+	
+	// P1RSEN automatic_restart; P1DC0 0; 
+	ECCP1DEL = 0x80;    
+	
+	// CCPR1H 0; 
+	CCPR1H = 0x00;    
+	
+	// CCPR1L 127; 
+	CCPR1L = 0x7F;    
+
+}
+
+void EPWM1_LoadDutyValue(uint16_t dutyValue)
+{
+   // Writing to 8 MSBs of pwm duty cycle in CCPRL register
+    CCPR1L = ((dutyValue & 0x03FC)>>2);
+    
+   // Writing to 2 LSBs of pwm duty cycle in CCPCON register
+    CCP1CON = ((uint8_t)(CCP1CON & 0xCF) | ((dutyValue & 0x0003)<<4));
+}
+/**
+ End of File
+*/
+