2927 lines
110 KiB
C
2927 lines
110 KiB
C
/**
|
|
******************************************************************************
|
|
* @file stm32f7xx_hal_smartcard.c
|
|
* @author MCD Application Team
|
|
* @brief SMARTCARD HAL module driver.
|
|
* This file provides firmware functions to manage the following
|
|
* functionalities of the SMARTCARD peripheral:
|
|
* + Initialization and de-initialization functions
|
|
* + IO operation functions
|
|
* + Peripheral Control functions
|
|
* + Peripheral State and Error functions
|
|
*
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* Copyright (c) 2017 STMicroelectronics.
|
|
* All rights reserved.
|
|
*
|
|
* This software is licensed under terms that can be found in the LICENSE file
|
|
* in the root directory of this software component.
|
|
* If no LICENSE file comes with this software, it is provided AS-IS.
|
|
*
|
|
******************************************************************************
|
|
@verbatim
|
|
==============================================================================
|
|
##### How to use this driver #####
|
|
==============================================================================
|
|
[..]
|
|
The SMARTCARD HAL driver can be used as follows:
|
|
|
|
(#) Declare a SMARTCARD_HandleTypeDef handle structure (eg. SMARTCARD_HandleTypeDef hsmartcard).
|
|
(#) Associate a USART to the SMARTCARD handle hsmartcard.
|
|
(#) Initialize the SMARTCARD low level resources by implementing the HAL_SMARTCARD_MspInit() API:
|
|
(++) Enable the USARTx interface clock.
|
|
(++) USART pins configuration:
|
|
(+++) Enable the clock for the USART GPIOs.
|
|
(+++) Configure the USART pins (TX as alternate function pull-up, RX as alternate function Input).
|
|
(++) NVIC configuration if you need to use interrupt process (HAL_SMARTCARD_Transmit_IT()
|
|
and HAL_SMARTCARD_Receive_IT() APIs):
|
|
(+++) Configure the USARTx interrupt priority.
|
|
(+++) Enable the NVIC USART IRQ handle.
|
|
(++) DMA Configuration if you need to use DMA process (HAL_SMARTCARD_Transmit_DMA()
|
|
and HAL_SMARTCARD_Receive_DMA() APIs):
|
|
(+++) Declare a DMA handle structure for the Tx/Rx channel.
|
|
(+++) Enable the DMAx interface clock.
|
|
(+++) Configure the declared DMA handle structure with the required Tx/Rx parameters.
|
|
(+++) Configure the DMA Tx/Rx channel.
|
|
(+++) Associate the initialized DMA handle to the SMARTCARD DMA Tx/Rx handle.
|
|
(+++) Configure the priority and enable the NVIC for the transfer complete
|
|
interrupt on the DMA Tx/Rx channel.
|
|
|
|
(#) Program the Baud Rate, Parity, Mode(Receiver/Transmitter), clock enabling/disabling and accordingly,
|
|
the clock parameters (parity, phase, last bit), prescaler value, guard time and NACK on transmission
|
|
error enabling or disabling in the hsmartcard handle Init structure.
|
|
|
|
(#) If required, program SMARTCARD advanced features (TX/RX pins swap, TimeOut, auto-retry counter,...)
|
|
in the hsmartcard handle AdvancedInit structure.
|
|
|
|
(#) Initialize the SMARTCARD registers by calling the HAL_SMARTCARD_Init() API:
|
|
(++) This API configures also the low level Hardware GPIO, CLOCK, CORTEX...etc)
|
|
by calling the customized HAL_SMARTCARD_MspInit() API.
|
|
[..]
|
|
(@) The specific SMARTCARD interrupts (Transmission complete interrupt,
|
|
RXNE interrupt and Error Interrupts) will be managed using the macros
|
|
__HAL_SMARTCARD_ENABLE_IT() and __HAL_SMARTCARD_DISABLE_IT() inside the transmit and receive process.
|
|
|
|
[..]
|
|
[..] Three operation modes are available within this driver :
|
|
|
|
*** Polling mode IO operation ***
|
|
=================================
|
|
[..]
|
|
(+) Send an amount of data in blocking mode using HAL_SMARTCARD_Transmit()
|
|
(+) Receive an amount of data in blocking mode using HAL_SMARTCARD_Receive()
|
|
|
|
*** Interrupt mode IO operation ***
|
|
===================================
|
|
[..]
|
|
(+) Send an amount of data in non-blocking mode using HAL_SMARTCARD_Transmit_IT()
|
|
(+) At transmission end of transfer HAL_SMARTCARD_TxCpltCallback() is executed and user can
|
|
add his own code by customization of function pointer HAL_SMARTCARD_TxCpltCallback()
|
|
(+) Receive an amount of data in non-blocking mode using HAL_SMARTCARD_Receive_IT()
|
|
(+) At reception end of transfer HAL_SMARTCARD_RxCpltCallback() is executed and user can
|
|
add his own code by customization of function pointer HAL_SMARTCARD_RxCpltCallback()
|
|
(+) In case of transfer Error, HAL_SMARTCARD_ErrorCallback() function is executed and user can
|
|
add his own code by customization of function pointer HAL_SMARTCARD_ErrorCallback()
|
|
|
|
*** DMA mode IO operation ***
|
|
==============================
|
|
[..]
|
|
(+) Send an amount of data in non-blocking mode (DMA) using HAL_SMARTCARD_Transmit_DMA()
|
|
(+) At transmission end of transfer HAL_SMARTCARD_TxCpltCallback() is executed and user can
|
|
add his own code by customization of function pointer HAL_SMARTCARD_TxCpltCallback()
|
|
(+) Receive an amount of data in non-blocking mode (DMA) using HAL_SMARTCARD_Receive_DMA()
|
|
(+) At reception end of transfer HAL_SMARTCARD_RxCpltCallback() is executed and user can
|
|
add his own code by customization of function pointer HAL_SMARTCARD_RxCpltCallback()
|
|
(+) In case of transfer Error, HAL_SMARTCARD_ErrorCallback() function is executed and user can
|
|
add his own code by customization of function pointer HAL_SMARTCARD_ErrorCallback()
|
|
|
|
*** SMARTCARD HAL driver macros list ***
|
|
========================================
|
|
[..]
|
|
Below the list of most used macros in SMARTCARD HAL driver.
|
|
|
|
(+) __HAL_SMARTCARD_GET_FLAG : Check whether or not the specified SMARTCARD flag is set
|
|
(+) __HAL_SMARTCARD_CLEAR_FLAG : Clear the specified SMARTCARD pending flag
|
|
(+) __HAL_SMARTCARD_ENABLE_IT: Enable the specified SMARTCARD interrupt
|
|
(+) __HAL_SMARTCARD_DISABLE_IT: Disable the specified SMARTCARD interrupt
|
|
(+) __HAL_SMARTCARD_GET_IT_SOURCE: Check whether or not the specified SMARTCARD interrupt is enabled
|
|
|
|
[..]
|
|
(@) You can refer to the SMARTCARD HAL driver header file for more useful macros
|
|
|
|
##### Callback registration #####
|
|
==================================
|
|
|
|
[..]
|
|
The compilation define USE_HAL_SMARTCARD_REGISTER_CALLBACKS when set to 1
|
|
allows the user to configure dynamically the driver callbacks.
|
|
|
|
[..]
|
|
Use Function HAL_SMARTCARD_RegisterCallback() to register a user callback.
|
|
Function HAL_SMARTCARD_RegisterCallback() allows to register following callbacks:
|
|
(+) TxCpltCallback : Tx Complete Callback.
|
|
(+) RxCpltCallback : Rx Complete Callback.
|
|
(+) ErrorCallback : Error Callback.
|
|
(+) AbortCpltCallback : Abort Complete Callback.
|
|
(+) AbortTransmitCpltCallback : Abort Transmit Complete Callback.
|
|
(+) AbortReceiveCpltCallback : Abort Receive Complete Callback.
|
|
(+) MspInitCallback : SMARTCARD MspInit.
|
|
(+) MspDeInitCallback : SMARTCARD MspDeInit.
|
|
This function takes as parameters the HAL peripheral handle, the Callback ID
|
|
and a pointer to the user callback function.
|
|
|
|
[..]
|
|
Use function HAL_SMARTCARD_UnRegisterCallback() to reset a callback to the default
|
|
weak (surcharged) function.
|
|
HAL_SMARTCARD_UnRegisterCallback() takes as parameters the HAL peripheral handle,
|
|
and the Callback ID.
|
|
This function allows to reset following callbacks:
|
|
(+) TxCpltCallback : Tx Complete Callback.
|
|
(+) RxCpltCallback : Rx Complete Callback.
|
|
(+) ErrorCallback : Error Callback.
|
|
(+) AbortCpltCallback : Abort Complete Callback.
|
|
(+) AbortTransmitCpltCallback : Abort Transmit Complete Callback.
|
|
(+) AbortReceiveCpltCallback : Abort Receive Complete Callback.
|
|
(+) MspInitCallback : SMARTCARD MspInit.
|
|
(+) MspDeInitCallback : SMARTCARD MspDeInit.
|
|
|
|
[..]
|
|
By default, after the HAL_SMARTCARD_Init() and when the state is HAL_SMARTCARD_STATE_RESET
|
|
all callbacks are set to the corresponding weak (surcharged) functions:
|
|
examples HAL_SMARTCARD_TxCpltCallback(), HAL_SMARTCARD_RxCpltCallback().
|
|
Exception done for MspInit and MspDeInit functions that are respectively
|
|
reset to the legacy weak (surcharged) functions in the HAL_SMARTCARD_Init()
|
|
and HAL_SMARTCARD_DeInit() only when these callbacks are null (not registered beforehand).
|
|
If not, MspInit or MspDeInit are not null, the HAL_SMARTCARD_Init() and HAL_SMARTCARD_DeInit()
|
|
keep and use the user MspInit/MspDeInit callbacks (registered beforehand).
|
|
|
|
[..]
|
|
Callbacks can be registered/unregistered in HAL_SMARTCARD_STATE_READY state only.
|
|
Exception done MspInit/MspDeInit that can be registered/unregistered
|
|
in HAL_SMARTCARD_STATE_READY or HAL_SMARTCARD_STATE_RESET state, thus registered (user)
|
|
MspInit/DeInit callbacks can be used during the Init/DeInit.
|
|
In that case first register the MspInit/MspDeInit user callbacks
|
|
using HAL_SMARTCARD_RegisterCallback() before calling HAL_SMARTCARD_DeInit()
|
|
or HAL_SMARTCARD_Init() function.
|
|
|
|
[..]
|
|
When The compilation define USE_HAL_SMARTCARD_REGISTER_CALLBACKS is set to 0 or
|
|
not defined, the callback registration feature is not available
|
|
and weak (surcharged) callbacks are used.
|
|
|
|
|
|
@endverbatim
|
|
******************************************************************************
|
|
*/
|
|
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "stm32f7xx_hal.h"
|
|
|
|
/** @addtogroup STM32F7xx_HAL_Driver
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup SMARTCARD SMARTCARD
|
|
* @brief HAL SMARTCARD module driver
|
|
* @{
|
|
*/
|
|
|
|
#ifdef HAL_SMARTCARD_MODULE_ENABLED
|
|
|
|
/* Private typedef -----------------------------------------------------------*/
|
|
/* Private define ------------------------------------------------------------*/
|
|
/** @defgroup SMARTCARD_Private_Constants SMARTCARD Private Constants
|
|
* @{
|
|
*/
|
|
#define SMARTCARD_TEACK_REACK_TIMEOUT 1000U /*!< SMARTCARD TX or RX enable acknowledge time-out value */
|
|
|
|
#define USART_CR1_FIELDS ((uint32_t)(USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | USART_CR1_TE | \
|
|
USART_CR1_RE | USART_CR1_OVER8)) /*!< USART CR1 fields of parameters set by SMARTCARD_SetConfig API */
|
|
|
|
#define USART_CR2_CLK_FIELDS ((uint32_t)(USART_CR2_CLKEN | USART_CR2_CPOL | \
|
|
USART_CR2_CPHA | USART_CR2_LBCL)) /*!< SMARTCARD clock-related USART CR2 fields of parameters */
|
|
|
|
#define USART_CR2_FIELDS ((uint32_t)(USART_CR2_RTOEN | USART_CR2_CLK_FIELDS | \
|
|
USART_CR2_STOP)) /*!< USART CR2 fields of parameters set by SMARTCARD_SetConfig API */
|
|
|
|
#define USART_CR3_FIELDS ((uint32_t)(USART_CR3_ONEBIT | USART_CR3_NACK | \
|
|
USART_CR3_SCARCNT)) /*!< USART CR3 fields of parameters set by SMARTCARD_SetConfig API */
|
|
|
|
#define USART_BRR_MIN 0x10U /*!< USART BRR minimum authorized value */
|
|
|
|
#define USART_BRR_MAX 0x0000FFFFU /*!< USART BRR maximum authorized value */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Private macros ------------------------------------------------------------*/
|
|
/* Private variables ---------------------------------------------------------*/
|
|
/* Private function prototypes -----------------------------------------------*/
|
|
/** @addtogroup SMARTCARD_Private_Functions
|
|
* @{
|
|
*/
|
|
#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1)
|
|
void SMARTCARD_InitCallbacksToDefault(SMARTCARD_HandleTypeDef *hsmartcard);
|
|
#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACKS */
|
|
static HAL_StatusTypeDef SMARTCARD_SetConfig(SMARTCARD_HandleTypeDef *hsmartcard);
|
|
static void SMARTCARD_AdvFeatureConfig(SMARTCARD_HandleTypeDef *hsmartcard);
|
|
static HAL_StatusTypeDef SMARTCARD_CheckIdleState(SMARTCARD_HandleTypeDef *hsmartcard);
|
|
static HAL_StatusTypeDef SMARTCARD_WaitOnFlagUntilTimeout(SMARTCARD_HandleTypeDef *hsmartcard, uint32_t Flag,
|
|
FlagStatus Status, uint32_t Tickstart, uint32_t Timeout);
|
|
static void SMARTCARD_EndTxTransfer(SMARTCARD_HandleTypeDef *hsmartcard);
|
|
static void SMARTCARD_EndRxTransfer(SMARTCARD_HandleTypeDef *hsmartcard);
|
|
static void SMARTCARD_DMATransmitCplt(DMA_HandleTypeDef *hdma);
|
|
static void SMARTCARD_DMAReceiveCplt(DMA_HandleTypeDef *hdma);
|
|
static void SMARTCARD_DMAError(DMA_HandleTypeDef *hdma);
|
|
static void SMARTCARD_DMAAbortOnError(DMA_HandleTypeDef *hdma);
|
|
static void SMARTCARD_DMATxAbortCallback(DMA_HandleTypeDef *hdma);
|
|
static void SMARTCARD_DMARxAbortCallback(DMA_HandleTypeDef *hdma);
|
|
static void SMARTCARD_DMATxOnlyAbortCallback(DMA_HandleTypeDef *hdma);
|
|
static void SMARTCARD_DMARxOnlyAbortCallback(DMA_HandleTypeDef *hdma);
|
|
static void SMARTCARD_TxISR(SMARTCARD_HandleTypeDef *hsmartcard);
|
|
static void SMARTCARD_EndTransmit_IT(SMARTCARD_HandleTypeDef *hsmartcard);
|
|
static void SMARTCARD_RxISR(SMARTCARD_HandleTypeDef *hsmartcard);
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Exported functions --------------------------------------------------------*/
|
|
|
|
/** @defgroup SMARTCARD_Exported_Functions SMARTCARD Exported Functions
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup SMARTCARD_Exported_Functions_Group1 Initialization and de-initialization functions
|
|
* @brief Initialization and Configuration functions
|
|
*
|
|
@verbatim
|
|
==============================================================================
|
|
##### Initialization and Configuration functions #####
|
|
==============================================================================
|
|
[..]
|
|
This subsection provides a set of functions allowing to initialize the USARTx
|
|
associated to the SmartCard.
|
|
(+) These parameters can be configured:
|
|
(++) Baud Rate
|
|
(++) Parity: parity should be enabled, frame Length is fixed to 8 bits plus parity
|
|
(++) Receiver/transmitter modes
|
|
(++) Synchronous mode (and if enabled, phase, polarity and last bit parameters)
|
|
(++) Prescaler value
|
|
(++) Guard bit time
|
|
(++) NACK enabling or disabling on transmission error
|
|
|
|
(+) The following advanced features can be configured as well:
|
|
(++) TX and/or RX pin level inversion
|
|
(++) data logical level inversion
|
|
(++) RX and TX pins swap
|
|
(++) RX overrun detection disabling
|
|
(++) DMA disabling on RX error
|
|
(++) MSB first on communication line
|
|
(++) Time out enabling (and if activated, timeout value)
|
|
(++) Block length
|
|
(++) Auto-retry counter
|
|
[..]
|
|
The HAL_SMARTCARD_Init() API follows the USART synchronous configuration procedures
|
|
(details for the procedures are available in reference manual).
|
|
|
|
@endverbatim
|
|
|
|
The USART frame format is given in the following table:
|
|
|
|
Table 1. USART frame format.
|
|
+---------------------------------------------------------------+
|
|
| M1M0 bits | PCE bit | USART frame |
|
|
|-----------------------|---------------------------------------|
|
|
| 01 | 1 | | SB | 8 bit data | PB | STB | |
|
|
+---------------------------------------------------------------+
|
|
|
|
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Initialize the SMARTCARD mode according to the specified
|
|
* parameters in the SMARTCARD_HandleTypeDef and initialize the associated handle.
|
|
* @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
|
|
* the configuration information for the specified SMARTCARD module.
