Initial commit

solar_panel.X/mcc_generated_files/pin_manager.h

@@ -0,0 +1,128 @@
+/**
+  @Generated Pin Manager Header File
+
+  @Company:
+    Microchip Technology Inc.
+
+  @File Name:
+    pin_manager.h
+
+  @Summary:
+    This is the Pin Manager file generated using PIC10 / PIC12 / PIC16 / PIC18 MCUs
+
+  @Description:
+    This header file provides implementations for pin APIs for all pins selected in the GUI.
+    Generation Information :
+        Product Revision  :  PIC10 / PIC12 / PIC16 / PIC18 MCUs - 1.81.8
+        Device            :  PIC18F97J60
+        Version           :  2.0
+    The generated drivers are tested against the following:
+        Compiler          :  XC8 2.36 and above
+        MPLAB             :  MPLAB X 6.00
+
+    Copyright (c) 2013 - 2015 released Microchip Technology Inc.  All rights reserved.
+*/
+
+/*
+    (c) 2018 Microchip Technology Inc. and its subsidiaries. 
+    
+    Subject to your compliance with these terms, you may use Microchip software and any 
+    derivatives exclusively with Microchip products. It is your responsibility to comply with third party 
+    license terms applicable to your use of third party software (including open source software) that 
+    may accompany Microchip software.
+    
+    THIS SOFTWARE IS SUPPLIED BY MICROCHIP "AS IS". NO WARRANTIES, WHETHER 
+    EXPRESS, IMPLIED OR STATUTORY, APPLY TO THIS SOFTWARE, INCLUDING ANY 
+    IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY, AND FITNESS 
+    FOR A PARTICULAR PURPOSE.
+    
+    IN NO EVENT WILL MICROCHIP BE LIABLE FOR ANY INDIRECT, SPECIAL, PUNITIVE, 
+    INCIDENTAL OR CONSEQUENTIAL LOSS, DAMAGE, COST OR EXPENSE OF ANY KIND 
+    WHATSOEVER RELATED TO THE SOFTWARE, HOWEVER CAUSED, EVEN IF MICROCHIP 
+    HAS BEEN ADVISED OF THE POSSIBILITY OR THE DAMAGES ARE FORESEEABLE. TO 
+    THE FULLEST EXTENT ALLOWED BY LAW, MICROCHIP'S TOTAL LIABILITY ON ALL 
+    CLAIMS IN ANY WAY RELATED TO THIS SOFTWARE WILL NOT EXCEED THE AMOUNT 
+    OF FEES, IF ANY, THAT YOU HAVE PAID DIRECTLY TO MICROCHIP FOR THIS 
+    SOFTWARE.
+*/
+
+#ifndef PIN_MANAGER_H
+#define PIN_MANAGER_H
+
+/**
+  Section: Included Files
+*/
+
+#include <xc.h>
+
+#define INPUT   1
+#define OUTPUT  0
+
+#define HIGH    1
+#define LOW     0
+
+#define ANALOG      1
+#define DIGITAL     0
+
+#define PULL_UP_ENABLED      1
+#define PULL_UP_DISABLED     0
+
+// get/set voltage aliases
+#define voltage_TRIS                 TRISFbits.TRISF0
+#define voltage_LAT                  LATFbits.LATF0
+#define voltage_PORT                 PORTFbits.RF0
+#define voltage_ANS                  anselRF0bits.anselRF0
+#define voltage_SetHigh()            do { LATFbits.LATF0 = 1; } while(0)
+#define voltage_SetLow()             do { LATFbits.LATF0 = 0; } while(0)
+#define voltage_Toggle()             do { LATFbits.LATF0 = ~LATFbits.LATF0; } while(0)
+#define voltage_GetValue()           PORTFbits.RF0
+#define voltage_SetDigitalInput()    do { TRISFbits.TRISF0 = 1; } while(0)
+#define voltage_SetDigitalOutput()   do { TRISFbits.TRISF0 = 0; } while(0)
+#define voltage_SetAnalogMode()      do { anselRF0bits.anselRF0 = 1; } while(0)
+#define voltage_SetDigitalMode()     do { anselRF0bits.anselRF0 = 0; } while(0)
+
+// get/set current aliases
+#define current_TRIS                 TRISFbits.TRISF1
+#define current_LAT                  LATFbits.LATF1
+#define current_PORT                 PORTFbits.RF1
+#define current_ANS                  anselRF1bits.anselRF1
+#define current_SetHigh()            do { LATFbits.LATF1 = 1; } while(0)
+#define current_SetLow()             do { LATFbits.LATF1 = 0; } while(0)
+#define current_Toggle()             do { LATFbits.LATF1 = ~LATFbits.LATF1; } while(0)
+#define current_GetValue()           PORTFbits.RF1
+#define current_SetDigitalInput()    do { TRISFbits.TRISF1 = 1; } while(0)
+#define current_SetDigitalOutput()   do { TRISFbits.TRISF1 = 0; } while(0)
+#define current_SetAnalogMode()      do { anselRF1bits.anselRF1 = 1; } while(0)
+#define current_SetDigitalMode()     do { anselRF1bits.anselRF1 = 0; } while(0)
+
+
+/**
+   @Param
+    none
+   @Returns
+    none
+   @Description
+    GPIO and peripheral I/O initialization
+   @Example
+    PIN_MANAGER_Initialize();
+ */
+void PIN_MANAGER_Initialize (void);
+
+/**
+ * @Param
+    none
+ * @Returns
+    none
+ * @Description
+    Interrupt on Change Handling routine
+ * @Example
+    PIN_MANAGER_IOC();
+ */
+void PIN_MANAGER_IOC(void);
+
+
+
+#endif // PIN_MANAGER_H
+/**
+ End of File
+*/