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_SMARTCARD_Init(SMARTCARD_HandleTypeDef *hsmartcard)
|
|
{
|
|
/* Check the SMARTCARD handle allocation */
|
|
if (hsmartcard == NULL)
|
|
{
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
/* Check the USART associated to the SMARTCARD handle */
|
|
assert_param(IS_SMARTCARD_INSTANCE(hsmartcard->Instance));
|
|
|
|
if (hsmartcard->gState == HAL_SMARTCARD_STATE_RESET)
|
|
{
|
|
/* Allocate lock resource and initialize it */
|
|
hsmartcard->Lock = HAL_UNLOCKED;
|
|
|
|
#if USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1
|
|
SMARTCARD_InitCallbacksToDefault(hsmartcard);
|
|
|
|
if (hsmartcard->MspInitCallback == NULL)
|
|
{
|
|
hsmartcard->MspInitCallback = HAL_SMARTCARD_MspInit;
|
|
}
|
|
|
|
/* Init the low level hardware */
|
|
hsmartcard->MspInitCallback(hsmartcard);
|
|
#else
|
|
/* Init the low level hardware : GPIO, CLOCK */
|
|
HAL_SMARTCARD_MspInit(hsmartcard);
|
|
#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACKS */
|
|
}
|
|
|
|
hsmartcard->gState = HAL_SMARTCARD_STATE_BUSY;
|
|
|
|
/* Disable the Peripheral to set smartcard mode */
|
|
CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_UE);
|
|
|
|
/* In SmartCard mode, the following bits must be kept cleared:
|
|
- LINEN in the USART_CR2 register,
|
|
- HDSEL and IREN bits in the USART_CR3 register.*/
|
|
CLEAR_BIT(hsmartcard->Instance->CR2, USART_CR2_LINEN);
|
|
CLEAR_BIT(hsmartcard->Instance->CR3, (USART_CR3_HDSEL | USART_CR3_IREN));
|
|
|
|
/* set the USART in SMARTCARD mode */
|
|
SET_BIT(hsmartcard->Instance->CR3, USART_CR3_SCEN);
|
|
|
|
/* Set the SMARTCARD Communication parameters */
|
|
if (SMARTCARD_SetConfig(hsmartcard) == HAL_ERROR)
|
|
{
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
/* Set the SMARTCARD transmission completion indication */
|
|
SMARTCARD_TRANSMISSION_COMPLETION_SETTING(hsmartcard);
|
|
|
|
if (hsmartcard->AdvancedInit.AdvFeatureInit != SMARTCARD_ADVFEATURE_NO_INIT)
|
|
{
|
|
SMARTCARD_AdvFeatureConfig(hsmartcard);
|
|
}
|
|
|
|
/* Enable the Peripheral */
|
|
SET_BIT(hsmartcard->Instance->CR1, USART_CR1_UE);
|
|
|
|
/* TEACK and/or REACK to check before moving hsmartcard->gState and hsmartcard->RxState to Ready */
|
|
return (SMARTCARD_CheckIdleState(hsmartcard));
|
|
}
|
|
|
|
/**
|
|
* @brief DeInitialize the SMARTCARD peripheral.
|
|
* @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
|
|
* the configuration information for the specified SMARTCARD module.
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_SMARTCARD_DeInit(SMARTCARD_HandleTypeDef *hsmartcard)
|
|
{
|
|
/* Check the SMARTCARD handle allocation */
|
|
if (hsmartcard == NULL)
|
|
{
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
/* Check the USART/UART associated to the SMARTCARD handle */
|
|
assert_param(IS_SMARTCARD_INSTANCE(hsmartcard->Instance));
|
|
|
|
hsmartcard->gState = HAL_SMARTCARD_STATE_BUSY;
|
|
|
|
/* Disable the Peripheral */
|
|
CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_UE);
|
|
|
|
WRITE_REG(hsmartcard->Instance->CR1, 0x0U);
|
|
WRITE_REG(hsmartcard->Instance->CR2, 0x0U);
|
|
WRITE_REG(hsmartcard->Instance->CR3, 0x0U);
|
|
WRITE_REG(hsmartcard->Instance->RTOR, 0x0U);
|
|
WRITE_REG(hsmartcard->Instance->GTPR, 0x0U);
|
|
|
|
/* DeInit the low level hardware */
|
|
#if USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1
|
|
if (hsmartcard->MspDeInitCallback == NULL)
|
|
{
|
|
hsmartcard->MspDeInitCallback = HAL_SMARTCARD_MspDeInit;
|
|
}
|
|
/* DeInit the low level hardware */
|
|
hsmartcard->MspDeInitCallback(hsmartcard);
|
|
#else
|
|
HAL_SMARTCARD_MspDeInit(hsmartcard);
|
|
#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACKS */
|
|
|
|
hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
|
|
hsmartcard->gState = HAL_SMARTCARD_STATE_RESET;
|
|
hsmartcard->RxState = HAL_SMARTCARD_STATE_RESET;
|
|
|
|
/* Process Unlock */
|
|
__HAL_UNLOCK(hsmartcard);
|
|
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief Initialize the SMARTCARD MSP.
|
|
* @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
|
|
* the configuration information for the specified SMARTCARD module.
|
|
* @retval None
|
|
*/
|
|
__weak void HAL_SMARTCARD_MspInit(SMARTCARD_HandleTypeDef *hsmartcard)
|
|
{
|
|
/* Prevent unused argument(s) compilation warning */
|
|
UNUSED(hsmartcard);
|
|
|
|
/* NOTE : This function should not be modified, when the callback is needed,
|
|
the HAL_SMARTCARD_MspInit can be implemented in the user file
|
|
*/
|
|
}
|
|
|
|
/**
|
|
* @brief DeInitialize the SMARTCARD MSP.
|
|
* @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
|
|
* the configuration information for the specified SMARTCARD module.
|
|
* @retval None
|
|
*/
|
|
__weak void HAL_SMARTCARD_MspDeInit(SMARTCARD_HandleTypeDef *hsmartcard)
|
|
{
|
|
/* Prevent unused argument(s) compilation warning */
|
|
UNUSED(hsmartcard);
|
|
|
|
/* NOTE : This function should not be modified, when the callback is needed,
|
|
the HAL_SMARTCARD_MspDeInit can be implemented in the user file
|
|
*/
|
|
}
|
|
|
|
#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1)
|
|
/**
|
|
* @brief Register a User SMARTCARD Callback
|
|
* To be used instead of the weak predefined callback
|
|
* @param hsmartcard smartcard handle
|
|
* @param CallbackID ID of the callback to be registered
|
|
* This parameter can be one of the following values:
|
|
* @arg @ref HAL_SMARTCARD_TX_COMPLETE_CB_ID Tx Complete Callback ID
|
|
* @arg @ref HAL_SMARTCARD_RX_COMPLETE_CB_ID Rx Complete Callback ID
|
|
* @arg @ref HAL_SMARTCARD_ERROR_CB_ID Error Callback ID
|
|
* @arg @ref HAL_SMARTCARD_ABORT_COMPLETE_CB_ID Abort Complete Callback ID
|
|
* @arg @ref HAL_SMARTCARD_ABORT_TRANSMIT_COMPLETE_CB_ID Abort Transmit Complete Callback ID
|
|
* @arg @ref HAL_SMARTCARD_ABORT_RECEIVE_COMPLETE_CB_ID Abort Receive Complete Callback ID
|
|
* @arg @ref HAL_SMARTCARD_MSPINIT_CB_ID MspInit Callback ID
|
|
* @arg @ref HAL_SMARTCARD_MSPDEINIT_CB_ID MspDeInit Callback ID
|
|
* @param pCallback pointer to the Callback function
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_SMARTCARD_RegisterCallback(SMARTCARD_HandleTypeDef *hsmartcard,
|
|
HAL_SMARTCARD_CallbackIDTypeDef CallbackID,
|
|
pSMARTCARD_CallbackTypeDef pCallback)
|
|
{
|
|
HAL_StatusTypeDef status = HAL_OK;
|
|
|
|
if (pCallback == NULL)
|
|
{
|
|
/* Update the error code */
|
|
hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_INVALID_CALLBACK;
|
|
|
|
return HAL_ERROR;
|
|
}
|
|
/* Process locked */
|
|
__HAL_LOCK(hsmartcard);
|
|
|
|
if (hsmartcard->gState == HAL_SMARTCARD_STATE_READY)
|
|
{
|
|
switch (CallbackID)
|
|
{
|
|
|
|
case HAL_SMARTCARD_TX_COMPLETE_CB_ID :
|
|
hsmartcard->TxCpltCallback = pCallback;
|
|
break;
|
|
|
|
case HAL_SMARTCARD_RX_COMPLETE_CB_ID :
|
|
hsmartcard->RxCpltCallback = pCallback;
|
|
break;
|
|
|
|
case HAL_SMARTCARD_ERROR_CB_ID :
|
|
hsmartcard->ErrorCallback = pCallback;
|
|
break;
|
|
|
|
case HAL_SMARTCARD_ABORT_COMPLETE_CB_ID :
|
|
hsmartcard->AbortCpltCallback = pCallback;
|
|
break;
|
|
|
|
case HAL_SMARTCARD_ABORT_TRANSMIT_COMPLETE_CB_ID :
|
|
hsmartcard->AbortTransmitCpltCallback = pCallback;
|
|
break;
|
|
|
|
case HAL_SMARTCARD_ABORT_RECEIVE_COMPLETE_CB_ID :
|
|
hsmartcard->AbortReceiveCpltCallback = pCallback;
|
|
break;
|
|
|
|
|
|
case HAL_SMARTCARD_MSPINIT_CB_ID :
|
|
hsmartcard->MspInitCallback = pCallback;
|
|
break;
|
|
|
|
case HAL_SMARTCARD_MSPDEINIT_CB_ID :
|
|
hsmartcard->MspDeInitCallback = pCallback;
|
|
break;
|
|
|
|
default :
|
|
/* Update the error code */
|
|
hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_INVALID_CALLBACK;
|
|
|
|
/* Return error status */
|
|
status = HAL_ERROR;
|
|
break;
|
|
}
|
|
}
|
|
else if (hsmartcard->gState == HAL_SMARTCARD_STATE_RESET)
|
|
{
|
|
switch (CallbackID)
|
|
{
|
|
case HAL_SMARTCARD_MSPINIT_CB_ID :
|
|
hsmartcard->MspInitCallback = pCallback;
|
|
break;
|
|
|
|
case HAL_SMARTCARD_MSPDEINIT_CB_ID :
|
|
hsmartcard->MspDeInitCallback = pCallback;
|
|
break;
|
|
|
|
default :
|
|
/* Update the error code */
|
|
hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_INVALID_CALLBACK;
|
|
|
|
/* Return error status */
|
|
status = HAL_ERROR;
|
|
break;
|
|
}
|
|
}
|
|
else
|
|
{
|
|
/* Update the error code */
|
|
hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_INVALID_CALLBACK;
|
|
|
|
/* Return error status */
|
|
status = HAL_ERROR;
|
|
}
|
|
|
|
/* Release Lock */
|
|
__HAL_UNLOCK(hsmartcard);
|
|
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* @brief Unregister an SMARTCARD callback
|
|
* SMARTCARD callback is redirected to the weak predefined callback
|
|
* @param hsmartcard smartcard handle
|
|
* @param CallbackID ID of the callback to be unregistered
|
|
* This parameter can be one of the following values:
|
|
* @arg @ref HAL_SMARTCARD_TX_COMPLETE_CB_ID Tx Complete Callback ID
|
|
* @arg @ref HAL_SMARTCARD_RX_COMPLETE_CB_ID Rx Complete Callback ID
|
|
* @arg @ref HAL_SMARTCARD_ERROR_CB_ID Error Callback ID
|
|
* @arg @ref HAL_SMARTCARD_ABORT_COMPLETE_CB_ID Abort Complete Callback ID
|
|
* @arg @ref HAL_SMARTCARD_ABORT_TRANSMIT_COMPLETE_CB_ID Abort Transmit Complete Callback ID
|
|
* @arg @ref HAL_SMARTCARD_ABORT_RECEIVE_COMPLETE_CB_ID Abort Receive Complete Callback ID
|
|
* @arg @ref HAL_SMARTCARD_MSPINIT_CB_ID MspInit Callback ID
|
|
* @arg @ref HAL_SMARTCARD_MSPDEINIT_CB_ID MspDeInit Callback ID
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_SMARTCARD_UnRegisterCallback(SMARTCARD_HandleTypeDef *hsmartcard,
|
|
HAL_SMARTCARD_CallbackIDTypeDef CallbackID)
|
|
{
|
|
HAL_StatusTypeDef status = HAL_OK;
|
|
|
|
/* Process locked */
|
|
__HAL_LOCK(hsmartcard);
|
|
|
|
if (HAL_SMARTCARD_STATE_READY == hsmartcard->gState)
|
|
{
|
|
switch (CallbackID)
|
|
{
|
|
case HAL_SMARTCARD_TX_COMPLETE_CB_ID :
|
|
hsmartcard->TxCpltCallback = HAL_SMARTCARD_TxCpltCallback; /* Legacy weak TxCpltCallback */
|
|
break;
|
|
|
|
case HAL_SMARTCARD_RX_COMPLETE_CB_ID :
|
|
hsmartcard->RxCpltCallback = HAL_SMARTCARD_RxCpltCallback; /* Legacy weak RxCpltCallback */
|
|
break;
|
|
|
|
case HAL_SMARTCARD_ERROR_CB_ID :
|
|
hsmartcard->ErrorCallback = HAL_SMARTCARD_ErrorCallback; /* Legacy weak ErrorCallback */
|
|
break;
|
|
|
|
case HAL_SMARTCARD_ABORT_COMPLETE_CB_ID :
|
|
hsmartcard->AbortCpltCallback = HAL_SMARTCARD_AbortCpltCallback; /* Legacy weak AbortCpltCallback */
|
|
break;
|
|
|
|
case HAL_SMARTCARD_ABORT_TRANSMIT_COMPLETE_CB_ID :
|
|
hsmartcard->AbortTransmitCpltCallback = HAL_SMARTCARD_AbortTransmitCpltCallback; /* Legacy weak
|
|
AbortTransmitCpltCallback*/
|
|
break;
|
|
|
|
case HAL_SMARTCARD_ABORT_RECEIVE_COMPLETE_CB_ID :
|
|
hsmartcard->AbortReceiveCpltCallback = HAL_SMARTCARD_AbortReceiveCpltCallback; /* Legacy weak
|
|
AbortReceiveCpltCallback */
|
|
break;
|
|
|
|
|
|
case HAL_SMARTCARD_MSPINIT_CB_ID :
|
|
hsmartcard->MspInitCallback = HAL_SMARTCARD_MspInit; /* Legacy weak MspInitCallback */
|
|
break;
|
|
|
|
case HAL_SMARTCARD_MSPDEINIT_CB_ID :
|
|
hsmartcard->MspDeInitCallback = HAL_SMARTCARD_MspDeInit; /* Legacy weak MspDeInitCallback */
|
|
break;
|
|
|
|
default :
|
|
/* Update the error code */
|
|
hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_INVALID_CALLBACK;
|
|
|
|
/* Return error status */
|
|
status = HAL_ERROR;
|
|
break;
|
|
}
|
|
}
|
|
else if (HAL_SMARTCARD_STATE_RESET == hsmartcard->gState)
|
|
{
|
|
switch (CallbackID)
|
|
{
|
|
case HAL_SMARTCARD_MSPINIT_CB_ID :
|
|
hsmartcard->MspInitCallback = HAL_SMARTCARD_MspInit;
|
|
break;
|
|
|
|
case HAL_SMARTCARD_MSPDEINIT_CB_ID :
|
|
hsmartcard->MspDeInitCallback = HAL_SMARTCARD_MspDeInit;
|
|
break;
|
|
|
|
default :
|
|
/* Update the error code */
|
|
hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_INVALID_CALLBACK;
|
|
|
|
/* Return error status */
|
|
status = HAL_ERROR;
|
|
break;
|
|
}
|
|
}
|
|
else
|
|
{
|
|
/* Update the error code */
|
|
hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_INVALID_CALLBACK;
|
|
|
|
/* Return error status */
|
|
status = HAL_ERROR;
|
|
}
|
|
|
|
/* Release Lock */
|
|
__HAL_UNLOCK(hsmartcard);
|
|
|
|
return status;
|
|
}
|
|
#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACKS */
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup SMARTCARD_Exported_Functions_Group2 IO operation functions
|
|
* @brief SMARTCARD Transmit and Receive functions
|
|
*
|
|
@verbatim
|
|
==============================================================================
|
|
##### IO operation functions #####
|
|
==============================================================================
|
|
[..]
|
|
This subsection provides a set of functions allowing to manage the SMARTCARD data transfers.
|
|
|
|
[..]
|
|
Smartcard is a single wire half duplex communication protocol.
|
|
The Smartcard interface is designed to support asynchronous protocol Smartcards as
|
|
defined in the ISO 7816-3 standard. The USART should be configured as:
|
|
(+) 8 bits plus parity: where M=1 and PCE=1 in the USART_CR1 register
|
|
(+) 1.5 stop bits when transmitting and receiving: where STOP=11 in the USART_CR2 register.
|
|
|
|
[..]
|
|
(#) There are two modes of transfer:
|
|
(##) Blocking mode: The communication is performed in polling mode.
|
|
The HAL status of all data processing is returned by the same function
|
|
after finishing transfer.
|
|
(##) Non-Blocking mode: The communication is performed using Interrupts
|
|
or DMA, the relevant API's return the HAL status.
|
|
The end of the data processing will be indicated through the
|
|
dedicated SMARTCARD IRQ when using Interrupt mode or the DMA IRQ when
|
|
using DMA mode.
|
|
(##) The HAL_SMARTCARD_TxCpltCallback(), HAL_SMARTCARD_RxCpltCallback() user callbacks
|
|
will be executed respectively at the end of the Transmit or Receive process
|
|
The HAL_SMARTCARD_ErrorCallback() user callback will be executed when a communication
|
|
error is detected.
|
|
|
|
(#) Blocking mode APIs are :
|
|
(##) HAL_SMARTCARD_Transmit()
|
|
(##) HAL_SMARTCARD_Receive()
|
|
|
|
(#) Non Blocking mode APIs with Interrupt are :
|
|
(##) HAL_SMARTCARD_Transmit_IT()
|
|
(##) HAL_SMARTCARD_Receive_IT()
|
|
(##) HAL_SMARTCARD_IRQHandler()
|
|
|
|
(#) Non Blocking mode functions with DMA are :
|
|
(##) HAL_SMARTCARD_Transmit_DMA()
|
|
(##) HAL_SMARTCARD_Receive_DMA()
|
|
|
|
(#) A set of Transfer Complete Callbacks are provided in non Blocking mode:
|
|
(##) HAL_SMARTCARD_TxCpltCallback()
|
|
(##) HAL_SMARTCARD_RxCpltCallback()
|
|
(##) HAL_SMARTCARD_ErrorCallback()
|
|
|
|
[..]
|
|
(#) Non-Blocking mode transfers could be aborted using Abort API's :
|
|
(##) HAL_SMARTCARD_Abort()
|
|
(##) HAL_SMARTCARD_AbortTransmit()
|
|
(##) HAL_SMARTCARD_AbortReceive()
|
|
(##) HAL_SMARTCARD_Abort_IT()
|
|
(##) HAL_SMARTCARD_AbortTransmit_IT()
|
|
(##) HAL_SMARTCARD_AbortReceive_IT()
|
|
|
|
(#) For Abort services based on interrupts (HAL_SMARTCARD_Abortxxx_IT),
|
|
a set of Abort Complete Callbacks are provided:
|
|
(##) HAL_SMARTCARD_AbortCpltCallback()
|
|
(##) HAL_SMARTCARD_AbortTransmitCpltCallback()
|
|
(##) HAL_SMARTCARD_AbortReceiveCpltCallback()
|
|
|
|
(#) In Non-Blocking mode transfers, possible errors are split into 2 categories.
|
|
Errors are handled as follows :
|
|
(##) Error is considered as Recoverable and non blocking : Transfer could go till end, but error severity is
|
|
to be evaluated by user : this concerns Frame Error,
|
|
Parity Error or Noise Error in Interrupt mode reception .
|
|
Received character is then retrieved and stored in Rx buffer,
|
|
Error code is set to allow user to identify error type,
|
|
and HAL_SMARTCARD_ErrorCallback() user callback is executed. Transfer is kept ongoing on SMARTCARD side.
|
|
If user wants to abort it, Abort services should be called by user.
|
|
(##) Error is considered as Blocking : Transfer could not be completed properly and is aborted.
|
|
This concerns Frame Error in Interrupt mode transmission, Overrun Error in Interrupt
|
|
mode reception and all errors in DMA mode.
|
|
Error code is set to allow user to identify error type,
|
|
and HAL_SMARTCARD_ErrorCallback() user callback is executed.
|
|
|
|
@endverbatim
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Send an amount of data in blocking mode.
|
|
* @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
|
|
* the configuration information for the specified SMARTCARD module.
|
|
* @param pData pointer to data buffer.
|
|
* @param Size amount of data to be sent.
|
|
* @param Timeout Timeout duration.
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_SMARTCARD_Transmit(SMARTCARD_HandleTypeDef *hsmartcard, const uint8_t *pData, uint16_t Size,
|
|
uint32_t Timeout)
|
|
{
|
|
uint32_t tickstart;
|
|
const uint8_t *ptmpdata = pData;
|
|
|
|
/* Check that a Tx process is not already ongoing */
|
|
if (hsmartcard->gState == HAL_SMARTCARD_STATE_READY)
|
|
{
|
|
if ((ptmpdata == NULL) || (Size == 0U))
|
|
{
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
/* Process Locked */
|
|
__HAL_LOCK(hsmartcard);
|
|
|
|
hsmartcard->gState = HAL_SMARTCARD_STATE_BUSY_TX;
|
|
|
|
/* Init tickstart for timeout management */
|
|
tickstart = HAL_GetTick();
|
|
|
|
/* Disable the Peripheral first to update mode for TX master */
|
|
CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_UE);
|
|
|
|
/* In case of TX only mode, if NACK is enabled, the USART must be able to monitor
|
|
the bidirectional line to detect a NACK signal in case of parity error.
|
|
Therefore, the receiver block must be enabled as well (RE bit must be set). */
|
|
if ((hsmartcard->Init.Mode == SMARTCARD_MODE_TX)
|
|
&& (hsmartcard->Init.NACKEnable == SMARTCARD_NACK_ENABLE))
|
|
{
|
|
SET_BIT(hsmartcard->Instance->CR1, USART_CR1_RE);
|
|
}
|
|
/* Enable Tx */
|
|
SET_BIT(hsmartcard->Instance->CR1, USART_CR1_TE);
|
|
|
|
/* Enable the Peripheral */
|
|
SET_BIT(hsmartcard->Instance->CR1, USART_CR1_UE);
|
|
|
|
/* Perform a TX/RX FIFO Flush */
|
|
__HAL_SMARTCARD_FLUSH_DRREGISTER(hsmartcard);
|
|
|
|
hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
|
|
hsmartcard->TxXferSize = Size;
|
|
hsmartcard->TxXferCount = Size;
|
|
|
|
while (hsmartcard->TxXferCount > 0U)
|
|
{
|
|
hsmartcard->TxXferCount--;
|
|
if (SMARTCARD_WaitOnFlagUntilTimeout(hsmartcard, SMARTCARD_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK)
|
|
{
|
|
return HAL_TIMEOUT;
|
|
}
|
|
hsmartcard->Instance->TDR = (uint8_t)(*ptmpdata & 0xFFU);
|
|
ptmpdata++;
|
|
}
|
|
if (SMARTCARD_WaitOnFlagUntilTimeout(hsmartcard, SMARTCARD_TRANSMISSION_COMPLETION_FLAG(hsmartcard), RESET,
|
|
tickstart, Timeout) != HAL_OK)
|
|
{
|
|
return HAL_TIMEOUT;
|
|
}
|
|
|
|
/* Disable the Peripheral first to update mode */
|
|
CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_UE);
|
|
if ((hsmartcard->Init.Mode == SMARTCARD_MODE_TX)
|
|
&& (hsmartcard->Init.NACKEnable == SMARTCARD_NACK_ENABLE))
|
|
{
|
|
/* In case of TX only mode, if NACK is enabled, receiver block has been enabled
|
|
for Transmit phase. Disable this receiver block. */
|
|
CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_RE);
|
|
}
|
|
if ((hsmartcard->Init.Mode == SMARTCARD_MODE_TX_RX)
|
|
|| (hsmartcard->Init.NACKEnable == SMARTCARD_NACK_ENABLE))
|
|
{
|
|
/* Perform a TX FIFO Flush at end of Tx phase, as all sent bytes are appearing in Rx Data register */
|
|
__HAL_SMARTCARD_FLUSH_DRREGISTER(hsmartcard);
|
|
}
|
|
SET_BIT(hsmartcard->Instance->CR1, USART_CR1_UE);
|
|
|
|
/* At end of Tx process, restore hsmartcard->gState to Ready */
|
|
hsmartcard->gState = HAL_SMARTCARD_STATE_READY;
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hsmartcard);
|
|
|
|
return HAL_OK;
|
|
}
|
|
else
|
|
{
|
|
return HAL_BUSY;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Receive an amount of data in blocking mode.
|
|
* @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
|
|
* the configuration information for the specified SMARTCARD module.
|
|
* @param pData pointer to data buffer.
|
|
* @param Size amount of data to be received.
|
|
* @param Timeout Timeout duration.
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_SMARTCARD_Receive(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size,
|
|
uint32_t Timeout)
|
|
{
|
|
uint32_t tickstart;
|
|
uint8_t *ptmpdata = pData;
|
|
|
|
/* Check that a Rx process is not already ongoing */
|
|
if (hsmartcard->RxState == HAL_SMARTCARD_STATE_READY)
|
|
{
|
|
if ((ptmpdata == NULL) || (Size == 0U))
|
|
{
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
/* Process Locked */
|
|
__HAL_LOCK(hsmartcard);
|
|
|
|
hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
|
|
hsmartcard->RxState = HAL_SMARTCARD_STATE_BUSY_RX;
|
|
|
|
/* Init tickstart for timeout management */
|
|
tickstart = HAL_GetTick();
|
|
|
|
hsmartcard->RxXferSize = Size;
|
|
hsmartcard->RxXferCount = Size;
|
|
|
|
/* Check the remain data to be received */
|
|
while (hsmartcard->RxXferCount > 0U)
|
|
{
|
|
hsmartcard->RxXferCount--;
|
|
|
|
if (SMARTCARD_WaitOnFlagUntilTimeout(hsmartcard, SMARTCARD_FLAG_RXNE, RESET, tickstart, Timeout) != HAL_OK)
|
|
{
|
|
return HAL_TIMEOUT;
|
|
}
|
|
*ptmpdata = (uint8_t)(hsmartcard->Instance->RDR & (uint8_t)0x00FF);
|
|
ptmpdata++;
|
|
}
|
|
|
|
/* At end of Rx process, restore hsmartcard->RxState to Ready */
|
|
hsmartcard->RxState = HAL_SMARTCARD_STATE_READY;
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hsmartcard);
|
|
|
|
return HAL_OK;
|
|
}
|
|
else
|
|
{
|
|
return HAL_BUSY;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Send an amount of data in interrupt mode.
|
|
* @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
|
|
* the configuration information for the specified SMARTCARD module.
|
|
* @param pData pointer to data buffer.
|
|
* @param Size amount of data to be sent.
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_SMARTCARD_Transmit_IT(SMARTCARD_HandleTypeDef *hsmartcard, const uint8_t *pData, uint16_t Size)
|
|
{
|
|
/* Check that a Tx process is not already ongoing */
|
|
if (hsmartcard->gState == HAL_SMARTCARD_STATE_READY)
|
|
{
|
|
if ((pData == NULL) || (Size == 0U))
|
|
{
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
/* Process Locked */
|
|
__HAL_LOCK(hsmartcard);
|
|
|
|
hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
|
|
hsmartcard->gState = HAL_SMARTCARD_STATE_BUSY_TX;
|
|
|
|
hsmartcard->pTxBuffPtr = pData;
|
|
hsmartcard->TxXferSize = Size;
|
|
hsmartcard->TxXferCount = Size;
|
|
hsmartcard->TxISR = NULL;
|
|
|
|
/* Disable the Peripheral first to update mode for TX master */
|
|
CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_UE);
|
|
|
|
/* In case of TX only mode, if NACK is enabled, the USART must be able to monitor
|
|
the bidirectional line to detect a NACK signal in case of parity error.
|
|
Therefore, the receiver block must be enabled as well (RE bit must be set). */
|
|
if ((hsmartcard->Init.Mode == SMARTCARD_MODE_TX)
|
|
&& (hsmartcard->Init.NACKEnable == SMARTCARD_NACK_ENABLE))
|
|
{
|
|
SET_BIT(hsmartcard->Instance->CR1, USART_CR1_RE);
|
|
}
|
|
/* Enable Tx */
|
|
SET_BIT(hsmartcard->Instance->CR1, USART_CR1_TE);
|
|
|
|
/* Enable the Peripheral */
|
|
SET_BIT(hsmartcard->Instance->CR1, USART_CR1_UE);
|
|
|
|
/* Perform a TX/RX FIFO Flush */
|
|
__HAL_SMARTCARD_FLUSH_DRREGISTER(hsmartcard);
|
|
|
|
/* Configure Tx interrupt processing */
|
|
/* Set the Tx ISR function pointer */
|
|
hsmartcard->TxISR = SMARTCARD_TxISR;
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hsmartcard);
|
|
|
|
/* Enable the SMARTCARD Error Interrupt: (Frame error) */
|
|
SET_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE);
|
|
|
|
/* Enable the SMARTCARD Transmit Data Register Empty Interrupt */
|
|
SET_BIT(hsmartcard->Instance->CR1, USART_CR1_TXEIE);
|
|
|
|
return HAL_OK;
|
|
}
|
|
else
|
|
{
|
|
return HAL_BUSY;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Receive an amount of data in interrupt mode.
|
|
* @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
|
|
* the configuration information for the specified SMARTCARD module.
|
|
* @param pData pointer to data buffer.
|
|
* @param Size amount of data to be received.
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_SMARTCARD_Receive_IT(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size)
|
|
{
|
|
/* Check that a Rx process is not already ongoing */
|
|
if (hsmartcard->RxState == HAL_SMARTCARD_STATE_READY)
|
|
{
|
|
if ((pData == NULL) || (Size == 0U))
|
|
{
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
/* Process Locked */
|
|
__HAL_LOCK(hsmartcard);
|
|
|
|
hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
|
|
hsmartcard->RxState = HAL_SMARTCARD_STATE_BUSY_RX;
|
|
|
|
hsmartcard->pRxBuffPtr = pData;
|
|
hsmartcard->RxXferSize = Size;
|
|
hsmartcard->RxXferCount = Size;
|
|
|
|
/* Configure Rx interrupt processing */
|
|
/* Set the Rx ISR function pointer */
|
|
hsmartcard->RxISR = SMARTCARD_RxISR;
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hsmartcard);
|
|
|
|
/* Enable the SMARTCARD Parity Error and Data Register not empty Interrupts */
|
|
SET_BIT(hsmartcard->Instance->CR1, USART_CR1_PEIE | USART_CR1_RXNEIE);
|
|
|
|
/* Enable the SMARTCARD Error Interrupt: (Frame error, noise error, overrun error) */
|
|
SET_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE);
|
|
|
|
return HAL_OK;
|
|
}
|
|
else
|
|
{
|
|
return HAL_BUSY;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Send an amount of data in DMA mode.
|
|
* @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
|
|
* the configuration information for the specified SMARTCARD module.
|
|
* @param pData pointer to data buffer.
|
|
* @param Size amount of data to be sent.
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_SMARTCARD_Transmit_DMA(SMARTCARD_HandleTypeDef *hsmartcard, const uint8_t *pData, uint16_t Size)
|
|
{
|
|
/* Check that a Tx process is not already ongoing */
|
|
if (hsmartcard->gState == HAL_SMARTCARD_STATE_READY)
|
|
{
|
|
if ((pData == NULL) || (Size == 0U))
|
|
{
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
/* Process Locked */
|
|
__HAL_LOCK(hsmartcard);
|
|
|
|
hsmartcard->gState = HAL_SMARTCARD_STATE_BUSY_TX;
|
|
|
|
hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
|
|
hsmartcard->pTxBuffPtr = pData;
|
|
hsmartcard->TxXferSize = Size;
|
|
hsmartcard->TxXferCount = Size;
|
|
|
|
/* Disable the Peripheral first to update mode for TX master */
|
|
CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_UE);
|
|
|
|
/* In case of TX only mode, if NACK is enabled, the USART must be able to monitor
|
|
the bidirectional line to detect a NACK signal in case of parity error.
|
|
Therefore, the receiver block must be enabled as well (RE bit must be set). */
|
|
if ((hsmartcard->Init.Mode == SMARTCARD_MODE_TX)
|
|
&& (hsmartcard->Init.NACKEnable == SMARTCARD_NACK_ENABLE))
|
|
{
|
|
SET_BIT(hsmartcard->Instance->CR1, USART_CR1_RE);
|
|
}
|
|
/* Enable Tx */
|
|
SET_BIT(hsmartcard->Instance->CR1, USART_CR1_TE);
|
|
|
|
/* Enable the Peripheral */
|
|
SET_BIT(hsmartcard->Instance->CR1, USART_CR1_UE);
|
|
|
|
/* Perform a TX/RX FIFO Flush */
|
|
__HAL_SMARTCARD_FLUSH_DRREGISTER(hsmartcard);
|
|
|
|
/* Set the SMARTCARD DMA transfer complete callback */
|
|
hsmartcard->hdmatx->XferCpltCallback = SMARTCARD_DMATransmitCplt;
|
|
|
|
/* Set the SMARTCARD error callback */
|
|
hsmartcard->hdmatx->XferErrorCallback = SMARTCARD_DMAError;
|
|
|
|
/* Set the DMA abort callback */
|
|
hsmartcard->hdmatx->XferAbortCallback = NULL;
|
|
|
|
/* Enable the SMARTCARD transmit DMA channel */
|
|
if (HAL_DMA_Start_IT(hsmartcard->hdmatx, (uint32_t)hsmartcard->pTxBuffPtr, (uint32_t)&hsmartcard->Instance->TDR,
|
|
Size) == HAL_OK)
|
|
{
|
|
/* Clear the TC flag in the ICR register */
|
|
CLEAR_BIT(hsmartcard->Instance->ICR, USART_ICR_TCCF);
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hsmartcard);
|
|
|
|
/* Enable the UART Error Interrupt: (Frame error) */
|
|
SET_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE);
|
|
|
|
/* Enable the DMA transfer for transmit request by setting the DMAT bit
|
|
in the SMARTCARD associated USART CR3 register */
|
|
SET_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAT);
|
|
|
|
return HAL_OK;
|
|
}
|
|
else
|
|
{
|
|
/* Set error code to DMA */
|
|
hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_DMA;
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hsmartcard);
|
|
|
|
/* Restore hsmartcard->State to ready */
|
|
hsmartcard->gState = HAL_SMARTCARD_STATE_READY;
|
|
|
|
return HAL_ERROR;
|
|
}
|
|
}
|
|
else
|
|
{
|
|
return HAL_BUSY;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Receive an amount of data in DMA mode.
|
|
* @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
|
|
* the configuration information for the specified SMARTCARD module.
|
|
* @param pData pointer to data buffer.
|
|
* @param Size amount of data to be received.
|
|
* @note The SMARTCARD-associated USART parity is enabled (PCE = 1),
|
|
* the received data contain the parity bit (MSB position).
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_SMARTCARD_Receive_DMA(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size)
|
|
{
|
|
/* Check that a Rx process is not already ongoing */
|
|
if (hsmartcard->RxState == HAL_SMARTCARD_STATE_READY)
|
|
{
|
|
if ((pData == NULL) || (Size == 0U))
|
|
{
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
/* Process Locked */
|
|
__HAL_LOCK(hsmartcard);
|
|
|
|
hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
|
|
hsmartcard->RxState = HAL_SMARTCARD_STATE_BUSY_RX;
|
|
|
|
hsmartcard->pRxBuffPtr = pData;
|
|
hsmartcard->RxXferSize = Size;
|
|
|
|
/* Set the SMARTCARD DMA transfer complete callback */
|
|
hsmartcard->hdmarx->XferCpltCallback = SMARTCARD_DMAReceiveCplt;
|
|
|
|
/* Set the SMARTCARD DMA error callback */
|
|
hsmartcard->hdmarx->XferErrorCallback = SMARTCARD_DMAError;
|
|
|
|
/* Set the DMA abort callback */
|
|
hsmartcard->hdmarx->XferAbortCallback = NULL;
|
|
|
|
/* Enable the DMA channel */
|
|
if (HAL_DMA_Start_IT(hsmartcard->hdmarx, (uint32_t)&hsmartcard->Instance->RDR, (uint32_t)hsmartcard->pRxBuffPtr,
|
|
Size) == HAL_OK)
|
|
{
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hsmartcard);
|
|
|
|
/* Enable the SMARTCARD Parity Error Interrupt */
|
|
SET_BIT(hsmartcard->Instance->CR1, USART_CR1_PEIE);
|
|
|
|
/* Enable the SMARTCARD Error Interrupt: (Frame error, noise error, overrun error) */
|
|
SET_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE);
|
|
|
|
/* Enable the DMA transfer for the receiver request by setting the DMAR bit
|
|
in the SMARTCARD associated USART CR3 register */
|
|
SET_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAR);
|
|
|
|
return HAL_OK;
|
|
}
|
|
else
|
|
{
|
|
/* Set error code to DMA */
|
|
hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_DMA;
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hsmartcard);
|
|
|
|
/* Restore hsmartcard->State to ready */
|
|
hsmartcard->RxState = HAL_SMARTCARD_STATE_READY;
|
|
|
|
return HAL_ERROR;
|
|
}
|
|
}
|
|
else
|
|
{
|
|
return HAL_BUSY;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Abort ongoing transfers (blocking mode).
|
|
* @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
|
|
* the configuration information for the specified SMARTCARD module.
|
|
* @note This procedure could be used for aborting any ongoing transfer started in Interrupt or DMA mode.
|
|
* This procedure performs following operations :
|
|
* - Disable SMARTCARD Interrupts (Tx and Rx)
|
|
* - Disable the DMA transfer in the peripheral register (if enabled)
|
|
* - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode)
|
|
* - Set handle State to READY
|
|
* @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed.
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_SMARTCARD_Abort(SMARTCARD_HandleTypeDef *hsmartcard)
|
|
{
|
|
/* Disable RTOIE, EOBIE, TXEIE, TCIE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */
|
|
CLEAR_BIT(hsmartcard->Instance->CR1,
|
|
(USART_CR1_RXNEIE | USART_CR1_PEIE | USART_CR1_TXEIE | USART_CR1_TCIE | USART_CR1_RTOIE |
|
|
USART_CR1_EOBIE));
|
|
CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE);
|
|
|
|
/* Disable the SMARTCARD DMA Tx request if enabled */
|
|
if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAT))
|
|
{
|
|
CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAT);
|
|
|
|
/* Abort the SMARTCARD DMA Tx channel : use blocking DMA Abort API (no callback) */
|
|
if (hsmartcard->hdmatx != NULL)
|
|
{
|
|
/* Set the SMARTCARD DMA Abort callback to Null.
|
|
No call back execution at end of DMA abort procedure */
|
|
hsmartcard->hdmatx->XferAbortCallback = NULL;
|
|
|
|
if (HAL_DMA_Abort(hsmartcard->hdmatx) != HAL_OK)
|
|
{
|
|
if (HAL_DMA_GetError(hsmartcard->hdmatx) == HAL_DMA_ERROR_TIMEOUT)
|
|
{
|
|
/* Set error code to DMA */
|
|
hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_DMA;
|
|
|
|
return HAL_TIMEOUT;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Disable the SMARTCARD DMA Rx request if enabled */
|
|
if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAR))
|
|
{
|
|
CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAR);
|
|
|
|
/* Abort the SMARTCARD DMA Rx channel : use blocking DMA Abort API (no callback) */
|
|
if (hsmartcard->hdmarx != NULL)
|
|
{
|
|
/* Set the SMARTCARD DMA Abort callback to Null.
|
|
No call back execution at end of DMA abort procedure */
|
|
hsmartcard->hdmarx->XferAbortCallback = NULL;
|
|
|
|
if (HAL_DMA_Abort(hsmartcard->hdmarx) != HAL_OK)
|
|
{
|
|
if (HAL_DMA_GetError(hsmartcard->hdmarx) == HAL_DMA_ERROR_TIMEOUT)
|
|
{
|
|
/* Set error code to DMA */
|
|
hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_DMA;
|
|
|
|
return HAL_TIMEOUT;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Reset Tx and Rx transfer counters */
|
|
hsmartcard->TxXferCount = 0U;
|
|
hsmartcard->RxXferCount = 0U;
|
|
|
|
/* Clear the Error flags in the ICR register */
|
|
__HAL_SMARTCARD_CLEAR_FLAG(hsmartcard,
|
|
SMARTCARD_CLEAR_OREF | SMARTCARD_CLEAR_NEF | SMARTCARD_CLEAR_PEF | SMARTCARD_CLEAR_FEF |
|
|
SMARTCARD_CLEAR_RTOF | SMARTCARD_CLEAR_EOBF);
|
|
|
|
/* Restore hsmartcard->gState and hsmartcard->RxState to Ready */
|
|
hsmartcard->gState = HAL_SMARTCARD_STATE_READY;
|
|
hsmartcard->RxState = HAL_SMARTCARD_STATE_READY;
|
|
|
|
/* Reset Handle ErrorCode to No Error */
|
|
hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
|
|
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief Abort ongoing Transmit transfer (blocking mode).
|
|
* @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
|
|
* the configuration information for the specified SMARTCARD module.
|
|
* @note This procedure could be used for aborting any ongoing Tx transfer started in Interrupt or DMA mode.
|
|
* This procedure performs following operations :
|
|
* - Disable SMARTCARD Interrupts (Tx)
|
|
* - Disable the DMA transfer in the peripheral register (if enabled)
|
|
* - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode)
|
|
* - Set handle State to READY
|
|
* @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed.
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_SMARTCARD_AbortTransmit(SMARTCARD_HandleTypeDef *hsmartcard)
|
|
{
|
|
/* Disable TXEIE and TCIE interrupts */
|
|
CLEAR_BIT(hsmartcard->Instance->CR1, (USART_CR1_TXEIE | USART_CR1_TCIE));
|
|
|
|
/* Check if a receive process is ongoing or not. If not disable ERR IT */
|
|
if (hsmartcard->RxState == HAL_SMARTCARD_STATE_READY)
|
|
{
|
|
/* Disable the SMARTCARD Error Interrupt: (Frame error) */
|
|
CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE);
|
|
}
|
|
|
|
/* Disable the SMARTCARD DMA Tx request if enabled */
|
|
if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAT))
|
|
{
|
|
CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAT);
|
|
|
|
/* Abort the SMARTCARD DMA Tx channel : use blocking DMA Abort API (no callback) */
|
|
if (hsmartcard->hdmatx != NULL)
|
|
{
|
|
/* Set the SMARTCARD DMA Abort callback to Null.
|
|
No call back execution at end of DMA abort procedure */
|
|
hsmartcard->hdmatx->XferAbortCallback = NULL;
|
|
|
|
if (HAL_DMA_Abort(hsmartcard->hdmatx) != HAL_OK)
|
|
{
|
|
if (HAL_DMA_GetError(hsmartcard->hdmatx) == HAL_DMA_ERROR_TIMEOUT)
|
|
{
|
|
/* Set error code to DMA */
|
|
hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_DMA;
|
|
|
|
return HAL_TIMEOUT;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Reset Tx transfer counter */
|
|
hsmartcard->TxXferCount = 0U;
|
|
|
|
/* Clear the Error flags in the ICR register */
|
|
__HAL_SMARTCARD_CLEAR_FLAG(hsmartcard, SMARTCARD_CLEAR_FEF);
|
|
|
|
/* Restore hsmartcard->gState to Ready */
|
|
hsmartcard->gState = HAL_SMARTCARD_STATE_READY;
|
|
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief Abort ongoing Receive transfer (blocking mode).
|
|
* @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
|
|
* the configuration information for the specified SMARTCARD module.
|
|
* @note This procedure could be used for aborting any ongoing Rx transfer started in Interrupt or DMA mode.
|
|
* This procedure performs following operations :
|
|
* - Disable SMARTCARD Interrupts (Rx)
|
|
* - Disable the DMA transfer in the peripheral register (if enabled)
|
|
* - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode)
|
|
* - Set handle State to READY
|
|
* @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed.
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_SMARTCARD_AbortReceive(SMARTCARD_HandleTypeDef *hsmartcard)
|
|
{
|
|
/* Disable RTOIE, EOBIE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */
|
|
CLEAR_BIT(hsmartcard->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE | USART_CR1_RTOIE | USART_CR1_EOBIE));
|
|
CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE);
|
|
|
|
/* Check if a Transmit process is ongoing or not. If not disable ERR IT */
|
|
if (hsmartcard->gState == HAL_SMARTCARD_STATE_READY)
|
|
{
|
|
/* Disable the SMARTCARD Error Interrupt: (Frame error) */
|
|
CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE);
|
|
}
|
|
|
|
/* Disable the SMARTCARD DMA Rx request if enabled */
|
|
if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAR))
|
|
{
|
|
CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAR);
|
|
|
|
/* Abort the SMARTCARD DMA Rx channel : use blocking DMA Abort API (no callback) */
|
|
if (hsmartcard->hdmarx != NULL)
|
|
{
|
|
/* Set the SMARTCARD DMA Abort callback to Null.
|
|
No call back execution at end of DMA abort procedure */
|
|
hsmartcard->hdmarx->XferAbortCallback = NULL;
|
|
|
|
if (HAL_DMA_Abort(hsmartcard->hdmarx) != HAL_OK)
|
|
{
|
|
if (HAL_DMA_GetError(hsmartcard->hdmarx) == HAL_DMA_ERROR_TIMEOUT)
|
|
{
|
|
/* Set error code to DMA */
|
|
hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_DMA;
|
|
|
|
return HAL_TIMEOUT;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Reset Rx transfer counter */
|
|
hsmartcard->RxXferCount = 0U;
|
|
|
|
/* Clear the Error flags in the ICR register */
|
|
__HAL_SMARTCARD_CLEAR_FLAG(hsmartcard,
|
|
SMARTCARD_CLEAR_OREF | SMARTCARD_CLEAR_NEF | SMARTCARD_CLEAR_PEF | SMARTCARD_CLEAR_FEF |
|
|
SMARTCARD_CLEAR_RTOF | SMARTCARD_CLEAR_EOBF);
|
|
|
|
/* Restore hsmartcard->RxState to Ready */
|
|
hsmartcard->RxState = HAL_SMARTCARD_STATE_READY;
|
|
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief Abort ongoing transfers (Interrupt mode).
|
|
* @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
|
|
* the configuration information for the specified SMARTCARD module.
|
|
* @note This procedure could be used for aborting any ongoing transfer started in Interrupt or DMA mode.
|
|
* This procedure performs following operations :
|
|
* - Disable SMARTCARD Interrupts (Tx and Rx)
|
|
* - Disable the DMA transfer in the peripheral register (if enabled)
|
|
* - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode)
|
|
* - Set handle State to READY
|
|
* - At abort completion, call user abort complete callback
|
|
* @note This procedure is executed in Interrupt mode, meaning that abort procedure could be
|
|
* considered as completed only when user abort complete callback is executed (not when exiting function).
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_SMARTCARD_Abort_IT(SMARTCARD_HandleTypeDef *hsmartcard)
|
|
{
|
|
uint32_t abortcplt = 1U;
|
|
|
|
/* Disable RTOIE, EOBIE, TXEIE, TCIE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */
|
|
CLEAR_BIT(hsmartcard->Instance->CR1,
|
|
(USART_CR1_RXNEIE | USART_CR1_PEIE | USART_CR1_TXEIE | USART_CR1_TCIE | USART_CR1_RTOIE |
|
|
USART_CR1_EOBIE));
|
|
CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE);
|
|
|
|
/* If DMA Tx and/or DMA Rx Handles are associated to SMARTCARD Handle,
|
|
DMA Abort complete callbacks should be initialised before any call
|
|
to DMA Abort functions */
|
|
/* DMA Tx Handle is valid */
|
|
if (hsmartcard->hdmatx != NULL)
|
|
{
|
|
/* Set DMA Abort Complete callback if SMARTCARD DMA Tx request if enabled.
|
|
Otherwise, set it to NULL */
|
|
if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAT))
|
|
{
|
|
hsmartcard->hdmatx->XferAbortCallback = SMARTCARD_DMATxAbortCallback;
|
|
}
|
|
else
|
|
{
|
|
hsmartcard->hdmatx->XferAbortCallback = NULL;
|
|
}
|
|
}
|
|
/* DMA Rx Handle is valid */
|
|
if (hsmartcard->hdmarx != NULL)
|
|
{
|
|
/* Set DMA Abort Complete callback if SMARTCARD DMA Rx request if enabled.
|
|
Otherwise, set it to NULL */
|
|
if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAR))
|
|
{
|
|
hsmartcard->hdmarx->XferAbortCallback = SMARTCARD_DMARxAbortCallback;
|
|
}
|
|
else
|
|
{
|
|
hsmartcard->hdmarx->XferAbortCallback = NULL;
|
|
}
|
|
}
|
|
|
|
/* Disable the SMARTCARD DMA Tx request if enabled */
|
|
if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAT))
|
|
{
|
|
/* Disable DMA Tx at UART level */
|
|
CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAT);
|
|
|
|
/* Abort the SMARTCARD DMA Tx channel : use non blocking DMA Abort API (callback) */
|
|
if (hsmartcard->hdmatx != NULL)
|
|
{
|
|
/* SMARTCARD Tx DMA Abort callback has already been initialised :
|
|
will lead to call HAL_SMARTCARD_AbortCpltCallback() at end of DMA abort procedure */
|
|
|
|
/* Abort DMA TX */
|
|
if (HAL_DMA_Abort_IT(hsmartcard->hdmatx) != HAL_OK)
|
|
{
|
|
hsmartcard->hdmatx->XferAbortCallback = NULL;
|
|
}
|
|
else
|
|
{
|
|
abortcplt = 0U;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Disable the SMARTCARD DMA Rx request if enabled */
|
|
if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAR))
|
|
{
|
|
CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAR);
|
|
|
|
/* Abort the SMARTCARD DMA Rx channel : use non blocking DMA Abort API (callback) */
|
|
if (hsmartcard->hdmarx != NULL)
|
|
{
|
|
/* SMARTCARD Rx DMA Abort callback has already been initialised :
|
|
will lead to call HAL_SMARTCARD_AbortCpltCallback() at end of DMA abort procedure */
|
|
|
|
/* Abort DMA RX */
|
|
if (HAL_DMA_Abort_IT(hsmartcard->hdmarx) != HAL_OK)
|
|
{
|
|
hsmartcard->hdmarx->XferAbortCallback = NULL;
|
|
abortcplt = 1U;
|
|
}
|
|
else
|
|
{
|
|
abortcplt = 0U;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* if no DMA abort complete callback execution is required => call user Abort Complete callback */
|
|
if (abortcplt == 1U)
|
|
{
|
|
/* Reset Tx and Rx transfer counters */
|
|
hsmartcard->TxXferCount = 0U;
|
|
hsmartcard->RxXferCount = 0U;
|
|
|
|
/* Clear ISR function pointers */
|
|
hsmartcard->RxISR = NULL;
|
|
hsmartcard->TxISR = NULL;
|
|
|
|
/* Reset errorCode */
|
|
hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
|
|
|
|
/* Clear the Error flags in the ICR register */
|
|
__HAL_SMARTCARD_CLEAR_FLAG(hsmartcard,
|
|
SMARTCARD_CLEAR_OREF | SMARTCARD_CLEAR_NEF | SMARTCARD_CLEAR_PEF |
|
|
SMARTCARD_CLEAR_FEF | SMARTCARD_CLEAR_RTOF | SMARTCARD_CLEAR_EOBF);
|
|
|
|
/* Restore hsmartcard->gState and hsmartcard->RxState to Ready */
|
|
hsmartcard->gState = HAL_SMARTCARD_STATE_READY;
|
|
hsmartcard->RxState = HAL_SMARTCARD_STATE_READY;
|
|
|
|
/* As no DMA to be aborted, call directly user Abort complete callback */
|
|
#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1)
|
|
/* Call registered Abort complete callback */
|
|
hsmartcard->AbortCpltCallback(hsmartcard);
|
|
#else
|
|
/* Call legacy weak Abort complete callback */
|
|
HAL_SMARTCARD_AbortCpltCallback(hsmartcard);
|
|
#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */
|
|
}
|
|
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief Abort ongoing Transmit transfer (Interrupt mode).
|
|
* @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
|
|
* the configuration information for the specified SMARTCARD module.
|
|
* @note This procedure could be used for aborting any ongoing Tx transfer started in Interrupt or DMA mode.
|
|
* This procedure performs following operations :
|
|
* - Disable SMARTCARD Interrupts (Tx)
|
|
* - Disable the DMA transfer in the peripheral register (if enabled)
|
|
* - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode)
|
|
* - Set handle State to READY
|
|
* - At abort completion, call user abort complete callback
|
|
* @note This procedure is executed in Interrupt mode, meaning that abort procedure could be
|
|
* considered as completed only when user abort complete callback is executed (not when exiting function).
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_SMARTCARD_AbortTransmit_IT(SMARTCARD_HandleTypeDef *hsmartcard)
|
|
{
|
|
/* Disable TXEIE and TCIE interrupts */
|
|
CLEAR_BIT(hsmartcard->Instance->CR1, (USART_CR1_TXEIE | USART_CR1_TCIE));
|
|
|
|
/* Check if a receive process is ongoing or not. If not disable ERR IT */
|
|
if (hsmartcard->RxState == HAL_SMARTCARD_STATE_READY)
|
|
{
|
|
/* Disable the SMARTCARD Error Interrupt: (Frame error) */
|
|
CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE);
|
|
}
|
|
|
|
/* Disable the SMARTCARD DMA Tx request if enabled */
|
|
if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAT))
|
|
{
|
|
CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAT);
|
|
|
|
/* Abort the SMARTCARD DMA Tx channel : use non blocking DMA Abort API (callback) */
|
|
if (hsmartcard->hdmatx != NULL)
|
|
{
|
|
/* Set the SMARTCARD DMA Abort callback :
|
|
will lead to call HAL_SMARTCARD_AbortCpltCallback() at end of DMA abort procedure */
|
|
hsmartcard->hdmatx->XferAbortCallback = SMARTCARD_DMATxOnlyAbortCallback;
|
|
|
|
/* Abort DMA TX */
|
|
if (HAL_DMA_Abort_IT(hsmartcard->hdmatx) != HAL_OK)
|
|
{
|
|
/* Call Directly hsmartcard->hdmatx->XferAbortCallback function in case of error */
|
|
hsmartcard->hdmatx->XferAbortCallback(hsmartcard->hdmatx);
|
|
}
|
|
}
|
|
else
|
|
{
|
|
/* Reset Tx transfer counter */
|
|
hsmartcard->TxXferCount = 0U;
|
|
|
|
/* Clear TxISR function pointers */
|
|
hsmartcard->TxISR = NULL;
|
|
|
|
/* Restore hsmartcard->gState to Ready */
|
|
hsmartcard->gState = HAL_SMARTCARD_STATE_READY;
|
|
|
|
/* As no DMA to be aborted, call directly user Abort complete callback */
|
|
#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1)
|
|
/* Call registered Abort Transmit Complete Callback */
|
|
hsmartcard->AbortTransmitCpltCallback(hsmartcard);
|
|
#else
|
|
/* Call legacy weak Abort Transmit Complete Callback */
|
|
HAL_SMARTCARD_AbortTransmitCpltCallback(hsmartcard);
|
|
#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */
|
|
}
|
|
}
|
|
else
|
|
{
|
|
/* Reset Tx transfer counter */
|
|
hsmartcard->TxXferCount = 0U;
|
|
|
|
/* Clear TxISR function pointers */
|
|
hsmartcard->TxISR = NULL;
|
|
|
|
/* Clear the Error flags in the ICR register */
|
|
__HAL_SMARTCARD_CLEAR_FLAG(hsmartcard, SMARTCARD_CLEAR_FEF);
|
|
|
|
/* Restore hsmartcard->gState to Ready */
|
|
hsmartcard->gState = HAL_SMARTCARD_STATE_READY;
|
|
|
|
/* As no DMA to be aborted, call directly user Abort complete callback */
|
|
#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1)
|
|
/* Call registered Abort Transmit Complete Callback */
|
|
hsmartcard->AbortTransmitCpltCallback(hsmartcard);
|
|
#else
|
|
/* Call legacy weak Abort Transmit Complete Callback */
|
|
HAL_SMARTCARD_AbortTransmitCpltCallback(hsmartcard);
|
|
#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */
|
|
}
|
|
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief Abort ongoing Receive transfer (Interrupt mode).
|
|
* @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
|
|
* the configuration information for the specified SMARTCARD module.
|
|
* @note This procedure could be used for aborting any ongoing Rx transfer started in Interrupt or DMA mode.
|
|
* This procedure performs following operations :
|
|
* - Disable SMARTCARD Interrupts (Rx)
|
|
* - Disable the DMA transfer in the peripheral register (if enabled)
|
|
* - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode)
|
|
* - Set handle State to READY
|
|
* - At abort completion, call user abort complete callback
|
|
* @note This procedure is executed in Interrupt mode, meaning that abort procedure could be
|
|
* considered as completed only when user abort complete callback is executed (not when exiting function).
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_SMARTCARD_AbortReceive_IT(SMARTCARD_HandleTypeDef *hsmartcard)
|
|
{
|
|
/* Disable RTOIE, EOBIE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */
|
|
CLEAR_BIT(hsmartcard->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE | USART_CR1_RTOIE | USART_CR1_EOBIE));
|
|
CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE);
|
|
|
|
/* Check if a Transmit process is ongoing or not. If not disable ERR IT */
|
|
if (hsmartcard->gState == HAL_SMARTCARD_STATE_READY)
|
|
{
|
|
/* Disable the SMARTCARD Error Interrupt: (Frame error) */
|
|
CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE);
|
|
}
|
|
|
|
/* Disable the SMARTCARD DMA Rx request if enabled */
|
|
if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAR))
|
|
{
|
|
CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAR);
|
|
|
|
/* Abort the SMARTCARD DMA Rx channel : use non blocking DMA Abort API (callback) */
|
|
if (hsmartcard->hdmarx != NULL)
|
|
{
|
|
/* Set the SMARTCARD DMA Abort callback :
|
|
will lead to call HAL_SMARTCARD_AbortCpltCallback() at end of DMA abort procedure */
|
|
hsmartcard->hdmarx->XferAbortCallback = SMARTCARD_DMARxOnlyAbortCallback;
|
|
|
|
/* Abort DMA RX */
|
|
if (HAL_DMA_Abort_IT(hsmartcard->hdmarx) != HAL_OK)
|
|
{
|
|
/* Call Directly hsmartcard->hdmarx->XferAbortCallback function in case of error */
|
|
hsmartcard->hdmarx->XferAbortCallback(hsmartcard->hdmarx);
|
|
}
|
|
}
|
|
else
|
|
{
|
|
/* Reset Rx transfer counter */
|
|
hsmartcard->RxXferCount = 0U;
|
|
|
|
/* Clear RxISR function pointer */
|
|
hsmartcard->RxISR = NULL;
|
|
|
|
/* Clear the Error flags in the ICR register */
|
|
__HAL_SMARTCARD_CLEAR_FLAG(hsmartcard,
|
|
SMARTCARD_CLEAR_OREF | SMARTCARD_CLEAR_NEF | SMARTCARD_CLEAR_PEF |
|
|
SMARTCARD_CLEAR_FEF | SMARTCARD_CLEAR_RTOF | SMARTCARD_CLEAR_EOBF);
|
|
|
|
/* Restore hsmartcard->RxState to Ready */
|
|
hsmartcard->RxState = HAL_SMARTCARD_STATE_READY;
|
|
|
|
/* As no DMA to be aborted, call directly user Abort complete callback */
|
|
#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1)
|
|
/* Call registered Abort Receive Complete Callback */
|
|
hsmartcard->AbortReceiveCpltCallback(hsmartcard);
|
|
#else
|
|
/* Call legacy weak Abort Receive Complete Callback */
|
|
HAL_SMARTCARD_AbortReceiveCpltCallback(hsmartcard);
|
|
#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */
|
|
}
|
|
}
|
|
else
|
|
{
|
|
/* Reset Rx transfer counter */
|
|
hsmartcard->RxXferCount = 0U;
|
|
|
|
/* Clear RxISR function pointer */
|
|
hsmartcard->RxISR = NULL;
|
|
|
|
/* Clear the Error flags in the ICR register */
|
|
__HAL_SMARTCARD_CLEAR_FLAG(hsmartcard,
|
|
SMARTCARD_CLEAR_OREF | SMARTCARD_CLEAR_NEF | SMARTCARD_CLEAR_PEF |
|
|
SMARTCARD_CLEAR_FEF | SMARTCARD_CLEAR_RTOF | SMARTCARD_CLEAR_EOBF);
|
|
|
|
/* Restore hsmartcard->RxState to Ready */
|
|
hsmartcard->RxState = HAL_SMARTCARD_STATE_READY;
|
|
|
|
/* As no DMA to be aborted, call directly user Abort complete callback */
|
|
#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1)
|
|
/* Call registered Abort Receive Complete Callback */
|
|
hsmartcard->AbortReceiveCpltCallback(hsmartcard);
|
|
#else
|
|
/* Call legacy weak Abort Receive Complete Callback */
|
|
HAL_SMARTCARD_AbortReceiveCpltCallback(hsmartcard);
|
|
#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */
|
|
}
|
|
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief Handle SMARTCARD interrupt requests.
|
|
* @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
|
|
* the configuration information for the specified SMARTCARD module.
|
|
* @retval None
|
|
*/
|
|
void HAL_SMARTCARD_IRQHandler(SMARTCARD_HandleTypeDef *hsmartcard)
|
|
{
|
|
uint32_t isrflags = READ_REG(hsmartcard->Instance->ISR);
|
|
uint32_t cr1its = READ_REG(hsmartcard->Instance->CR1);
|
|
uint32_t cr3its = READ_REG(hsmartcard->Instance->CR3);
|
|
uint32_t errorflags;
|
|
uint32_t errorcode;
|
|
|
|
/* If no error occurs */
|
|
errorflags = (isrflags & (uint32_t)(USART_ISR_PE | USART_ISR_FE | USART_ISR_ORE | USART_ISR_NE | USART_ISR_RTOF));
|
|
if (errorflags == 0U)
|
|
{
|
|
/* SMARTCARD in mode Receiver ---------------------------------------------------*/
|
|
if (((isrflags & USART_ISR_RXNE) != 0U)
|
|
&& ((cr1its & USART_CR1_RXNEIE) != 0U))
|
|
{
|
|
if (hsmartcard->RxISR != NULL)
|
|
{
|
|
hsmartcard->RxISR(hsmartcard);
|
|
}
|
|
return;
|
|
}
|
|
}
|
|
|
|
/* If some errors occur */
|
|
if ((errorflags != 0U)
|
|
&& (((cr3its & USART_CR3_EIE) != 0U)
|
|
|| ((cr1its & (USART_CR1_RXNEIE | USART_CR1_PEIE)) != 0U)))
|
|
{
|
|
/* SMARTCARD parity error interrupt occurred -------------------------------------*/
|
|
if (((isrflags & USART_ISR_PE) != 0U) && ((cr1its & USART_CR1_PEIE) != 0U))
|
|
{
|
|
__HAL_SMARTCARD_CLEAR_IT(hsmartcard, SMARTCARD_CLEAR_PEF);
|
|
|
|
hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_PE;
|
|
}
|
|
|
|
/* SMARTCARD frame error interrupt occurred --------------------------------------*/
|
|
if (((isrflags & USART_ISR_FE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U))
|
|
{
|
|
__HAL_SMARTCARD_CLEAR_IT(hsmartcard, SMARTCARD_CLEAR_FEF);
|
|
|
|
hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_FE;
|
|
}
|
|
|
|
/* SMARTCARD noise error interrupt occurred --------------------------------------*/
|
|
if (((isrflags & USART_ISR_NE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U))
|
|
{
|
|
__HAL_SMARTCARD_CLEAR_IT(hsmartcard, SMARTCARD_CLEAR_NEF);
|
|
|
|
hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_NE;
|
|
}
|
|
|
|
/* SMARTCARD Over-Run interrupt occurred -----------------------------------------*/
|
|
if (((isrflags & USART_ISR_ORE) != 0U)
|
|
&& (((cr1its & USART_CR1_RXNEIE) != 0U)
|
|
|| ((cr3its & USART_CR3_EIE) != 0U)))
|
|
{
|
|
__HAL_SMARTCARD_CLEAR_IT(hsmartcard, SMARTCARD_CLEAR_OREF);
|
|
|
|
hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_ORE;
|
|
}
|
|
|
|
/* SMARTCARD receiver timeout interrupt occurred -----------------------------------------*/
|
|
if (((isrflags & USART_ISR_RTOF) != 0U) && ((cr1its & USART_CR1_RTOIE) != 0U))
|
|
{
|
|
__HAL_SMARTCARD_CLEAR_IT(hsmartcard, SMARTCARD_CLEAR_RTOF);
|
|
|
|
hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_RTO;
|
|
}
|
|
|
|
/* Call SMARTCARD Error Call back function if need be --------------------------*/
|
|
if (hsmartcard->ErrorCode != HAL_SMARTCARD_ERROR_NONE)
|
|
{
|
|
/* SMARTCARD in mode Receiver ---------------------------------------------------*/
|
|
if (((isrflags & USART_ISR_RXNE) != 0U)
|
|
&& ((cr1its & USART_CR1_RXNEIE) != 0U))
|
|
{
|
|
if (hsmartcard->RxISR != NULL)
|
|
{
|
|
hsmartcard->RxISR(hsmartcard);
|
|
}
|
|
}
|
|
|
|
/* If Error is to be considered as blocking :
|
|
- Receiver Timeout error in Reception
|
|
- Overrun error in Reception
|
|
- any error occurs in DMA mode reception
|
|
*/
|
|
errorcode = hsmartcard->ErrorCode;
|
|
if ((HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAR))
|
|
|| ((errorcode & (HAL_SMARTCARD_ERROR_RTO | HAL_SMARTCARD_ERROR_ORE)) != 0U))
|
|
{
|
|
/* Blocking error : transfer is aborted
|
|
Set the SMARTCARD state ready to be able to start again the process,
|
|
Disable Rx Interrupts, and disable Rx DMA request, if ongoing */
|
|
SMARTCARD_EndRxTransfer(hsmartcard);
|
|
|
|
/* Disable the SMARTCARD DMA Rx request if enabled */
|
|
if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAR))
|
|
{
|
|
CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAR);
|
|
|
|
/* Abort the SMARTCARD DMA Rx channel */
|
|
if (hsmartcard->hdmarx != NULL)
|
|
{
|
|
/* Set the SMARTCARD DMA Abort callback :
|
|
will lead to call HAL_SMARTCARD_ErrorCallback() at end of DMA abort procedure */
|
|
hsmartcard->hdmarx->XferAbortCallback = SMARTCARD_DMAAbortOnError;
|
|
|
|
/* Abort DMA RX */
|
|
if (HAL_DMA_Abort_IT(hsmartcard->hdmarx) != HAL_OK)
|
|
{
|
|
/* Call Directly hsmartcard->hdmarx->XferAbortCallback function in case of error */
|
|
hsmartcard->hdmarx->XferAbortCallback(hsmartcard->hdmarx);
|
|
}
|
|
}
|
|
else
|
|
{
|
|
#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1)
|
|
/* Call registered user error callback */
|
|
hsmartcard->ErrorCallback(hsmartcard);
|
|
#else
|
|
/* Call legacy weak user error callback */
|
|
HAL_SMARTCARD_ErrorCallback(hsmartcard);
|
|
#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */
|
|
}
|
|
}
|
|
else
|
|
{
|
|
#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1)
|
|
/* Call registered user error callback */
|
|
hsmartcard->ErrorCallback(hsmartcard);
|
|
#else
|
|
/* Call legacy weak user error callback */
|
|
HAL_SMARTCARD_ErrorCallback(hsmartcard);
|
|
#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */
|
|
}
|
|
}
|
|
/* other error type to be considered as blocking :
|
|
- Frame error in Transmission
|
|
*/
|
|
else if ((hsmartcard->gState == HAL_SMARTCARD_STATE_BUSY_TX)
|
|
&& ((errorcode & HAL_SMARTCARD_ERROR_FE) != 0U))
|
|
{
|
|
/* Blocking error : transfer is aborted
|
|
Set the SMARTCARD state ready to be able to start again the process,
|
|
Disable Tx Interrupts, and disable Tx DMA request, if ongoing */
|
|
SMARTCARD_EndTxTransfer(hsmartcard);
|
|
|
|
/* Disable the SMARTCARD DMA Tx request if enabled */
|
|
if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAT))
|
|
{
|
|
CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAT);
|
|
|
|
/* Abort the SMARTCARD DMA Tx channel */
|
|
if (hsmartcard->hdmatx != NULL)
|
|
{
|
|
/* Set the SMARTCARD DMA Abort callback :
|
|
will lead to call HAL_SMARTCARD_ErrorCallback() at end of DMA abort procedure */
|
|
hsmartcard->hdmatx->XferAbortCallback = SMARTCARD_DMAAbortOnError;
|
|
|
|
/* Abort DMA TX */
|
|
if (HAL_DMA_Abort_IT(hsmartcard->hdmatx) != HAL_OK)
|
|
{
|
|
/* Call Directly hsmartcard->hdmatx->XferAbortCallback function in case of error */
|
|
hsmartcard->hdmatx->XferAbortCallback(hsmartcard->hdmatx);
|
|
}
|
|
}
|
|
else
|
|
{
|
|
#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1)
|
|
/* Call registered user error callback */
|
|
hsmartcard->ErrorCallback(hsmartcard);
|
|
#else
|
|
/* Call legacy weak user error callback */
|
|
HAL_SMARTCARD_ErrorCallback(hsmartcard);
|
|
#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */
|
|
}
|
|
}
|
|
else
|
|
{
|
|
#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1)
|
|
/* Call registered user error callback */
|
|
hsmartcard->ErrorCallback(hsmartcard);
|
|
#else
|
|
/* Call legacy weak user error callback */
|
|
HAL_SMARTCARD_ErrorCallback(hsmartcard);
|
|
#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */
|
|
}
|
|
}
|
|
else
|
|
{
|
|
/* Non Blocking error : transfer could go on.
|
|
Error is notified to user through user error callback */
|
|
#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1)
|
|
/* Call registered user error callback */
|
|
hsmartcard->ErrorCallback(hsmartcard);
|
|
#else
|
|
/* Call legacy weak user error callback */
|
|
HAL_SMARTCARD_ErrorCallback(hsmartcard);
|
|
#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */
|
|
hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
|
|
}
|
|
}
|
|
return;
|
|
|
|
} /* End if some error occurs */
|
|
|
|
/* SMARTCARD in mode Receiver, end of block interruption ------------------------*/
|
|
if (((isrflags & USART_ISR_EOBF) != 0U) && ((cr1its & USART_CR1_EOBIE) != 0U))
|
|
{
|
|
hsmartcard->RxState = HAL_SMARTCARD_STATE_READY;
|
|
__HAL_UNLOCK(hsmartcard);
|
|
#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1)
|
|
/* Call registered Rx complete callback */
|
|
hsmartcard->RxCpltCallback(hsmartcard);
|
|
#else
|
|
/* Call legacy weak Rx complete callback */
|
|
HAL_SMARTCARD_RxCpltCallback(hsmartcard);
|
|
#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */
|
|
/* Clear EOBF interrupt after HAL_SMARTCARD_RxCpltCallback() call for the End of Block information
|
|
to be available during HAL_SMARTCARD_RxCpltCallback() processing */
|
|
__HAL_SMARTCARD_CLEAR_IT(hsmartcard, SMARTCARD_CLEAR_EOBF);
|
|
return;
|
|
}
|
|
|
|
/* SMARTCARD in mode Transmitter ------------------------------------------------*/
|
|
if (((isrflags & USART_ISR_TXE) != 0U)
|
|
&& ((cr1its & USART_CR1_TXEIE) != 0U))
|
|
{
|
|
if (hsmartcard->TxISR != NULL)
|
|
{
|
|
hsmartcard->TxISR(hsmartcard);
|
|
}
|
|
return;
|
|
}
|
|
|
|
/* SMARTCARD in mode Transmitter (transmission end) ------------------------*/
|
|
if (__HAL_SMARTCARD_GET_IT(hsmartcard, hsmartcard->AdvancedInit.TxCompletionIndication) != RESET)
|
|
{
|
|
if (__HAL_SMARTCARD_GET_IT_SOURCE(hsmartcard, hsmartcard->AdvancedInit.TxCompletionIndication) != RESET)
|
|
{
|
|
SMARTCARD_EndTransmit_IT(hsmartcard);
|
|
return;
|
|
}
|
|
}
|
|
|
|
}
|
|
|
|
/**
|
|
* @brief Tx Transfer completed callback.
|
|
* @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
|
|
* the configuration information for the specified SMARTCARD module.
|
|
* @retval None
|
|
*/
|
|
__weak void HAL_SMARTCARD_TxCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard)
|
|
{
|
|
/* Prevent unused argument(s) compilation warning */
|
|
UNUSED(hsmartcard);
|
|
|
|
/* NOTE : This function should not be modified, when the callback is needed,
|
|
the HAL_SMARTCARD_TxCpltCallback can be implemented in the user file.
|
|
*/
|
|
}
|
|
|
|
/**
|
|
* @brief Rx Transfer completed callback.
|
|
* @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
|
|
* the configuration information for the specified SMARTCARD module.
|
|
* @retval None
|
|
*/
|
|
__weak void HAL_SMARTCARD_RxCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard)
|
|
{
|
|
/* Prevent unused argument(s) compilation warning */
|
|
UNUSED(hsmartcard);
|
|
|
|
/* NOTE : This function should not be modified, when the callback is needed,
|
|
the HAL_SMARTCARD_RxCpltCallback can be implemented in the user file.
|
|
*/
|
|
}
|
|
|
|
/**
|
|
* @brief SMARTCARD error callback.
|
|
* @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
|
|
* the configuration information for the specified SMARTCARD module.
|
|
* @retval None
|
|
*/
|
|
__weak void HAL_SMARTCARD_ErrorCallback(SMARTCARD_HandleTypeDef *hsmartcard)
|
|
{
|
|
/* Prevent unused argument(s) compilation warning */
|
|
UNUSED(hsmartcard);
|
|
|
|
/* NOTE : This function should not be modified, when the callback is needed,
|
|
the HAL_SMARTCARD_ErrorCallback can be implemented in the user file.
|
|
*/
|
|
}
|
|
|
|
/**
|
|
* @brief SMARTCARD Abort Complete callback.
|
|
* @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
|
|
* the configuration information for the specified SMARTCARD module.
|
|
* @retval None
|
|
*/
|
|
__weak void HAL_SMARTCARD_AbortCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard)
|
|
{
|
|
/* Prevent unused argument(s) compilation warning */
|
|
UNUSED(hsmartcard);
|
|
|
|
/* NOTE : This function should not be modified, when the callback is needed,
|
|
the HAL_SMARTCARD_AbortCpltCallback can be implemented in the user file.
|
|
*/
|
|
}
|
|
|
|
/**
|
|
* @brief SMARTCARD Abort Complete callback.
|
|
* @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
|
|
* the configuration information for the specified SMARTCARD module.
|
|
* @retval None
|
|
*/
|
|
__weak void HAL_SMARTCARD_AbortTransmitCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard)
|
|
{
|
|
/* Prevent unused argument(s) compilation warning */
|
|
UNUSED(hsmartcard);
|
|
|
|
/* NOTE : This function should not be modified, when the callback is needed,
|
|
the HAL_SMARTCARD_AbortTransmitCpltCallback can be implemented in the user file.
|
|
*/
|
|
}
|
|
|
|
/**
|
|
* @brief SMARTCARD Abort Receive Complete callback.
|
|
* @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
|
|
* the configuration information for the specified SMARTCARD module.
|
|
* @retval None
|
|
*/
|
|
__weak void HAL_SMARTCARD_AbortReceiveCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard)
|
|
{
|
|
/* Prevent unused argument(s) compilation warning */
|
|
UNUSED(hsmartcard);
|
|
|
|
/* NOTE : This function should not be modified, when the callback is needed,
|
|
the HAL_SMARTCARD_AbortReceiveCpltCallback can be implemented in the user file.
|
|
*/
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup SMARTCARD_Exported_Functions_Group4 Peripheral State and Errors functions
|
|
* @brief SMARTCARD State and Errors functions
|
|
*
|
|
@verbatim
|
|
==============================================================================
|
|
##### Peripheral State and Errors functions #####
|
|
==============================================================================
|
|
[..]
|
|
This subsection provides a set of functions allowing to return the State of SmartCard
|
|
handle and also return Peripheral Errors occurred during communication process
|
|
(+) HAL_SMARTCARD_GetState() API can be helpful to check in run-time the state
|
|
of the SMARTCARD peripheral.
|
|
(+) HAL_SMARTCARD_GetError() checks in run-time errors that could occur during
|
|
communication.
|
|
|
|
@endverbatim
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Return the SMARTCARD handle state.
|
|
* @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
|
|
* the configuration information for the specified SMARTCARD module.
|
|
* @retval SMARTCARD handle state
|
|
*/
|
|
HAL_SMARTCARD_StateTypeDef HAL_SMARTCARD_GetState(SMARTCARD_HandleTypeDef *hsmartcard)
|
|
{
|
|
/* Return SMARTCARD handle state */
|
|
uint32_t temp1;
|
|
uint32_t temp2;
|
|
temp1 = (uint32_t)hsmartcard->gState;
|
|
temp2 = (uint32_t)hsmartcard->RxState;
|
|
|
|
return (HAL_SMARTCARD_StateTypeDef)(temp1 | temp2);
|
|
}
|
|
|
|
/**
|
|
* @brief Return the SMARTCARD handle error code.
|
|
* @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
|
|
* the configuration information for the specified SMARTCARD module.
|
|
* @retval SMARTCARD handle Error Code
|
|
*/
|
|
uint32_t HAL_SMARTCARD_GetError(SMARTCARD_HandleTypeDef *hsmartcard)
|
|
{
|
|
return hsmartcard->ErrorCode;
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup SMARTCARD_Private_Functions SMARTCARD Private Functions
|
|
* @{
|
|
*/
|
|
|
|
#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1)
|
|
/**
|
|
* @brief Initialize the callbacks to their default values.
|
|
* @param hsmartcard SMARTCARD handle.
|
|
* @retval none
|
|
*/
|
|
void SMARTCARD_InitCallbacksToDefault(SMARTCARD_HandleTypeDef *hsmartcard)
|
|
{
|
|
/* Init the SMARTCARD Callback settings */
|
|
hsmartcard->TxCpltCallback = HAL_SMARTCARD_TxCpltCallback; /* Legacy weak TxCpltCallback */
|
|
hsmartcard->RxCpltCallback = HAL_SMARTCARD_RxCpltCallback; /* Legacy weak RxCpltCallback */
|
|
hsmartcard->ErrorCallback = HAL_SMARTCARD_ErrorCallback; /* Legacy weak ErrorCallback */
|
|
hsmartcard->AbortCpltCallback = HAL_SMARTCARD_AbortCpltCallback; /* Legacy weak AbortCpltCallback */
|
|
hsmartcard->AbortTransmitCpltCallback = HAL_SMARTCARD_AbortTransmitCpltCallback; /* Legacy weak
|
|
AbortTransmitCpltCallback */
|
|
hsmartcard->AbortReceiveCpltCallback = HAL_SMARTCARD_AbortReceiveCpltCallback; /* Legacy weak
|
|
AbortReceiveCpltCallback */
|
|
|
|
}
|
|
#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACKS */
|
|
|
|
/**
|
|
* @brief Configure the SMARTCARD associated USART peripheral.
|
|
* @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
|
|
* the configuration information for the specified SMARTCARD module.
|
|
* @retval HAL status
|
|
*/
|
|
static HAL_StatusTypeDef SMARTCARD_SetConfig(SMARTCARD_HandleTypeDef *hsmartcard)
|
|
{
|
|
uint32_t tmpreg;
|
|
SMARTCARD_ClockSourceTypeDef clocksource;
|
|
HAL_StatusTypeDef ret = HAL_OK;
|
|
uint32_t pclk;
|
|
|
|
/* Check the parameters */
|
|
assert_param(IS_SMARTCARD_INSTANCE(hsmartcard->Instance));
|
|
assert_param(IS_SMARTCARD_BAUDRATE(hsmartcard->Init.BaudRate));
|
|
assert_param(IS_SMARTCARD_WORD_LENGTH(hsmartcard->Init.WordLength));
|
|
assert_param(IS_SMARTCARD_STOPBITS(hsmartcard->Init.StopBits));
|
|
assert_param(IS_SMARTCARD_PARITY(hsmartcard->Init.Parity));
|
|
assert_param(IS_SMARTCARD_MODE(hsmartcard->Init.Mode));
|
|
assert_param(IS_SMARTCARD_POLARITY(hsmartcard->Init.CLKPolarity));
|
|
assert_param(IS_SMARTCARD_PHASE(hsmartcard->Init.CLKPhase));
|
|
assert_param(IS_SMARTCARD_LASTBIT(hsmartcard->Init.CLKLastBit));
|
|
assert_param(IS_SMARTCARD_ONE_BIT_SAMPLE(hsmartcard->Init.OneBitSampling));
|
|
assert_param(IS_SMARTCARD_NACK(hsmartcard->Init.NACKEnable));
|
|
assert_param(IS_SMARTCARD_TIMEOUT(hsmartcard->Init.TimeOutEnable));
|
|
assert_param(IS_SMARTCARD_AUTORETRY_COUNT(hsmartcard->Init.AutoRetryCount));
|
|
|
|
/*-------------------------- USART CR1 Configuration -----------------------*/
|
|
/* In SmartCard mode, M and PCE are forced to 1 (8 bits + parity).
|
|
* Oversampling is forced to 16 (OVER8 = 0).
|
|
* Configure the Parity and Mode:
|
|
* set PS bit according to hsmartcard->Init.Parity value
|
|
* set TE and RE bits according to hsmartcard->Init.Mode value */
|
|
tmpreg = (((uint32_t)hsmartcard->Init.Parity) | ((uint32_t)hsmartcard->Init.Mode) |
|
|
((uint32_t)hsmartcard->Init.WordLength));
|
|
MODIFY_REG(hsmartcard->Instance->CR1, USART_CR1_FIELDS, tmpreg);
|
|
|
|
/*-------------------------- USART CR2 Configuration -----------------------*/
|
|
tmpreg = hsmartcard->Init.StopBits;
|
|
/* Synchronous mode is activated by default */
|
|
tmpreg |= (uint32_t) USART_CR2_CLKEN | hsmartcard->Init.CLKPolarity;
|
|
tmpreg |= (uint32_t) hsmartcard->Init.CLKPhase | hsmartcard->Init.CLKLastBit;
|
|
tmpreg |= (uint32_t) hsmartcard->Init.TimeOutEnable;
|
|
MODIFY_REG(hsmartcard->Instance->CR2, USART_CR2_FIELDS, tmpreg);
|
|
|
|
/*-------------------------- USART CR3 Configuration -----------------------*/
|
|
/* Configure
|
|
* - one-bit sampling method versus three samples' majority rule
|
|
* according to hsmartcard->Init.OneBitSampling
|
|
* - NACK transmission in case of parity error according
|
|
* to hsmartcard->Init.NACKEnable
|
|
* - autoretry counter according to hsmartcard->Init.AutoRetryCount */
|
|
|
|
tmpreg = (uint32_t) hsmartcard->Init.OneBitSampling | hsmartcard->Init.NACKEnable;
|
|
tmpreg |= ((uint32_t)hsmartcard->Init.AutoRetryCount << USART_CR3_SCARCNT_Pos);
|
|
MODIFY_REG(hsmartcard->Instance->CR3, USART_CR3_FIELDS, tmpreg);
|
|
|
|
|
|
/*-------------------------- USART GTPR Configuration ----------------------*/
|
|
tmpreg = (hsmartcard->Init.Prescaler | ((uint32_t)hsmartcard->Init.GuardTime << USART_GTPR_GT_Pos));
|
|
MODIFY_REG(hsmartcard->Instance->GTPR, (uint16_t)(USART_GTPR_GT | USART_GTPR_PSC), (uint16_t)tmpreg);
|
|
|
|
/*-------------------------- USART RTOR Configuration ----------------------*/
|
|
tmpreg = ((uint32_t)hsmartcard->Init.BlockLength << USART_RTOR_BLEN_Pos);
|
|
if (hsmartcard->Init.TimeOutEnable == SMARTCARD_TIMEOUT_ENABLE)
|
|
{
|
|
assert_param(IS_SMARTCARD_TIMEOUT_VALUE(hsmartcard->Init.TimeOutValue));
|
|
tmpreg |= (uint32_t) hsmartcard->Init.TimeOutValue;
|
|
}
|
|
MODIFY_REG(hsmartcard->Instance->RTOR, (USART_RTOR_RTO | USART_RTOR_BLEN), tmpreg);
|
|
|
|
/*-------------------------- USART BRR Configuration -----------------------*/
|
|
SMARTCARD_GETCLOCKSOURCE(hsmartcard, clocksource);
|
|
tmpreg = 0U;
|
|
switch (clocksource)
|
|
{
|
|
case SMARTCARD_CLOCKSOURCE_PCLK1:
|
|
pclk = HAL_RCC_GetPCLK1Freq();
|
|
tmpreg = (uint32_t)((pclk + (hsmartcard->Init.BaudRate / 2U)) / hsmartcard->Init.BaudRate);
|
|
break;
|
|
case SMARTCARD_CLOCKSOURCE_PCLK2:
|
|
pclk = HAL_RCC_GetPCLK2Freq();
|
|
tmpreg = (uint32_t)((pclk + (hsmartcard->Init.BaudRate / 2U)) / hsmartcard->Init.BaudRate);
|
|
break;
|
|
case SMARTCARD_CLOCKSOURCE_HSI:
|
|
tmpreg = (uint32_t)((HSI_VALUE + (hsmartcard->Init.BaudRate / 2U)) / hsmartcard->Init.BaudRate);
|
|
break;
|
|
case SMARTCARD_CLOCKSOURCE_SYSCLK:
|
|
pclk = HAL_RCC_GetSysClockFreq();
|
|
tmpreg = (uint32_t)((pclk + (hsmartcard->Init.BaudRate / 2U)) / hsmartcard->Init.BaudRate);
|
|
break;
|
|
case SMARTCARD_CLOCKSOURCE_LSE:
|
|
tmpreg = (uint32_t)((LSE_VALUE + (hsmartcard->Init.BaudRate / 2U)) / hsmartcard->Init.BaudRate);
|
|
break;
|
|
default:
|
|
ret = HAL_ERROR;
|
|
break;
|
|
}
|
|
|
|
/* USARTDIV must be greater than or equal to 0d16 */
|
|
if ((tmpreg >= USART_BRR_MIN) && (tmpreg <= USART_BRR_MAX))
|
|
{
|
|
hsmartcard->Instance->BRR = (uint16_t)tmpreg;
|
|
}
|
|
else
|
|
{
|
|
ret = HAL_ERROR;
|
|
}
|
|
|
|
|
|
/* Clear ISR function pointers */
|
|
hsmartcard->RxISR = NULL;
|
|
hsmartcard->TxISR = NULL;
|
|
|
|
return ret;
|
|
}
|
|
|
|
|
|
/**
|
|
* @brief Configure the SMARTCARD associated USART peripheral advanced features.
|
|
* @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
|
|
* the configuration information for the specified SMARTCARD module.
|
|
* @retval None
|
|
*/
|
|
static void SMARTCARD_AdvFeatureConfig(SMARTCARD_HandleTypeDef *hsmartcard)
|
|
{
|
|
/* Check whether the set of advanced features to configure is properly set */
|
|
assert_param(IS_SMARTCARD_ADVFEATURE_INIT(hsmartcard->AdvancedInit.AdvFeatureInit));
|
|
|
|
/* if required, configure TX pin active level inversion */
|
|
if (HAL_IS_BIT_SET(hsmartcard->AdvancedInit.AdvFeatureInit, SMARTCARD_ADVFEATURE_TXINVERT_INIT))
|
|
{
|
|
assert_param(IS_SMARTCARD_ADVFEATURE_TXINV(hsmartcard->AdvancedInit.TxPinLevelInvert));
|
|
MODIFY_REG(hsmartcard->Instance->CR2, USART_CR2_TXINV, hsmartcard->AdvancedInit.TxPinLevelInvert);
|
|
}
|
|
|
|
/* if required, configure RX pin active level inversion */
|
|
if (HAL_IS_BIT_SET(hsmartcard->AdvancedInit.AdvFeatureInit, SMARTCARD_ADVFEATURE_RXINVERT_INIT))
|
|
{
|
|
assert_param(IS_SMARTCARD_ADVFEATURE_RXINV(hsmartcard->AdvancedInit.RxPinLevelInvert));
|
|
MODIFY_REG(hsmartcard->Instance->CR2, USART_CR2_RXINV, hsmartcard->AdvancedInit.RxPinLevelInvert);
|
|
}
|
|
|
|
/* if required, configure data inversion */
|
|
if (HAL_IS_BIT_SET(hsmartcard->AdvancedInit.AdvFeatureInit, SMARTCARD_ADVFEATURE_DATAINVERT_INIT))
|
|
{
|
|
assert_param(IS_SMARTCARD_ADVFEATURE_DATAINV(hsmartcard->AdvancedInit.DataInvert));
|
|
MODIFY_REG(hsmartcard->Instance->CR2, USART_CR2_DATAINV, hsmartcard->AdvancedInit.DataInvert);
|
|
}
|
|
|
|
/* if required, configure RX/TX pins swap */
|
|
if (HAL_IS_BIT_SET(hsmartcard->AdvancedInit.AdvFeatureInit, SMARTCARD_ADVFEATURE_SWAP_INIT))
|
|
{
|
|
assert_param(IS_SMARTCARD_ADVFEATURE_SWAP(hsmartcard->AdvancedInit.Swap));
|
|
MODIFY_REG(hsmartcard->Instance->CR2, USART_CR2_SWAP, hsmartcard->AdvancedInit.Swap);
|
|
}
|
|
|
|
/* if required, configure RX overrun detection disabling */
|
|
if (HAL_IS_BIT_SET(hsmartcard->AdvancedInit.AdvFeatureInit, SMARTCARD_ADVFEATURE_RXOVERRUNDISABLE_INIT))
|
|
{
|
|
assert_param(IS_SMARTCARD_OVERRUN(hsmartcard->AdvancedInit.OverrunDisable));
|
|
MODIFY_REG(hsmartcard->Instance->CR3, USART_CR3_OVRDIS, hsmartcard->AdvancedInit.OverrunDisable);
|
|
}
|
|
|
|
/* if required, configure DMA disabling on reception error */
|
|
if (HAL_IS_BIT_SET(hsmartcard->AdvancedInit.AdvFeatureInit, SMARTCARD_ADVFEATURE_DMADISABLEONERROR_INIT))
|
|
{
|
|
assert_param(IS_SMARTCARD_ADVFEATURE_DMAONRXERROR(hsmartcard->AdvancedInit.DMADisableonRxError));
|
|
MODIFY_REG(hsmartcard->Instance->CR3, USART_CR3_DDRE, hsmartcard->AdvancedInit.DMADisableonRxError);
|
|
}
|
|
|
|
/* if required, configure MSB first on communication line */
|
|
if (HAL_IS_BIT_SET(hsmartcard->AdvancedInit.AdvFeatureInit, SMARTCARD_ADVFEATURE_MSBFIRST_INIT))
|
|
{
|
|
assert_param(IS_SMARTCARD_ADVFEATURE_MSBFIRST(hsmartcard->AdvancedInit.MSBFirst));
|
|
MODIFY_REG(hsmartcard->Instance->CR2, USART_CR2_MSBFIRST, hsmartcard->AdvancedInit.MSBFirst);
|
|
}
|
|
|
|
}
|
|
|
|
/**
|
|
* @brief Check the SMARTCARD Idle State.
|
|
* @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
|
|
* the configuration information for the specified SMARTCARD module.
|
|
* @retval HAL status
|
|
*/
|
|
static HAL_StatusTypeDef SMARTCARD_CheckIdleState(SMARTCARD_HandleTypeDef *hsmartcard)
|
|
{
|
|
uint32_t tickstart;
|
|
|
|
/* Initialize the SMARTCARD ErrorCode */
|
|
hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
|
|
|
|
/* Init tickstart for timeout management */
|
|
tickstart = HAL_GetTick();
|
|
|
|
/* Check if the Transmitter is enabled */
|
|
if ((hsmartcard->Instance->CR1 & USART_CR1_TE) == USART_CR1_TE)
|
|
{
|
|
/* Wait until TEACK flag is set */
|
|
if (SMARTCARD_WaitOnFlagUntilTimeout(hsmartcard, USART_ISR_TEACK, RESET, tickstart,
|
|
SMARTCARD_TEACK_REACK_TIMEOUT) != HAL_OK)
|
|
{
|
|
/* Timeout occurred */
|
|
return HAL_TIMEOUT;
|
|
}
|
|
}
|
|
|
|
/* Initialize the SMARTCARD states */
|
|
hsmartcard->gState = HAL_SMARTCARD_STATE_READY;
|
|
hsmartcard->RxState = HAL_SMARTCARD_STATE_READY;
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hsmartcard);
|
|
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief Handle SMARTCARD Communication Timeout. It waits
|
|
* until a flag is no longer in the specified status.
|
|
* @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
|
|
* the configuration information for the specified SMARTCARD module.
|
|
* @param Flag Specifies the SMARTCARD flag to check.
|
|
* @param Status The actual Flag status (SET or RESET).
|
|
* @param Tickstart Tick start value
|
|
* @param Timeout Timeout duration.
|
|
* @retval HAL status
|
|
*/
|
|
static HAL_StatusTypeDef SMARTCARD_WaitOnFlagUntilTimeout(SMARTCARD_HandleTypeDef *hsmartcard, uint32_t Flag,
|
|
FlagStatus Status, uint32_t Tickstart, uint32_t Timeout)
|
|
{
|
|
/* Wait until flag is set */
|
|
while ((__HAL_SMARTCARD_GET_FLAG(hsmartcard, Flag) ? SET : RESET) == Status)
|
|
{
|
|
/* Check for the Timeout */
|
|
if (Timeout != HAL_MAX_DELAY)
|
|
{
|
|
if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U))
|
|
{
|
|
/* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error)
|
|
interrupts for the interrupt process */
|
|
CLEAR_BIT(hsmartcard->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE | USART_CR1_TXEIE));
|
|
CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE);
|
|
|
|
hsmartcard->gState = HAL_SMARTCARD_STATE_READY;
|
|
hsmartcard->RxState = HAL_SMARTCARD_STATE_READY;
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hsmartcard);
|
|
return HAL_TIMEOUT;
|
|
}
|
|
}
|
|
}
|
|
return HAL_OK;
|
|
}
|
|
|
|
|
|
/**
|
|
* @brief End ongoing Tx transfer on SMARTCARD peripheral (following error detection or Transmit completion).
|
|
* @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
|
|
* the configuration information for the specified SMARTCARD module.
|
|
* @retval None
|
|
*/
|
|
static void SMARTCARD_EndTxTransfer(SMARTCARD_HandleTypeDef *hsmartcard)
|
|
{
|
|
/* Disable TXEIE, TCIE and ERR (Frame error, noise error, overrun error) interrupts */
|
|
CLEAR_BIT(hsmartcard->Instance->CR1, (USART_CR1_TXEIE | USART_CR1_TCIE));
|
|
CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE);
|
|
|
|
/* At end of Tx process, restore hsmartcard->gState to Ready */
|
|
hsmartcard->gState = HAL_SMARTCARD_STATE_READY;
|
|
}
|
|
|
|
|
|
/**
|
|
* @brief End ongoing Rx transfer on UART peripheral (following error detection or Reception completion).
|
|
* @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
|
|
* the configuration information for the specified SMARTCARD module.
|
|
* @retval None
|
|
*/
|
|
static void SMARTCARD_EndRxTransfer(SMARTCARD_HandleTypeDef *hsmartcard)
|
|
{
|
|
/* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */
|
|
CLEAR_BIT(hsmartcard->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE));
|
|
CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE);
|
|
|
|
/* At end of Rx process, restore hsmartcard->RxState to Ready */
|
|
hsmartcard->RxState = HAL_SMARTCARD_STATE_READY;
|
|
}
|
|
|
|
|
|
/**
|
|
* @brief DMA SMARTCARD transmit process complete callback.
|
|
* @param hdma Pointer to a DMA_HandleTypeDef structure that contains
|
|
* the configuration information for the specified DMA module.
|
|
* @retval None
|
|
*/
|
|
static void SMARTCARD_DMATransmitCplt(DMA_HandleTypeDef *hdma)
|
|
{
|
|
SMARTCARD_HandleTypeDef *hsmartcard = (SMARTCARD_HandleTypeDef *)(hdma->Parent);
|
|
hsmartcard->TxXferCount = 0U;
|
|
|
|
/* Disable the DMA transfer for transmit request by resetting the DMAT bit
|
|
in the SMARTCARD associated USART CR3 register */
|
|
CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAT);
|
|
|
|
/* Enable the SMARTCARD Transmit Complete Interrupt */
|
|
__HAL_SMARTCARD_ENABLE_IT(hsmartcard, hsmartcard->AdvancedInit.TxCompletionIndication);
|
|
}
|
|
|
|
/**
|
|
* @brief DMA SMARTCARD receive process complete callback.
|
|
* @param hdma Pointer to a DMA_HandleTypeDef structure that contains
|
|
* the configuration information for the specified DMA module.
|
|
* @retval None
|
|
*/
|
|
static void SMARTCARD_DMAReceiveCplt(DMA_HandleTypeDef *hdma)
|
|
{
|
|
SMARTCARD_HandleTypeDef *hsmartcard = (SMARTCARD_HandleTypeDef *)(hdma->Parent);
|
|
hsmartcard->RxXferCount = 0U;
|
|
|
|
/* Disable PE and ERR (Frame error, noise error, overrun error) interrupts */
|
|
CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_PEIE);
|
|
CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE);
|
|
|
|
/* Disable the DMA transfer for the receiver request by resetting the DMAR bit
|
|
in the SMARTCARD associated USART CR3 register */
|
|
CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAR);
|
|
|
|
/* At end of Rx process, restore hsmartcard->RxState to Ready */
|
|
hsmartcard->RxState = HAL_SMARTCARD_STATE_READY;
|
|
|
|
#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1)
|
|
/* Call registered Rx complete callback */
|
|
hsmartcard->RxCpltCallback(hsmartcard);
|
|
#else
|
|
/* Call legacy weak Rx complete callback */
|
|
HAL_SMARTCARD_RxCpltCallback(hsmartcard);
|
|
#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */
|
|
}
|
|
|
|
/**
|
|
* @brief DMA SMARTCARD communication error callback.
|
|
* @param hdma Pointer to a DMA_HandleTypeDef structure that contains
|
|
* the configuration information for the specified DMA module.
|
|
* @retval None
|
|
*/
|
|
static void SMARTCARD_DMAError(DMA_HandleTypeDef *hdma)
|
|
{
|
|
SMARTCARD_HandleTypeDef *hsmartcard = (SMARTCARD_HandleTypeDef *)(hdma->Parent);
|
|
|
|
/* Stop SMARTCARD DMA Tx request if ongoing */
|
|
if (hsmartcard->gState == HAL_SMARTCARD_STATE_BUSY_TX)
|
|
{
|
|
if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAT))
|
|
{
|
|
hsmartcard->TxXferCount = 0U;
|
|
SMARTCARD_EndTxTransfer(hsmartcard);
|
|
}
|
|
}
|
|
|
|
/* Stop SMARTCARD DMA Rx request if ongoing */
|
|
if (hsmartcard->RxState == HAL_SMARTCARD_STATE_BUSY_RX)
|
|
{
|
|
if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAR))
|
|
{
|
|
hsmartcard->RxXferCount = 0U;
|
|
SMARTCARD_EndRxTransfer(hsmartcard);
|
|
}
|
|
}
|
|
|
|
hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_DMA;
|
|
#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1)
|
|
/* Call registered user error callback */
|
|
hsmartcard->ErrorCallback(hsmartcard);
|
|
#else
|
|
/* Call legacy weak user error callback */
|
|
HAL_SMARTCARD_ErrorCallback(hsmartcard);
|
|
#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */
|
|
}
|
|
|
|
/**
|
|
* @brief DMA SMARTCARD communication abort callback, when initiated by HAL services on Error
|
|
* (To be called at end of DMA Abort procedure following error occurrence).
|
|
* @param hdma DMA handle.
|
|
* @retval None
|
|
*/
|
|
static void SMARTCARD_DMAAbortOnError(DMA_HandleTypeDef *hdma)
|
|
{
|
|
SMARTCARD_HandleTypeDef *hsmartcard = (SMARTCARD_HandleTypeDef *)(hdma->Parent);
|
|
hsmartcard->RxXferCount = 0U;
|
|
hsmartcard->TxXferCount = 0U;
|
|
|
|
#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1)
|
|
/* Call registered user error callback */
|
|
hsmartcard->ErrorCallback(hsmartcard);
|
|
#else
|
|
/* Call legacy weak user error callback */
|
|
HAL_SMARTCARD_ErrorCallback(hsmartcard);
|
|
#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */
|
|
}
|
|
|
|
/**
|
|
* @brief DMA SMARTCARD Tx communication abort callback, when initiated by user
|
|
* (To be called at end of DMA Tx Abort procedure following user abort request).
|
|
* @note When this callback is executed, User Abort complete call back is called only if no
|
|
* Abort still ongoing for Rx DMA Handle.
|
|
* @param hdma DMA handle.
|
|
* @retval None
|
|
*/
|
|
static void SMARTCARD_DMATxAbortCallback(DMA_HandleTypeDef *hdma)
|
|
{
|
|
SMARTCARD_HandleTypeDef *hsmartcard = (SMARTCARD_HandleTypeDef *)(hdma->Parent);
|
|
|
|
hsmartcard->hdmatx->XferAbortCallback = NULL;
|
|
|
|
/* Check if an Abort process is still ongoing */
|
|
if (hsmartcard->hdmarx != NULL)
|
|
{
|
|
if (hsmartcard->hdmarx->XferAbortCallback != NULL)
|
|
{
|
|
return;
|
|
}
|
|
}
|
|
|
|
/* No Abort process still ongoing : All DMA channels are aborted, call user Abort Complete callback */
|
|
hsmartcard->TxXferCount = 0U;
|
|
hsmartcard->RxXferCount = 0U;
|
|
|
|
/* Reset errorCode */
|
|
hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
|
|
|
|
/* Clear the Error flags in the ICR register */
|
|
__HAL_SMARTCARD_CLEAR_FLAG(hsmartcard,
|
|
SMARTCARD_CLEAR_OREF | SMARTCARD_CLEAR_NEF | SMARTCARD_CLEAR_PEF | SMARTCARD_CLEAR_FEF |
|
|
SMARTCARD_CLEAR_RTOF | SMARTCARD_CLEAR_EOBF);
|
|
|
|
/* Restore hsmartcard->gState and hsmartcard->RxState to Ready */
|
|
hsmartcard->gState = HAL_SMARTCARD_STATE_READY;
|
|
hsmartcard->RxState = HAL_SMARTCARD_STATE_READY;
|
|
|
|
#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1)
|
|
/* Call registered Abort complete callback */
|
|
hsmartcard->AbortCpltCallback(hsmartcard);
|
|
#else
|
|
/* Call legacy weak Abort complete callback */
|
|
HAL_SMARTCARD_AbortCpltCallback(hsmartcard);
|
|
#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */
|
|
}
|
|
|
|
|
|
/**
|
|
* @brief DMA SMARTCARD Rx communication abort callback, when initiated by user
|
|
* (To be called at end of DMA Rx Abort procedure following user abort request).
|
|
* @note When this callback is executed, User Abort complete call back is called only if no
|
|
* Abort still ongoing for Tx DMA Handle.
|
|
* @param hdma DMA handle.
|
|
* @retval None
|
|
*/
|
|
static void SMARTCARD_DMARxAbortCallback(DMA_HandleTypeDef *hdma)
|
|
{
|
|
SMARTCARD_HandleTypeDef *hsmartcard = (SMARTCARD_HandleTypeDef *)(hdma->Parent);
|
|
|
|
hsmartcard->hdmarx->XferAbortCallback = NULL;
|
|
|
|
/* Check if an Abort process is still ongoing */
|
|
if (hsmartcard->hdmatx != NULL)
|
|
{
|
|
if (hsmartcard->hdmatx->XferAbortCallback != NULL)
|
|
{
|
|
return;
|
|
}
|
|
}
|
|
|
|
/* No Abort process still ongoing : All DMA channels are aborted, call user Abort Complete callback */
|
|
hsmartcard->TxXferCount = 0U;
|
|
hsmartcard->RxXferCount = 0U;
|
|
|
|
/* Reset errorCode */
|
|
hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
|
|
|
|
/* Clear the Error flags in the ICR register */
|
|
__HAL_SMARTCARD_CLEAR_FLAG(hsmartcard,
|
|
SMARTCARD_CLEAR_OREF | SMARTCARD_CLEAR_NEF | SMARTCARD_CLEAR_PEF | SMARTCARD_CLEAR_FEF |
|
|
SMARTCARD_CLEAR_RTOF | SMARTCARD_CLEAR_EOBF);
|
|
|
|
/* Restore hsmartcard->gState and hsmartcard->RxState to Ready */
|
|
hsmartcard->gState = HAL_SMARTCARD_STATE_READY;
|
|
hsmartcard->RxState = HAL_SMARTCARD_STATE_READY;
|
|
|
|
#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1)
|
|
/* Call registered Abort complete callback */
|
|
hsmartcard->AbortCpltCallback(hsmartcard);
|
|
#else
|
|
/* Call legacy weak Abort complete callback */
|
|
HAL_SMARTCARD_AbortCpltCallback(hsmartcard);
|
|
#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */
|
|
}
|
|
|
|
|
|
/**
|
|
* @brief DMA SMARTCARD Tx communication abort callback, when initiated by user by a call to
|
|
* HAL_SMARTCARD_AbortTransmit_IT API (Abort only Tx transfer)
|
|
* (This callback is executed at end of DMA Tx Abort procedure following user abort request,
|
|
* and leads to user Tx Abort Complete callback execution).
|
|
* @param hdma DMA handle.
|
|
* @retval None
|
|
*/
|
|
static void SMARTCARD_DMATxOnlyAbortCallback(DMA_HandleTypeDef *hdma)
|
|
{
|
|
SMARTCARD_HandleTypeDef *hsmartcard = (SMARTCARD_HandleTypeDef *)(hdma->Parent);
|
|
|
|
hsmartcard->TxXferCount = 0U;
|
|
|
|
/* Clear the Error flags in the ICR register */
|
|
__HAL_SMARTCARD_CLEAR_FLAG(hsmartcard, SMARTCARD_CLEAR_FEF);
|
|
|
|
/* Restore hsmartcard->gState to Ready */
|
|
hsmartcard->gState = HAL_SMARTCARD_STATE_READY;
|
|
|
|
#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1)
|
|
/* Call registered Abort Transmit Complete Callback */
|
|
hsmartcard->AbortTransmitCpltCallback(hsmartcard);
|
|
#else
|
|
/* Call legacy weak Abort Transmit Complete Callback */
|
|
HAL_SMARTCARD_AbortTransmitCpltCallback(hsmartcard);
|
|
#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */
|
|
}
|
|
|
|
/**
|
|
* @brief DMA SMARTCARD Rx communication abort callback, when initiated by user by a call to
|
|
* HAL_SMARTCARD_AbortReceive_IT API (Abort only Rx transfer)
|
|
* (This callback is executed at end of DMA Rx Abort procedure following user abort request,
|
|
* and leads to user Rx Abort Complete callback execution).
|
|
* @param hdma DMA handle.
|
|
* @retval None
|
|
*/
|
|
static void SMARTCARD_DMARxOnlyAbortCallback(DMA_HandleTypeDef *hdma)
|
|
{
|
|
SMARTCARD_HandleTypeDef *hsmartcard = (SMARTCARD_HandleTypeDef *)(hdma->Parent);
|
|
|
|
hsmartcard->RxXferCount = 0U;
|
|
|
|
/* Clear the Error flags in the ICR register */
|
|
__HAL_SMARTCARD_CLEAR_FLAG(hsmartcard,
|
|
SMARTCARD_CLEAR_OREF | SMARTCARD_CLEAR_NEF | SMARTCARD_CLEAR_PEF | SMARTCARD_CLEAR_FEF |
|
|
SMARTCARD_CLEAR_RTOF | SMARTCARD_CLEAR_EOBF);
|
|
|
|
/* Restore hsmartcard->RxState to Ready */
|
|
hsmartcard->RxState = HAL_SMARTCARD_STATE_READY;
|
|
|
|
#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1)
|
|
/* Call registered Abort Receive Complete Callback */
|
|
hsmartcard->AbortReceiveCpltCallback(hsmartcard);
|
|
#else
|
|
/* Call legacy weak Abort Receive Complete Callback */
|
|
HAL_SMARTCARD_AbortReceiveCpltCallback(hsmartcard);
|
|
#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */
|
|
}
|
|
|
|
/**
|
|
* @brief Send an amount of data in non-blocking mode.
|
|
* @note Function called under interruption only, once
|
|
* interruptions have been enabled by HAL_SMARTCARD_Transmit_IT().
|
|
* @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
|
|
* the configuration information for the specified SMARTCARD module.
|
|
* @retval None
|
|
*/
|
|
static void SMARTCARD_TxISR(SMARTCARD_HandleTypeDef *hsmartcard)
|
|
{
|
|
/* Check that a Tx process is ongoing */
|
|
if (hsmartcard->gState == HAL_SMARTCARD_STATE_BUSY_TX)
|
|
{
|
|
if (hsmartcard->TxXferCount == 0U)
|
|
{
|
|
/* Disable the SMARTCARD Transmit Data Register Empty Interrupt */
|
|
CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_TXEIE);
|
|
|
|
/* Enable the SMARTCARD Transmit Complete Interrupt */
|
|
__HAL_SMARTCARD_ENABLE_IT(hsmartcard, hsmartcard->AdvancedInit.TxCompletionIndication);
|
|
}
|
|
else
|
|
{
|
|
hsmartcard->Instance->TDR = (uint8_t)(*hsmartcard->pTxBuffPtr & 0xFFU);
|
|
hsmartcard->pTxBuffPtr++;
|
|
hsmartcard->TxXferCount--;
|
|
}
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Wrap up transmission in non-blocking mode.
|
|
* @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
|
|
* the configuration information for the specified SMARTCARD module.
|
|
* @retval None
|
|
*/
|
|
static void SMARTCARD_EndTransmit_IT(SMARTCARD_HandleTypeDef *hsmartcard)
|
|
{
|
|
/* Disable the SMARTCARD Transmit Complete Interrupt */
|
|
__HAL_SMARTCARD_DISABLE_IT(hsmartcard, hsmartcard->AdvancedInit.TxCompletionIndication);
|
|
|
|
/* Check if a receive process is ongoing or not. If not disable ERR IT */
|
|
if (hsmartcard->RxState == HAL_SMARTCARD_STATE_READY)
|
|
{
|
|
/* Disable the SMARTCARD Error Interrupt: (Frame error) */
|
|
CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE);
|
|
}
|
|
|
|
/* Disable the Peripheral first to update mode */
|
|
CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_UE);
|
|
if ((hsmartcard->Init.Mode == SMARTCARD_MODE_TX)
|
|
&& (hsmartcard->Init.NACKEnable == SMARTCARD_NACK_ENABLE))
|
|
{
|
|
/* In case of TX only mode, if NACK is enabled, receiver block has been enabled
|
|
for Transmit phase. Disable this receiver block. */
|
|
CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_RE);
|
|
}
|
|
if ((hsmartcard->Init.Mode == SMARTCARD_MODE_TX_RX)
|
|
|| (hsmartcard->Init.NACKEnable == SMARTCARD_NACK_ENABLE))
|
|
{
|
|
/* Perform a TX FIFO Flush at end of Tx phase, as all sent bytes are appearing in Rx Data register */
|
|
__HAL_SMARTCARD_FLUSH_DRREGISTER(hsmartcard);
|
|
}
|
|
SET_BIT(hsmartcard->Instance->CR1, USART_CR1_UE);
|
|
|
|
/* Tx process is ended, restore hsmartcard->gState to Ready */
|
|
hsmartcard->gState = HAL_SMARTCARD_STATE_READY;
|
|
|
|
/* Clear TxISR function pointer */
|
|
hsmartcard->TxISR = NULL;
|
|
|
|
#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1)
|
|
/* Call registered Tx complete callback */
|
|
hsmartcard->TxCpltCallback(hsmartcard);
|
|
#else
|
|
/* Call legacy weak Tx complete callback */
|
|
HAL_SMARTCARD_TxCpltCallback(hsmartcard);
|
|
#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */
|
|
}
|
|
|
|
/**
|
|
* @brief Receive an amount of data in non-blocking mode.
|
|
* @note Function called under interruption only, once
|
|
* interruptions have been enabled by HAL_SMARTCARD_Receive_IT().
|
|
* @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
|
|
* the configuration information for the specified SMARTCARD module.
|
|
* @retval None
|
|
*/
|
|
static void SMARTCARD_RxISR(SMARTCARD_HandleTypeDef *hsmartcard)
|
|
{
|
|
/* Check that a Rx process is ongoing */
|
|
if (hsmartcard->RxState == HAL_SMARTCARD_STATE_BUSY_RX)
|
|
{
|
|
*hsmartcard->pRxBuffPtr = (uint8_t)(hsmartcard->Instance->RDR & (uint8_t)0xFF);
|
|
hsmartcard->pRxBuffPtr++;
|
|
|
|
hsmartcard->RxXferCount--;
|
|
if (hsmartcard->RxXferCount == 0U)
|
|
{
|
|
CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_RXNEIE);
|
|
|
|
/* Check if a transmit process is ongoing or not. If not disable ERR IT */
|
|
if (hsmartcard->gState == HAL_SMARTCARD_STATE_READY)
|
|
{
|
|
/* Disable the SMARTCARD Error Interrupt: (Frame error, noise error, overrun error) */
|
|
CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE);
|
|
}
|
|
|
|
/* Disable the SMARTCARD Parity Error Interrupt */
|
|
CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_PEIE);
|
|
|
|
hsmartcard->RxState = HAL_SMARTCARD_STATE_READY;
|
|
|
|
/* Clear RxISR function pointer */
|
|
hsmartcard->RxISR = NULL;
|
|
|
|
#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1)
|
|
/* Call registered Rx complete callback */
|
|
hsmartcard->RxCpltCallback(hsmartcard);
|
|
#else
|
|
/* Call legacy weak Rx complete callback */
|
|
HAL_SMARTCARD_RxCpltCallback(hsmartcard);
|
|
#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */
|
|
}
|
|
}
|
|
else
|
|
{
|
|
/* Clear RXNE interrupt flag */
|
|
__HAL_SMARTCARD_SEND_REQ(hsmartcard, SMARTCARD_RXDATA_FLUSH_REQUEST);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
#endif /* HAL_SMARTCARD_MODULE_ENABLED */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|